aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-08-14mxc pwm: add mx25 supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14iomux-v3: Allow for a runtime base addressSascha Hauer
also, check for a valid pad_ctrl_ofs before changing the pad control register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: i.MX25 timer supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: use variable for irq controller base in entry-macro.SSascha Hauer
This allows us to determine the irq controller base address on runtime. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14ARM: MX3: add ckil clockDaniel Mack
The CKIL clock source is used by the upcoming RTC driver, so we need to export it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14ARM: mxc: Fix i2c_board_info definitionsSascha Hauer
Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org>
2009-08-07Add support for Eukrea's MBIMX27Eric Benard
MBIMX27 is the evaluation board for CPUIMX27 and integrates : a QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to SDHC1. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07Add support for Eukrea's CPUIMX27Eric Benard
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR, it includes an ethernet PHY in MII mode, an I2C RTC and a ST16554 QuadUART on nCS3. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX27: Add USB platform devices and resourcesjavier Martin
This adds clocks and resources for usb in i.mx27 SoC. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX3: add additional USB pins to iomuxDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07ehci mxc: Fix clocksSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX3: Add USB platform devices and resourcesDaniel Mack
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07[ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEVSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07[ARM] MXC: Switch MX1 to clkdev supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC PLL decoding: calculate mfn value with less magicSascha Hauer
Also, use cpu_is_* macros rather than CONFIG_ARCH_* Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC: pwm driver fixesSascha Hauer
- fix off-by-one error in divider calculation - disable pwm in pwm_disable Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC gpio interrupt support: move register definitions to .c fileSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc gpio: CONFIG_ARCH_* -> cpu_is_*()Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07pcm038: Add support for SJA1000 on baseboardSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07pcm037: Add support for SJA1000 on baseboardSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07imxfb: Add support for multiple displaysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07imxfb: calculate bpix value from bits_per_pixelSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx1: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx3: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx2: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx2: remove mxc_irda platform deviceSascha Hauer
Irda support is handled by the normal ims serial driver, so we do not need this device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC iomux-v3: Fix defines for PAD_CTL registersSascha Hauer
The old defines leaked in from an old version of the patch. Change the defines to match the register layout of the iomuxer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: turn to soc specific init_irq functionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: remove do not include directlySascha Hauer
Everyone should be free to include the files he actually needs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC: remove board specific setup of MXC_LL_UART_[PV]ADDRSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC uncompress macros: determine uart base by machine typeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: remove ARCH_NR_GPIOSSascha Hauer
Use the default value of 256 which is enough for all i.MX SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07system.c: runtime base addressSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC: pass base/irq to mxc_timer_initSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Realview & Versatile: Fix i2c_board_info definitions [ARM] 5608/1: Updated U300 defconfig [ARM] 5606/1: Fix ep93xx watchdog driver headers [ARM] 5594/1: Correct U300 VIC init PM setting [ARM] 5595/1: ep93xx: missing header in dma-m2p.c [ARM] Kirkwood: Correct header define [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines backlight: fix pwm_bl.c to notify platform code when suspending [ARM] pxa: use kzalloc() in pxa_init_gpio_chip() [ARM] pxa: correct I2CPWR clock for pxa3xx pxamci: correct DMA flow control ARM: add support for the EET board, based on the i.MX31 pcm037 module pcm037: add MT9T031 camera support Armadillo 500 add NAND flash device support (resend). ARM MXC: Armadillo 500 add NOR flash device support (resend). mx31: remove duplicated #include
2009-07-18ARM: Realview & Versatile: Fix i2c_board_info definitionsRussell King
Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org>
2009-07-17[ARM] 5608/1: Updated U300 defconfigLinus Walleij
Removed the LBD support that isn't of any use right now at least, then remove remnants of the TCM config flags that somehow crept in by mistake (not yet merged patch for 2.6.32) and then the usual defconfig noise from updated menus. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-10sched: INIT_PREEMPT_COUNTPeter Zijlstra
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-09[ARM] 5594/1: Correct U300 VIC init PM settingLinus Walleij
This makes the VIC resume from suspend flagged IRQ:s identical to the flags indicating all possible interrupts. This is perhaps not the optimal setting but setting it to 0 makes the system suspend and never come back again (all IRQ sources masked off). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5595/1: ep93xx: missing header in dma-m2p.cHartley Sweeten
<linux/io.h> was getting included by <mach/ts72xx.h>, is should be included by this file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2009-07-09Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-07-09Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-07-06[ARM] Kirkwood: Correct header defineSimon Kagstrom
Correct define typo (. -> ,) Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-07-06[ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP definesMike Rapoport
Attepmpt to configure ULPI pins gives the following compile error: CC arch/arm/mach-pxa/cm-x300.o arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_AF0' undeclared here (not in a function) arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_DS01X' undeclared here (not in a function) make[2]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1 make[1]: *** [arch/arm/mach-pxa] Error 2 make: *** [sub-make] Error 2 Fix it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-05[ARM] pgtable: file pte layout documentationRussell King
Document the layout of our file PTE entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] pgtable: swp pte layout documentation, definitions, and checkRussell King
Document the layout of our swp PTE entries, adding definitions for the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK() such that we fail to build if we are unable to properly encode the swp type field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] export __cpu_flush_dcache_pageRussell King
Now required for libsas: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 1096 modules ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-03[ARM] pxa: use kzalloc() in pxa_init_gpio_chip()Daniel Mack
As slab is available early now, use kzalloc() rather than alloc_bootmem_low() in pxa_init_gpio_chip(). This removes the following boot time warning: <4>------------[ cut here ]------------ <4>WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x2c/0x54() <d>Modules linked in: [<c0029430>] (unwind_backtrace+0x0/0xdc) from [<c0036f64>] (warn_slowpath_common+0x4c/0x80) [<c0036f64>] (warn_slowpath_common+0x4c/0x80) from [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) from [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) from [<c000f6e4>] (___alloc_bootmem+0xc/0x34) [<c000f6e4>] (___alloc_bootmem+0xc/0x34) from [<c000cb20>] (pxa_init_gpio+0x48/0x228) [<c000cb20>] (pxa_init_gpio+0x48/0x228) from [<c0009794>] (init_IRQ+0x34/0x44) [<c0009794>] (init_IRQ+0x34/0x44) from [<c00089d4>] (start_kernel+0x144/0x264) [<c00089d4>] (start_kernel+0x144/0x264) from [<a0008034>] (0xa0008034) <4>---[ end trace 1b75b31a2719ed1c ]--- Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-03[ARM] pxa: correct I2CPWR clock for pxa3xxDaniel Mack
In commit f23d4911319fd, the pwr-i2c device name changed due to the newly introduced device table. This patch fixes the clock so the driver's probe will succeed again. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 10:57:47 +0000