aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2008-11-11iop-adma: use iop_paranoia() for debug BUG_ONsDan Williams
Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-06Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-11-06Merge branch 'fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
2008-11-06[ARM] xsc3: fix xsc3_l2_inv_rangeDan Williams
When 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. So check for (start < end) which will not walk off into invalid address ranges when (start > end). This issue was caught by drivers/dma/dmatest. 2.6.27 is susceptible. Cc: <stable@kernel.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-06[ARM] mm: fix page table initializationRussell King
As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06[ARM] fix naming of MODULE_START / MODULE_ENDRussell King
As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-04ARM: OMAP: Fix define for twl4030 irqsTony Lindgren
Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bitsTony Lindgren
On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omapZhaolei
debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Comparing to PATCH v1, because clk_debugfs_init is included in "#if defined CONFIG_DEBUG_FS", we only need to check NULL return. Thanks Li Zefan <lizf@cn.fujitsu.com> debugfs_create_u8() and other function's return value's checking method are also fixed in this patch. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix compiler warnings in gpmc.cSanjeev Premi
Fix these compiler warnings: gpmc.c: In function 'gpmc_init': gpmc.c:432: warning: 'return' with a value, in function returning void gpmc.c:439: warning: 'return' with a value, in function returning void Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04[ARM] fix VFP+softfloat binariesRussell King
2.6.28-rc tightened up the ELF architecture checks on ARM. For non-EABI it only allows VFP if the hardware supports it. However, the kernel fails to also inspect the soft-float flag, so it incorrectly rejects binaries using soft-VFP. The fix is simple: also check that EF_ARM_SOFT_FLOAT isn't set before rejecting VFP binaries on non-VFP hardware. Acked-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] 5326/1: AFEB9260: Fix for i2c_board_info structureSergey Lapin
i2c_board_info array was filled incorrectly. Due to circumstances, the way it is filled works. This patch fills array properly. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'for-rmk-rc' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6
2008-10-30[ARM] mx31ads: Add missing includeSascha Hauer
mx31ads_defconfig compilation failed with arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart': arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function) arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.) make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1 Add missing include Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR.Darius Augulis
The Data register holds the value we have written to a gpio. To get the input value we must read the Pad Status Register MX3 (or Sample Status register in MX1/2 terms) Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MX3: Use ioremap wrapper to map SoC devices nonsharedSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] gpio_free might sleep, arm architectureUwe Kleine-König
According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the arm architecture. DaVinci is skipped on purpose to simplify the merge process for patches switching it over to use gpiolib as per request by David Brownell. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] ep93xx: fix OHCI DMA maskMatthias Kaehlcke
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-10-30[ARM] sharpsl_pm: fix compilation w/o CONFIG_PMDmitry Baryshkov
Fix compilation of sharpsl_pm when CONFIG_PM in unselected. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-30[ARM] pcm037: map AIPS1 and AIPS2 as nonshared areaSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-29[ARM] corgi_lcd: fix simultaneous compilation with corgi_blDmitry Baryshkov
corgi_lcd has symbol conflict with corgi_bl driver. Fix it by renaming common symbol in new corgi_lcd driver. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-29[ARM] pxa/spitz: fix spi cs on spitzDmitry Baryshkov
On spitz configure SPI CS GPIOs as outputs to unbreak spi chip selection. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-27Merge commit 'v2.6.28-rc2' into tracing/urgentIngo Molnar
2008-10-24[ARM] xsc3: revert writethrough memory-type encoding changeDan Williams
Commit 40df2d1d "[ARM] Update Xscale and Xscale3 PTE mappings" was fingered by git-bisect for a boot failure on iop13xx. The change made L_PTE_MT_WRITETHROUGH mappings L2-uncacheable. Russell points out that this mapping is used for the vector page. Given the regression, and the fact this page is used often, restore the old behaviour. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: corgi backlight driver should not select ssp drivers [ARM] 5321/1: Kirkwood: fix typo in Makefile [ARM] 5320/1: fix assembly constraints in implementation of do_div() [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S [ARM] 5316/1: AT91: oops (regression) fix on gpio irq [ARM] msm: vreg interface to msm7k pmic [ARM] msm: dma: various basic dma improvements and bugfixes [ARM] msm: clock: provide clk_*() api support for [ARM] msm: clean up iomap and devices [ARM] msm: add proc_comm support, necessary for clock and power control [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-23Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC backlight: da903x: Add backlight driver for DA9030/DA9034 tosa: add support for bl/lcd driver backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-23[ARM] 5321/1: Kirkwood: fix typo in MakefileNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-23Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits) uwb: wrong sizeof argument in mac address compare uwb: don't use printk_ratelimit() so often uwb: use kcalloc where appropriate uwb: use time_after() when purging stale beacons uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems uwb: add entries in the MAINTAINERS file uwb: depend on EXPERIMENTAL wusb: wusb-cbaf (CBA driver) sysfs ABI simplification uwb: document UWB and WUSB sysfs files uwb: add symlinks in sysfs between radio controllers and PALs uwb: dont tranmit identification IEs uwb: i1480/GUWA100U: fix firmware download issues uwb: i1480: remove MAC/PHY information checking function uwb: add Intel i1480 HWA to the UWB RC quirk table uwb: disable command/event filtering for D-Link DUB-1210 uwb: initialize the debug sub-system uwb: Fix handling IEs with empty IE data in uwb_est_get_size() wusb: fix bmRequestType for Abort RPipe request wusb: fix error path for wusb_set_dev_addr() wusb: add HWA host controller driver ...
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] clps711x: add sparsemem definitions [ARM] 5315/1: Fix section mismatch warning (sa1111) [ARM] Orion: activate workaround for 88f6183 SPI clock erratum [ARM] Orion: instantiate the dsa switch driver [ARM] mv78xx0: force link speed/duplex on eth2/eth3 [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c [ARM] balance parenthesis in header file [ARM] pxa: fix trizeps PCMCIA build [ARM] pxa: fix trizeps defconfig [ARM] dmabounce requires ZONE_DMA [ARM] 5303/1: period_cycles should be greater than 1 [ARM] 5310/1: Fix cache flush functions for ARMv4 [ARM] pxa: fix 3bca103a1e658d23737d20e1989139d9ca8973bf [ARM] pxa: fix redefinition of NR_IRQS [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c [ARM] S3C2443: Fix HCLK rate [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL [ARM] S3C24XX: pwm-clock set_parent mask fix
2008-10-23ftrace: remove mcount setSteven Rostedt
The arch dependent function ftrace_mcount_set was only used by the daemon start up code. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: disable dynamic ftrace for all archs that use daemonSteven Rostedt
The ftrace daemon is complex and can cause nasty races if something goes wrong. Since it affects all of the kernel, this patch disables dynamic ftrace from any arch that depends on the daemon. Until the archs are ported over to the new MCOUNT_RECORD method, I am disabling dynamic ftrace from them. Note: I am leaving in the arch/<arch>/kernel/ftrace.c code alone since that can be used when the arch is ported to MCOUNT_RECORD. To port the arch to MCOUNT_RECORD, the scripts/recordmcount.pl needs to be updated. I will make that easier to do for 2.6.29. For 28, we will keep the archs disabled. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23[ARM] 5320/1: fix assembly constraints in implementation of do_div()Nicolas Pitre
Those inline assembly segments using the umlal instruction must have the & modifier so to be sure that a purely input register won't alias one of the registers used as input+output. In most cases, the inputs are still used after the outputs are touched, and most binutil versions insist on "rdhi, rdlo and rm must all be different" even for ARMv6+. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22[ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.SCatalin Marinas
A typo caused these values to be swapped leading to incorrect memory type attributes. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22[ARM] 5316/1: AT91: oops (regression) fix on gpio irqDavid Brownell
From: David Brownell <dbrownell@users.sourceforge.net> The "5298/1: Drop desc_handle_irq()" patch went overboard and deleted an essential line of code, causing all AT91 GPIO interrupts to oops (in irq). Trimmed example: Unable to handle kernel NULL pointer dereference at virtual address 000000c4 ... PC is at gpio_irq_handler+0x78/0xd0 LR is at gpio_irq_handler+0x38/0xd0 ... Backtrace: [<c0029884>] (gpio_irq_handler+0x0/0xd0) from [<c0020054>] (__exception_text_start+0x54/0x7c) [<c0020000>] (__exception_text_start+0x0/0x7c) from [<c00209ec>] (__irq_svc+0x2c/0x60) Exception stack(0xc1c1de00 to 0xc1c1de48) [<c01f4ca8>] (_spin_unlock_irq+0x0/0x3c) from [<c01389f8>] (at91ether_open+0x220/0x318) [<c01387d8>] (at91ether_open+0x0/0x318) from [<c018caa4>] (dev_open+0xa8/0x10c) [<c018c9fc>] (dev_open+0x0/0x10c) from [<c018b874>] (dev_change_flags+0x98/0x164) [<c018b7dc>] (dev_change_flags+0x0/0x164) from [<c0019f8c>] (ip_auto_config+0x164/0xe28) [<c0019e28>] (ip_auto_config+0x0/0xe28) from [<c0020318>] (__exception_text_end+0x60/0x180) [<c00202b8>] (__exception_text_end+0x0/0x180) from [<c0008738>] (kernel_init+0x70/0xd8) [<c00086c8>] (kernel_init+0x0/0xd8) from [<c00398e0>] (do_exit+0x0/0x6ac) This patch restores the missing line'o'code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22Merge branch 'for-rmk' of git://git.android.com/kernel into develRussell King
2008-10-22Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-10-22[ARM] msm: vreg interface to msm7k pmicBrian Swetland
The baseband cpu owns the pmic, so voltage regulator control is only available via a relatively limited interface through the proc_comm transport. Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22[ARM] msm: dma: various basic dma improvements and bugfixesBrian Swetland
San: - Propagate DM errors to the originator of the request. - Implement msm_dmov_stop_cmd() - Add return value to init code - Modify msm_dmov_stop_cmd() to support ungraceful flushing Arve: - Disable datamover interrupt when not in use. We turn off the interrrupt to allow power collapse from idle. Signed-off-by: San Mehat <san@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22[ARM] msm: clock: provide clk_*() api support forBrian Swetland
Makes use of the proc_comm interface to provide clock control on MSM7X01A family SoCs. Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22[ARM] msm: clean up iomap and devicesBrian Swetland
- Add some more peripherals (sdcc, etc) to the iomap. - Remove virtual base addresses for devices that we should be passing physical addresses to drivers via resources and ioremap()ing. - don't try to use uarts for ll debug once the mmu is enabled due to problems with the peripheral window - make base addresses void __iomem * and fixup irq.c and timer.c - Remove common.c and bring in devices.c/devices.h similar to the PXA architecture. Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22[ARM] msm: add proc_comm support, necessary for clock and power controlBrian Swetland
The proc_comm protocol is the lowest level protocol available for communicating with the modem core. It provides access to clock and power control, among other things, and is safe for use from atomic contexts, unlike the higher level SMD and RPC transports. Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22[ARM] msm: rename ARCH_MSM7X00A to ARCH_MSMBrian Swetland
The MSM architecture covers a wider family of chips than just the MSM7X00A. Move to a more generic name, in perparation for supporting the specific SoC variants as sub-architectures (ARCH_MSM7X01A, ARCH_MSM722X, etc). This gives us ARCH_MSM for the (many) common peripherals. This also removes the unused/obsolete config item MSM7X00A_IDLE. Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22Merge branch 'tracing/ftrace' into tracing/urgentIngo Molnar
2008-10-21[ARM] clps711x: add sparsemem definitionsRussell King
Fix the edb7211_defconfig build errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-21[ARM] 5315/1: Fix section mismatch warning (sa1111)Kristoffer Ericson
This patch fixes the section mismatch warning from sa1111.o at buildtime. CC arch/arm/common/sa1111.o LD arch/arm/common/built-in.o LD vmlinux.o MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x87f4): Section mismatch in reference from the function sa1111_probe() to the function .devinit.text:sa1110_mb_enable() The function sa1111_probe() references the function __devinit sa1110_mb_enable(). This is often because sa1111_probe lacks a __devinit annotation or the annotation of sa1110_mb_enable is wrong. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-21[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.hMariusz Kozlowski
Hello, Introduced by: commit fff147208b48680cb7b627a144113a6585828a0e Author: Eric Miao <eric.miao@marvell.com> Date: Fri Sep 5 22:15:23 2008 +0800 Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21[ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based driversEric Miao
Recent changes have been made to use the generic SPI-based ads7846 touch screen driver and a generic SPI-based corgi-type LCD/backlight driver. Update the {corgi,spitz}_defconfig to favor the use of these drivers instead of the legacy ones. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfigEric Miao
Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"Eric Miao
This reverts commit 68677ab3d08ed6d57be0c1ae4e4d364bb2d104b6. A smoother migration path would be making corgi_ts.c and other drivers depending on corgi_ssp.c and corgi_lcd.c to depend on BROKEN instead, and still allows those to exist around for some time. Signed-off-by: Eric Miao <eric.miao@marvell.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 14:00:29 +0000