| Age | Commit message (Collapse) | Author |
|---|
|
Change RTS and TXD pins on UART 0 to be inputs only on GTA02.
On GTA01 the UART 0 maybe used otherwise.
[ Werner: removed unexplained addition of DEBUG, Documentation/CodingStyle
lines 105, 224, and 448. ]
Signed-off-by: Tim Niemeyer <reddog@mastersword.de>
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
The current version of CPU detection patch from Mark Brown and
Kyungmin Park takes a dump on system_rev. This patch changes it
to retain the low 16 of system_rev from the bootloader ATAG, and
adds access #defines and changes to use them.
No doubt they'll issue a better version of the CPU detection
patch and then this can be reverted.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch cleans some cruft from neo1973-pm-gsm.c and makes
some changes to the power code for gsm.
First, on probe it enforces GSM is OFF.
Second, when GSM is OFF, it changes the RTS and TXD pins on
UART 0 to be inputs, instead of driving into a dead subsystem
and costing us ~70mA @ 5V constant dissipation (these 3.3V pins
were found at 1.5V due to that).
Third it asserts the GPIO peripheral function when ON, to keep
the same flow for the new interrupt generation workaround code.
Since several people worked on this area before, and maybe the
assertion of GSM OFF is different (it's OFF from bootloader though)
or maybe something else gets broken, I send the patch for comment
before applying it.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This implements a proper scheme of controlling powering on of the Calypso
GSM modem which should be activated with a "push-button" connected to
MODEM_ON line.
Also a workaround for firmware bug of moko10 and earlier implemented to
force calypso to pull IRQ line down after powering on.
The "reset" sysfs node is left for compatibility with userspace (without it
gsm0710muxd breaks) but it does nothing (NC on hardware level on GTA02
anyway).
I tested flashing the GSM firmware (on GTA02) with this patch (using only
fluid and power_on node) and can confirm that it's working as reliably as
with accessing gpio directly per instructions.
The credit goes to Joerg Reisenweber for discussions and clarifications on
how this should be done properly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
hes-tracking-fix-stray-endmenu-patch-1232632040-1232632141
pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040
stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch
mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Changes related to pcf50633_mfd.patch
|
|
Eliminate pcf50633_global and hence make pcf50633.c work with
multiple devices. pcf50633 is no longer a paltform device, but
an i2c device.
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This patch removes a large number of #ifdefs that switch on machine
model. Where applicable, the machine_is_* idiom is favoured; this
mainly makes the code easier to read, but it does have some other
advantages, too.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
These fixes are required to build without MACH_NEO1973_GTA02
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This cleans out some random externs in C files that checkpatch does not like
and introduces a couple of .h files to contain them. Plus some other minor
checkpatch style complaints.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch ensures that no console data will go the UART while
the GSM mux is switched to the GSM. This is necessary despite
the code that disables the console due to the fact that the
console resumes before the neo1973_pm_gsm driver, and consoles
always resume in the "on" state.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Add the basic GSM flowcontrol code.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Suggested-by: Sean McNeil <sean@mcneil.com>
To see if some subtle race is involved, Sean has tried
removing syslog traffic during resume and found he was
not seeing the resume crash any more. We're giving it
a try to see if it changes the behaviour for anyone
else. It would mean we have a pretty fine race in there
somewhere.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
- Any setting of any PIN on bank B will undo the LED setting.
Introduce neo1973_gpb_set_pin to set the PIN in a way not losing
the LED or any other shadowed setting.
- Update users of GPBXY for gta01 and gta02.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
The bluetooth enable and modem reset switched the order in
gta02. Do not poke the bluetooth dongle when we want to reset
the modem.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
If we build a kernel without gta01/gta02 the
machine_is_ macro will expand to (0) and the compiler will
optimize the if (0) {} away.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Only enable or disable the interrupt if we see we are in the opposing state.
Also force that damn GSM download signal deasserted on probe at the time we
set the logical state for it to deasserted.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
GTA02_GPIO_nDL_GSM defaults to high/1. On resume do not enable the DL_GSM if
it was not enabled before. This is stopping the storm of interrupts.
Fix the logic in the download file handling. Downloads are disabled (0) when
the GTA02_GPIO_nDL_GSM is high (1). To enable downloading set
GTA02_GPIO_nDL_GSM to low (0, !on). Disable the jack interrupt while download
the is active. When disabling download we will get a couple of jack interrupts
but this is hardly avoidable.
Avoid reading the GPIO value if we do not even have a console set.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
|
|
[PATCH] Neo1973 GPS / GSM / Bluetooth power control via sysfs
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
