aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-04-27davinci: DM646x: add interrupt number and prioritiesSudhakar Rajashekhara
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: PSC: Clear bits in MDCTL reg before setting new bitsMark A. Greer
Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: gpio bugfixesDavid Brownell
Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: add EDMA driverKevin Hilman
Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: timers: use clk_get_rate()Kevin Hilman
Use clock framework instead of hard-coded CLOCK_TICK_RATE for determining timer tick frequencies. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add arch_ioremap() which uses existing static mappingsKevin Hilman
Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: major rework of clock, PLL, PSC infrastructureKevin Hilman
This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add runtime CPU detection supportKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add default Kconfig, add HAVE_IDEKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-20Separate out common fstatat code into vfs_fstatatOleg Drokin
This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-17Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-04-17Merge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-04-17[ARM] S3C24XX: ADC: Check pending queue before freeing adc clientRamax Lo
Check pending queue and remove the adc client being released. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C: Fix ADC driver sparse warningBen Dooks
The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c does not need to be exported and thus should be static. This fixes the following sparse warning: adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] Osiris: Fix double initialisation in machine blockBen Dooks
The .init_machine entry in mach-osiris.c had the same entry twice, so remove one definition to fix the following warning from sparse: mach-osiris.c:416:3: warning: Initializer entry defined twice mach-osiris.c:418:3: also defined here Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] Anubis: Fix sparse warnings for items that should be staticBen Dooks
Make 'anubis_ide_platdata' statis as it is not used outside the file it is in, fixing the following sparse warning: mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] JIVE: Fix sparse warnings about items which should be staticBen Dooks
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as they are not exported, and are generating the following sparse warnings: mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static? mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'Ben Dooks
Fix the following sparse warning due to s3c_device_hwmon being missing from <plat/devs.h> devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C24XX: Fix sparse error in gpiolib.cBen Dooks
Fix the following sparse error generated by including <plat/gpio-core.h> instead of <mach/gpio-core.h> gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] 5455/1: Fix IRQ noise from VIC codeLinus Walleij
The VIC code will attempt to perform som default set_irq_chip() and set_irq_chip_data() on all IRQs supported by the VIC, while the new IRQ handling code strictly checks for the global NR_IRQS to be respected also for these IRQs. This patch will respect the interrupt mask passed to the VIC driver and will prevent it from attempting to call these functions on any unused interrupts. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-16Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2009-04-16mxc defconfig updatesSascha Hauer
This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16mx31ads: Mark as having full regulatoion constraints with 1133-EV1 boardMark Brown
This allows the regulator API to power off unused regulators at the end of init. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 boardMark Brown
Otherwise we'd need massive ifdefs in the code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16Fix ifdef in plat-mxc/irc.cDarius Augulis
Move ifdef under function brackets. This fixes compile crach when IRQ priorities are disabled. Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16MX1ADS: remove I2C ifdefsDarius Augulis
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16qong: remove AIPS[12] mappings from machine-specific iotableIlya Yanok
AIPS[12] are no mapped from generic MX3 code so we don't need to map them from machine-specific map_io function anymore. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-04-16mx31ads: imoux pins should be passed in as unsigned intMark Brown
To match the mxc_iomux_setup_multiple_pins() prototype. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16MXC: remove orphan imx_init_uart() definitionPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16mx31: pin definition for csiValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16MX31: pin definition for sdhc2Valentin Longchamp
This also adds the pins used on mx31moboard for WP and CD Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16MX31: Add I2C pin definitionsVladimir Barinov
Add I2C pin definitions for MX31 SoC Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
2009-04-16MX31: Add more alternate pin definitionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16pcm037 board support: Fix eth interrupt gpio settingSascha Hauer
gpio_direction_input needs the gpio number, not the pin description. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16imx21: activate i2cHolger Schurig
Set the correct clkdev-name for the i2c clock. It also get's rid of the ARCH_NR_GPIOS define on the rationale that isn't an ARCH-wide setting anyway. If a device has two pca953x devices, the reserved number will be wrong. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
2009-04-16imx21: fixes some clocknamesHolger Schurig
Signed-off-by: <hs4233@mail.mn-solutions.de>
2009-04-16[ARM] S3C: Export s3c_gpio_cfgpin and s3c_gpio_setpull for modulesBen Dooks
Add an export of the two GPIO configuration calls s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules to use them (such as ASoC drivers) Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] s3c2410_defconfig: Update miscellaneous driversBen Dooks
Update the driver build in the s3c2410_defconfig for the LED, IDE, Input and EEPROM options Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] s3c2410_defconfig: Update USB device driversBen Dooks
Add more USB device driver options to the s3c2410_defconfig, mostly as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] s3c2410_defconfig: Update filesystem optionsBen Dooks
Update the filesystem options in the s3c2410_defconfig, such as building ext4, enable the automounter as modules and update the network filesysyem choices. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] s3c2410_defconfig: Add video/radio driversBen Dooks
Add a set of various video and radio drivers to the s3c2410_defconfig as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] s3c2410_defconfig: Add sound driversBen Dooks
Add sound drivers to the s3c2410_defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16[ARM] 5453/1: fix building breakage of sys_oabi-compat.c due to missing ↵eric miao
kmalloc/kfree It seems that declarations of kmalloc/kfree are missed, explicitly include it. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-15[ARM] s3c2410_defconfig: Add MMC/SD core and driversBen Dooks
Add SD/MMC to the s3c2410_defconfig, building in the core and adding the rest of the drivers as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] s3c2410_defconfig: Update machine configurationBen Dooks
Update the machine configuration of s3c2410_defconfig to add support for newer machines, and update the s3c24xx specific options. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] s3c2410_defconfig: Update network optionsBen Dooks
Update the list of modules being built for the network core of the s3c2410_defconfig. This update adds such items as TCP congestion, netfilter for IPv4 and IPv6. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] s3c2410_defconfig: update to 2.6.30-rc2Ben Dooks
Update arch/arm/configs/s3c2410_defconfig to the latest kernel release (2.6.30-rc2). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] SMDK6410: Request GPIOs for LCD power controlMark Brown
Going forward gpio_request() will be a requirement for GPIO API users so call it for the LCD power GPIOs. With present code the kernel functions but generaets loud WARN_ON()s when using the unrequested GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] S3C: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-09 19:27:49 +0000