aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-s3c
AgeCommit message (Collapse)Author
2008-10-31[ARM] S3C: Add i2c1 device definitionBen Dooks
Add device definition and support functions for the second i2c device (i2c1). If this is selected, the first i2c bus will become index 0 instead of index -1. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Make i2c device definition common to plat-s3cBen Dooks
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Add SDHCI (HSMMC) channel 1 device definitionBen Dooks
Add device definition and support code for the Samsung HSMMC channel 1 device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C6410: Add helper for setting SDHCI device informationBen Dooks
Add the necessary helper functions for setting up the SDHCI device information. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Add Samsung SDHCI register definitionsBen Dooks
Add the specific register definitions for the Samsung SDHCI (HSMMC) block for the S3C2443 and S3C64XX series. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Add new GPIO configuration callsBen Dooks
Add new GPIO configuration calls that mesh with the new gpiolib support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Add GPIO chip trackingBen Dooks
The gpiolib driver keeps its chip array to itself and having a separate array for s3c-only gpios stops any non-s3c gpio being used in one of the s3c specific configuration calls. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Move common GPIO code from plat-s3c24xxBen Dooks
Move the common parts of the GPIO code into plat-s3c for use with both the s3c24xx and s3c64xx systems. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C64XX: Add gpio bank numberingBen Dooks
Define the gpio numbers for the S3C64XX GPIO banks available on the S3C6400 and S3C6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Move HSMMC device definition to plat-s3ecBen Dooks
Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31Merge branch 's3c-moves2' into s3c64xxBen Dooks
2008-10-30[ARM] S3C: Move regs-ac97.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/platBen Dooks
Move nand headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-rtc.h to arch/arm/plat-s3c/include/platBen Dooks
Move regs-rtc.h to arch/arm/plat-s3c/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.Ben Dooks
Move the i2c headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-watchdog.h to arch/arm/plat-s3c/include/platBen Dooks
Move regs-watchdog.h to arch/arm/plat-s3c/include/plat ready to clean out the old include directories Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: BUG_ON() if clock has already been registeredBen Dooks
Add a simple check when registering a clock on whether the clock has already been added to the list. Any attempt to re-register a clock will cause the clock list to be come looped and thus produces silent failures when looking up clocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCsBen Dooks
Add support to the Samsung serial driver for the S3C6400 and S3C6410 serial ports. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Clock support for S3C6400/S3C6410Ben Dooks
Add the PLL clock initialisation and clock registration and include the clocks sourced via CLKDIVx for most of the on-chip peripherals. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Add TICK_MAX for timer codeBen Dooks
Add TICK_MAX definition for the timer code as the S3C64XX series have 32bit capable PWM timers. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Add initial clock frameworkBen Dooks
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Map timer memory and interruptsBen Dooks
Add the physical to virtual memory mapping and the necessary interrupt demuxing for the PWM timer blocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Fix PWM build on S3C6400Ben Dooks
The pwm-clock.c needs <mach/map.h> which is included via other means on S3C24XX systems, so ensure it is explicitly included. Remove the includes of regs-clock.h and regs-gpio.h as these are not needed by the build. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Move pwm-clock.c to arch/arm/plat-s3cBen Dooks
Move pwm-clock.c to arch/arm/plat-s3c to be shared with the S3C64XX implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Move core clock support to plat-s3cBen Dooks
Move the core clock registration and definitions in arch/arm/plat-s3c24xx/clock.c to arch/arm/plat-s3c to be shared with the S3C64XX implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Move time.c to arch/arm/plat-s3cBen Dooks
Move time.c to arch/arm/plat-s3c to be shared with the S3C64XX implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Add VIC0 and VIC1 sourced interriptsBen Dooks
Add and initialise the two VIC (PL192) found on the S3C64XX series CPUs. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Move S3C2410_EXTINT to common regs-irqtype.h headerBen Dooks
Add a common include file (regs-irqtype.h) for the IRQ trigger control register values S3C2410_EXTINT*. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Add UARTdevice definitionsBen Dooks
Add resources and information for the UART deviecs on the S3C64XX CPUs. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Add system boot-time supportBen Dooks
Add the necessary defines for <mach/uncompress.h> to function and build an working header code block. Signed-off-by: Ben Doioks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24XX: Move headers from plat-s3c24xx to plat-s3cBen Dooks
Move clock.h, cpu.h and devs.h to plat-s3c for use with the s3c64xx support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C64XX: Initial arch directoryBen Dooks
Add the initial PLAT_S3C64XX support files and directory structure. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24A0: Initial architecture support filesBen Dooks
Initial architecture support for the S3C24A0 ARCH_S3C24A0. We don't yet add an kconfig entry in the main arch/arm/Kconfig file as the series is not complete, so that is left until enough support is in to be useful. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3cBen Dooks
We need to add plat-s3c to the build to get the headers that will go in here once moved from include/asm-arm so we may as well put some useful common s3c code in here to stop the errors generated form having nothing built. The cpu setup is now passed the cpu idcode and the table of supported cpus to s3c_init_cpu() to abstract the cpu identification out of the initial io setup. As well as moving the cpu initialisation code, we move the map of the board specific items up to the calling code as none of the map_io() functions actually do anything other than pass this to iotable_init(). This patch does not rename any of the init functions that will be common to s3c24xx and any other s3c architectures as this can be done at a later date as it will touch all the board support files which use functions such as s3c24xx_init_clocks() and s3c24xx_init_uarts(). Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h still has functions that are used by both the cpu and board initialisation functions. This means that each board has definitions specific to the cpu support included and the vice-versa. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24A0: Serial port definitions and driver support.Sandeep Patil
Add serial support for S3C24A0, based on current S3C2410 UART driver. It adds necessary new defines in regs-serial.h for S3C24A0 and the code to support this device in drivers/serial/s3c24a0.c Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24XX: Add default <mach/io.h> headerBen Dooks
Add a default header for <mach/io.h> for systems such as the S3C24A0 which do not need any of the complex code that the S3C2410 uses. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24XX: Move vmalloc.h to plat-s3cBen Dooks
vmalloc.h is common across all the current s3c platforms, so move it to arch/arm/plat-s3c/include/mach to be used for all the targets. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Make <mach/timex.h> commonBen Dooks
Move <mach/timex.h> to arch/arm/plat-s3c/include/mach/timex.h so it can be the default for all S3C based architectures. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410Ben Dooks
Split the map.h definitions into common S3C24XX code by adding arch/arm/plat-s3c24xx/include/plat/map.h and altering the machine specific header for the S3C24A0. As we add a new <plat/map.h> we move the original one in arch/arm/plat-s3c include directory to be called map-base.h to distinguish the two files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C24A0: Debug macro definitionsBen Dooks
Add the necessary debug macros for the S3C24A0 to enable kernel debugging, and fix a bug with selecting the wrong default debug implementation from the base include. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Add <plat/cpu-freq.h> for initial cpufreq definitionsBen Dooks
This is the header file that defines the basic cpu frequency scalling support for the Samsung S3C series of SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07[ARM] S3C24XX: Additional include movesBen Dooks
Continue moving the include files into arch/arm Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*Ben Dooks
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2007-07-22[ARM] 4518/1: S3C: Rename watchdog configuration optionsBen Dooks
Rename the S3C24XX configuration options for the watchdog boot controls for moving to the arch/arm/plat-s3c moves. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORTBen Dooks
Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT to be CONFIG_S3C_LOWLEVEL_UART_PORT as we move to using plat-s3c for base of S3C operations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU supportBen Dooks
Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4509/1: S3C: Create initial arch/arm/plat-s3cBen Dooks
Create the initial arch/arm/plat-s3c directory and start linking it into the arch/arm build heirarchy ready to receive the generic parts of the S3C24XX support to be used when adding S3C6400 devices. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>