aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2006-03-12[ARM] iwmmxt thread state alignmentRussell King
This patch removes the reliance of iwmmxt on hand coded alignments. Since thread_info is always 8K aligned, specifying that fpstate is 8-byte aligned achieves the same effect without needing to resort to hand coded alignments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-10[ARM] 3350/1: Enable 1-wire on ARMAlessandro Zummo
Patch from Alessandro Zummo This patches add the 1-wire drivers to the ARM Kconfig. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-10[ARM] 3356/1: Workaround for the ARM1136 I-cache invalidation problemCatalin Marinas
Patch from Catalin Marinas ARM1136 erratum 371025 (category 2) specifies that, under rare conditions, an invalidate I-cache by MVA (line or range) operation can fail to invalidate a cache line. The recommended workaround is to either invalidate the entire I-cache or invalidate the range by set/way rather than MVA. Note that for a 16K cache size, invalidating a 4K page by set/way is equivalent to invalidating the entire I-cache. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-08[ARM] 3355/1: NSLU2: remove propmt dependsAlessandro Zummo
Patch from Alessandro Zummo The patch that would have made the NSLU2 kernel non compatible with other ixp4xx machs never entered the kernel. So it is actually safe to remove the prompt dependencies. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-08[ARM] 3354/1: NAS100d: fix power led handlingAlessandro Zummo
Patch from Alessandro Zummo Disable GPIO clocks to allow the power led to work properly. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-08[ARM] Fix muldi3.SRussell King
When shifting the low-parts of signed numbers, a logical shift should be used to avoid sign-extending a bit which isn't a sign bit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-07[ARM] 3353/1: NAS100d: protect nas100d_power_exit() with machine_is_nas100d()Alessandro Zummo
Patch from Alessandro Zummo nas100d_power_exit(void) gets some protection to avoid freeing an irq when it is not appropriate to do so. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-07[ARM] 3352/1: DSB required for the completion of a TLB maintenance operationCatalin Marinas
Patch from Catalin Marinas Chapter B2.7.3 in the latest ARM ARM (with v6 information) states that the completion of a TLB maintenance operation is only guaranteed by the execution of a DSB (Data Syncronization Barrier, formerly Data Write Barrier or Drain Write Buffer). Note that a DSB is only needed in the flush_tlb_kernel_* functions since the completion is guaranteed by a mode change (i.e. switching back to user mode) for the flush_tlb_user_* functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-06[PATCH] fix next_timer_interrupt() for hrtimerTony Lindgren
Also from Thomas Gleixner <tglx@linutronix.de> Function next_timer_interrupt() got broken with a recent patch 6ba1b91213e81aa92b5cf7539f7d2a94ff54947c as sys_nanosleep() was moved to hrtimer. This broke things as next_timer_interrupt() did not check hrtimer tree for next event. Function next_timer_interrupt() is needed with dyntick (CONFIG_NO_IDLE_HZ, VST) implementations, as the system can be in idle when next hrtimer event was supposed to happen. At least ARM and S390 currently use next_timer_interrupt(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24[ARM] 3348/1: Disable GPIO interruptsAndrew Victor
Patch from Andrew Victor disable_irq() lazily disables the interrupt, so the IRQ is only disabled once the interrupt occurs again. The GPIO interrupt handler therefore must first check disable_depth to see if the IRQ needs to be disabled. Orignal patch by Bill Gatliff. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3347/1: Bugfix for ixp4xx_set_irq_type()Mårten Wikström
Patch from Mårten Wikström This patch fixes a bug in ixp4xx_set_irq_type() which leads to GPIO being incorrectly set to both edge triggered for raising as well as falling edge interrupt types. See the previous discussion on patch 3312/1. Signed-off-by: Mårten Wikström <marten.wikstrom@passito.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3325/2: GPIO function to control multi-drive (open collector) capabilityAndrew Victor
Patch from Andrew Victor This patch adds the at91_set_multi_drive() function to enable/disable the multi-drive (open collector) pin capability on the AT91RM9200 processor. This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200 board as it will not allow the board reset line to be pulled low if the pullup is not driven as an open collector output as the boards are wired to the USB connector on both the DK/EK. This version of the patch updates it to 2.6.16-rc4. Orignal patch by Jeff Warren. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] CONFIG_CPU_MPCORE -> CONFIG_CPU_32v6KRussell King
CONFIG_CPU_MPCORE has never been a configuration symbol - it should be CONFIG_CPU_32v6K. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3345/1: Fix interday RTC alarmsUli Luckas
Patch from Uli Luckas This is a bugfix. The comment in arch/arm/common/rtctime.c explains it: * FIXME: for now, we just copy the alarm time because we're lazy (and * is therefore buggy - setting a 10am alarm at 8pm will not result in * the alarm triggering.) This patch adds one day to the alarm iff the alarm wrapped beyond midnight and therefore appears to be in the past. Signed-off-by: Uli Luckas <u.luckas@road-gmbh.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3344/1: NSLU2: beeper supportAlessandro Zummo
Patch from Alessandro Zummo This patch adds support for the beeper embedded in the NSLU2 to the machine setup code. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3342/1: NSLU2: Protect power button init routine with machine_is_nslu2()Alessandro Zummo
Patch from Alessandro Zummo The power button exit routine for the Linksys NSLU2 was not protected by a machine_is_nslu2(). This patch fixes it. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] 3340/1: Fix the PCI setup for direct master access to SDRAMCatalin Marinas
Patch from Catalin Marinas The initial code did not configure the inbound memory windows for direct master access to the SDRAM. This patch creates a 1:1 mapping between the Versatile/PB PCI memory windows and its SDRAM. Note that an updated FPGA image is needed for Versatile/PB since the original windows were 1MB and not able to cover the whole SDRAM (now extended to 256MB). The patch also fixes the PCI IRQ mapping for slot #2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] Add panic-on-oops supportRussell King
Although you could ask the kernel for panic-on-oops, it remained non-functional because the architecture specific code fragment had not been implemented. Add it, so it works as advertised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[ARM] 3338/1: old ABI compat: sys_socketcallNicolas Pitre
Patch from Nicolas Pitre Commit 99595d0237926b5aba1fe4c844a011a1ba1ee1f8 forgot to intercept sys_socketcall as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[ARM] 3337/1: Fix NSLU2 flash support according to window size configuration ↵Martin Michlmayr
patch Patch from Martin Michlmayr ARM patch 3226/1 (IXP4xx runtime expansion bus window size configuration) forgot to update mach-ixp4xx/nslu2-setup.c which leads to the following compilation error. Update NSLU2 flash support following patch 3226/1. CC arch/arm/mach-ixp4xx/nslu2-setup.o arch/arm/mach-ixp4xx/nslu2-setup.c:30: error: ‘NSLU2_FLASH_BASE’ undeclared here (not in a function) arch/arm/mach-ixp4xx/nslu2-setup.c:31: error: ‘NSLU2_FLASH_SIZE’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-ixp4xx/nslu2-setup.o] Error 1 make: *** [arch/arm/mach-ixp4xx] Error 2 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> --- nslu2-setup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[ARM] Fix SMP initialisation oopsRussell King
A change to the SMP initialisation caused the following oops: CPU1: Booted secondary processor CPU1: D VIPT write-back cache CPU1: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU1: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets <7>Calibrating delay loop... 83.14 BogoMIPS (lpj=415744) <1>Unable to handle kernel NULL pointer dereference at virtual address 0000001c ... PC is at enqueue_task+0x1c/0x64 LR is at activate_task+0xcc/0xe4 SMP initialisation now requires cpu_possible_map to be initialised in setup_arch(). Move this from smp_prepare_cpus() to smp_init_cpus() and call it from our setup_arch() if CONFIG_SMP is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-15[ARM] remove duplicate #includesHerbert Poetzl
Signed-off-by: Herbert P?tzl <herbert@13thfloor.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-10[ARM] 3326/1: H1940 - Control latchesBen Dooks
Patch from Ben Dooks Define the bits for the two board control latches that control various items on the H1940 iPAQ. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09[ARM] 3314/1: S3C2400 - adds s3c2400.hLucas Correia Villa Real
Patch from Lucas Correia Villa Real This patch adds s3c2400.h, fixing the build for the 2410/2440 platforms. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2006-02-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
Manual conflict merge of arch/arm/Kconfig
2006-02-08[ARM] 3278/1: OMAP: 3/3 Fix low-level io init for omap2 boardsTony Lindgren
Patch from Tony Lindgren This patch fixes the low-level IO init for omap2 boards. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3280/1: OMAP: 2/3 Fix low-level io init for omap1 boardsTony Lindgren
Patch from Tony Lindgren This patch fixes the low-level IO init for omap1 boards. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3279/1: OMAP: 1/3 Fix low-level io initTony Lindgren
Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3299/1: S3C24XX - fix irq range on adc deviceBen Dooks
Patch from Ben Dooks Change the IRQ resource range for the ADC device to be two distinct IRQs Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3313/1: Use OSC4 instead of OSC1 for CLCDCatalin Marinas
Patch from Catalin Marinas Because of a type, OSC1 was used for setting the display clock instead of OSC4. This patch fixes it. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3310/1: add a comment about the possible __kuser_cmpxchg transient falseNicolas Pitre
negative Patch from Nicolas Pitre The pre ARMv5 implementation can be aborted if an exception occurs in the middle of it. Because of that, the ARMv6 implementation doesn't re-attempt the operation on a failed strex either. Let's make this transient nature of such a false positive more explicit in the definition. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3309/1: disable the pre-ARMv5 NPTL kernel helper in the non MMU caseNicolas Pitre
Patch from Nicolas Pitre The cmpxchg emulation on pre-ARMv5 relies on user code executed from a kernel address. If the operation cannot complete atomically, it is aborted from the usr_entry macro by clearing the Z flag. This clearing of the Z flag is done whenever the user pc is above TASK_SIZE. However this "pc >= TASK_SIZE" test cannot work in the non MMU case. Worse: the current code will corrupt the Z flag on every entry to the kernel. Let's disable it in the non MMU case for now. Using NPTL on non MMU targets needs to be worked out anyway. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3308/1: old ABI compat: struct sockaddr_unNicolas Pitre
Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] Experimental config options should have (EXPERIMENTAL)Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3307/1: old ABI compat: mark it experimentalNicolas Pitre
Patch from Nicolas Pitre Although OABI_COMPAT works fine in most cases, it is still experimental and could be for ever since it is nearly impossible to handle everything, e.g. ioctls. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3306/1: S3C24XX - update defconfigBen Dooks
Patch from Ben Dooks Bring s3c2410 defconfig up to date Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3305/1: Minor typographical and spelling fixes in KonfigMartin Michlmayr
Patch from Martin Michlmayr Minor typographical and spelling fixes in Konfig Signed-off-by: Martin Michlmayr <tbm@cyrius.com> --- Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3304/1: Add help descriptions to ARCH config items that don't have oneMartin Michlmayr
Patch from Martin Michlmayr Add help descriptions to ARCH config items that don't have one. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> --- Kconfig | 32 ++++++++++++++++++++++++++++++-- mach-clps711x/Kconfig | 2 ++ 2 files changed, 32 insertions(+), 2 deletions(-) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3303/1: S3C24XX - add clock enable usage countingBen Dooks
Patch from Ben Dooks Move to using an enable count for the shared clocks and protect the clock system using a mutex instead of just disabling IRQs during the clock update. Since there is little more code in the path for non-shared clocks, the enable and disable calls use the same code for each. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3302/1: make pci=firmware the default for ixp2000Lennert Buytenhek
Patch from Lennert Buytenhek Most ixp2000 boards don't actually work if pci=firmware isn't used, so the defconfig isn't really the right place to specify this. Instead of specifying it in the defconfigs, make the relevant board code take care of setting pci=firmware. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3301/1: remove unnecessary clock default from ixdp2801 defconfigLennert Buytenhek
Patch from Lennert Buytenhek The ixdp2x01_clock is already 50MHz by default, so no need to override it with 50MHz in the ixdp2801 defconfig as is done now, which is confusing as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3300/1: make ixdp2x01 co-exist with other ixp2000 machine typesLennert Buytenhek
Patch from Lennert Buytenhek The ixdp2x01 pci init call doesn't check whether it's really running on an ixdp2x01, making it impossible to compile one kernel that works on both the ixdp2x01 and another ixp2000 board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[PATCH] arm: fix dependencies for MTD_XIPAl Viro
MTD_XIP depends on having working asm/mtd-xip.h; it's not just per-architecture (arm-only, as current Kconfig would have it), but actually per-subarch as well. Introduced a new symbol (ARCH_MTD_XIP) set by arch Kconfig; MTD_XIP depends on it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-05[SERIAL] Remove unnecessary serial.h includeRussell King
imx.c does not use anything from serial.h, so remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03[ARM] Remove ARCH_CAMELOT from at91 defconfigsRussell King
ARCH_CAMELOT (excalibur) got removed; remove it from the AT91 defconfigs Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01[ARM] 3286/2: S3C2400 - adds to the table of supported CPUsLucas Correia Villa Real
Patch from Lucas Correia Villa Real Oops, sorry for the typo on name_s3c2400, a new patch is attached. About GSTATUS1, S3C2400 doesn't have that register, so it's not safe to use that memory address to identify its CPU. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01[ARM] 3284/1: S3C2400 - adds support to GPIOLucas Correia Villa Real
Patch from Lucas Correia Villa Real This patch adds support to GPIO on the S3C2400, which is going to be used by the GP32 machine and the SMDK2400 development board. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01[ARM] 3295/1: Fix oprofile init return valueRuss Dill
Patch from Russ Dill The oprofile init code was broken in commit c6b9da. The new logic will always return -ENODEV. This fixes oprofile_arch_init to return 0 on success, and return the return value of spec->init() if applicable. Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>