aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-03-02Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits) OMAP: DSS2: Taal: Fix TE when resuming OMAP: DSS2: Taal: Fix ESD check OMAP: DSS2: OMAPFB: Constify some function parameters OMAP: DSS2: OMAPFB: install omapfb.h OMAP: DSS2: DSI: add error prints OMAP: DSS2: TPO-TD03MTEA1: fix function names OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE OMAP: DSS2: DSI: remove external TE support OMAP: DSS2: move timing functions OMAP: DSS2: move set/get_wss() OMAP: DSS2: move enable/disable/suspend/resume OMAP: DSS2: move update() and sync() OMAP: DSS2: move set/get_update_mode() OMAP: DSS2: move enable/get_te() OMAP: DSS2: move get_recommended_bpp() OMAP: DSS2: move get_resolution() OMAP: DSS2: move enable/disable_channel to overlay manager OMAP: DSS2: move wait_vsync() OMAP: DSS2: move get/set_rotate() ...
2010-03-02Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits) omap2: Initialize Menelaus and MMC for N8X0 AM3517 EVM: correct typo - tca6416 mispelt as tca6516 AM3517 EVM: Enable I2C support AM35x: Enable OMAP_MUX in defconfig AM35x: Add missing GPIO mux config for EHCI port Zoom3: Defconfig update omap: i2c: Fix muxing for command line enabled bus OMAP4: clock: Remove clock hacks from timer-gp.c OMAP4: clock: Add dummy clock nodes for interface clocks OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck OMAP2+ clock: revise omap2_clk_{disable,enable}() OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code OMAP clockdomain: if no autodeps exist, don't try to add or remove them OMAP hwmod: add hwmod class support OMAP hwmod: convert header files with static allocations into C files OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630 OMAP4 clock: drop the ALWAYS_ENABLED clock flag OMAP clock: drop RATE_FIXED clock flag ...
2010-03-01Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren
Conflicts: arch/arm/plat-omap/Kconfig
2010-03-01Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits) DaVinci DM365: Adding support for SPI EEPROM DaVinci DM365: Adding DM365 SPI support DaVinci DM355: Modifications to DM355 SPI support DaVinci: SPI: Adding header file for SPI support. davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table() DaVinci: DM365: Voice codec support for the DM365 SoC davinci: clock: let clk->set_rate function sleep Add SDA and SCL pin numbers to i2c platform data davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 davinci: build list of unused EDMA events dynamically davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case davinci: Keep count of channel controllers on a platform davinci: Correct return value of edma_alloc_channel api davinci: add CDCE949 support on DM6467 EVM davinci: add support for CDCE949 clock synthesizer davinci: da850/omap-l138 EVM: register for suspend support davinci: da850/omap-l138: add support for SoC suspend davinci: add power management support DaVinci: DM365: Changing default queue for DM365. ...
2010-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits) Input: atkbd - release previously reserved keycodes 248 - 254 Input: add KEY_WPS_BUTTON definition Input: ads7846 - add regulator support Input: winbond-cir - fix suspend/resume Input: gamecon - use pr_err() and friends Input: gamecon - constify some of the setup structures Input: gamecon - simplify pad type handling Input: gamecon - simplify coordinate calculation for PSX Input: gamecon - fix some formatting issues Input: gamecon - add rumble support for N64 pads Input: wacom - add device type to device name string Input: s3c24xx_ts - report touch only when stylus is down Input: s3c24xx_ts - re-enable IRQ on resume Input: wacom - constify product features data Input: wacom - use per-device instance of wacom_features Input: sh_keysc - enable building on SH-Mobile ARM Input: wacom - get features from driver info Input: rotary-encoder - set gpio direction for each requested gpio Input: sh_keysc - update the driver with mode 6 Input: sh_keysc - switch to using bitmaps ...
2010-03-01DaVinci DM365: Adding support for SPI EEPROMSandeep Paulraj
The DM365 Spectrum Digital EVM comes with an EEPROM connected to SPI0. This patch adds support for the SPI EEPROM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM365: Adding DM365 SPI supportSandeep Paulraj
This patch adds SPI init for DM365. It does the following 1) Initializes SPI0 2) Defines resources to be used by SPI0 3) Adds platform data for SPI0 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM355: Modifications to DM355 SPI supportSandeep Paulraj
This patch does the following 1) Minor change to the SPI clocks making it similar to DM365. 2) Changing the interrupt used by SPI0 3) Adding EDMA resources that can be used by SPI0 4) Adding platform specific data. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci: SPI: Adding header file for SPI support.Sandeep Paulraj
This patch adds "spi.h" header file that will be used by board and architecture specific code. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookupKevin Hilman
Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup' and use clk_lookup directly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (252 commits) ASoC: Check progress when reporting periods from i.MX FIQ handler ASoC: Remove a unused variables from i.MX FIQ runtime data ALSA: hda - Add/fix ALC269 FSC and Quanta models ALSA: hda - Add ALC670 codec support OMAP4: PMIC: Add support for twl6030 codec ALSA: hda - remove unnecessary msleep on power state transitions usb/gadget/{f_audio,gmidi}.c: follow recent changes in audio.h ASoC: fsi: Modify over/under run error settlement ASoC: OMAP4: Add McPDM platform driver ASoC: OMAP4: Add support for McPDM ASoC: OMAP: data_type and sync_mode configurable in audio dma ALSA: hda - Add missing description in HD-Audio-Models.txt ALSA: add support for Macbook Air 2,1 internal speaker ALSA: usbaudio: consolidate header files ALSA: usbmixer: bail out early when parsing audio class v2 descriptors ALSA: usbaudio: implement basic set of class v2.0 parser ALSA: usbaudio: introduce new types for audio class v2 ALSA: usbaudio: parse USB descriptors with structs ALSA: hda - enable snoop for Intel Cougar Point ALSA: hda - Remove identical definitions for macmini3 model ...
2010-03-01Merge branch 'topic/asoc' into for-linusTakashi Iwai
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26omap2: Initialize Menelaus and MMC for N8X0Tony Lindgren
Initialize MMC for N8X0 Based on an earlier patches from Nokia released kernel sources at: http://repository.maemo.org/pool/os2008/free/source/k/kernel-source-rx-34/ Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26pxa_camera: remove init() callbackAntonio Ospite
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: vpfe-capture: converting ccdc drivers to platform-driversMuralidharan Karicheri
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-25AM3517 EVM: correct typo - tca6416 mispelt as tca6516Sriram
Correct instances where tca6416 is misspelt as tca6516 in the board-am3517evm file. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM3517 EVM: Enable I2C supportSriram
There are multiple devices connected to I2C bus on AM3517EVM (for instance audio codec, IO expander etc). Enable I2C support in the default kernel configuration for AM3517 EVM. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM35x: Enable OMAP_MUX in defconfigAjay Kumar Gupta
Enabling OMAP_MUX in defconfig as it is required for EHCI to work. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM35x: Add missing GPIO mux config for EHCI portAjay Kumar Gupta
Adding GPIO mux config used for PHY reset of EHCI port on base board. We get below failure message without this patch, "hub 1-0:1.0: unable to enumerate USB device on port 1" Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Zoom3: Defconfig updatemanjugk manjugk
Some of the features are not enabled by default in zoom3 defconfig. This patch enables: - MMC Resume - TWL4030 RTC driver - Debug File system Build and boot tested on Zoom3 board. Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25omap: i2c: Fix muxing for command line enabled busJarkko Nikula
The commit b63128e81214cc2db2995d690438055c26d213a5 broke the pin muxing for I2C busses that are enabled from the kernel command line. Fix this by defining the board registration function omap_register_i2c_bus in common platform code as it was before but keep the muxing in architecture dependent files. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Merge branches 'clks' and 'pnx' into develRussell King
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-25Merge branch 'perf' into develRussell King
Conflicts: arch/arm/Kconfig
2010-02-25Merge branch 'tmpreg' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', ↵Russell King
'pending-dma-streaming', 'u300' and 'umc' into devel
2010-02-25ARM: Eliminate decompressor -Dstatic= PIC hackRussell King
We used to build decompressors with -Dstatic= to avoid any local data being generated. The problem is that local data generates GOTOFF relocations, which means we can't relocate the data relative to the text segment. Global data, on the other hand, goes through the GOT, and can be relocated anywhere. Unfortunately, with the new decompressors, this presents a problem since they declare static data within functions, and this leads to stack overflow. Fix this by separating out the decompressor code into a separate file, and removing 'static' from BSS data in misc.c. Also, discard the .data section - this means that should we end up with read/write initialized data, the decompressor will fail to link and the problem will be obvious. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-25OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen
Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-02-24OMAP4: clock: Remove clock hacks from timer-gp.cSantosh Shilimkar
Now the omap4 clock framework is in mainline and clk_get_rate() is functional. Hence reomve the hardcoded clock hacks. This patch also fixes Division by zero in kernel. Backtrace: [<c0025fb8>] (dump_backtrace+0x0/0x110) from [<c017febc>] (dump_stack+0x18/0x1c) r7:60000093 r6:c0641050 r5:c0223e78 r4:c02126b4 [<c017fea4>] (dump_stack+0x0/0x1c) from [<c00260fc>] (__div0+0x18/0x20) [<c00260e4>] (__div0+0x0/0x20) from [<c01431fc>] (Ldiv0+0x8/0x10) [<c00318d4>] (omap_dm_timer_stop+0x0/0xb0) from [<c002c148>] (omap2_gp_timer_set_mode+0x1c/0x68) r5:c0223e78 r4:00000000 [<c002c12c>] (omap2_gp_timer_set_mode+0x0/0x68) from [<c0063270>] (clockevents_set_mode+0x30/0x64) r5:c020cae0 r4:00000000 [<c0063240>] (clockevents_set_mode+0x0/0x64) from [<c00632fc>] (clockevents_exchange_device+0x30/0x9c) r5:c020cae0 r4:c02146e0 [<c00632cc>] (clockevents_exchange_device+0x0/0x9c) from [<c00636e0>] (tick_notify+0x17c/0x404) r7:00000000 r6:c0641050 r5:00000000 r4:c020cae0 [<c0063564>] (tick_notify+0x0/0x404) from [<c005d5fc>] (notifier_call_chain+0x34/0x78) [<c005d5c8>] (notifier_call_chain+0x0/0x78) from [<c005d684>] (__raw_notifier_call_chain+0x1c/0x24) [<c005d668>] (__raw_notifier_call_chain+0x0/0x24) from [<c005d6ac>] (raw_notifier_call_chain+0x20/0x28) [<c005d68c>] (raw_notifier_call_chain+0x0/0x28) from [<c0062e78>] (clockevents_do_notify+0x1c/0x24) [<c0062e5c>] (clockevents_do_notify+0x0/0x24) from [<c0062f18>] (clockevents_register_device+0x98/0xd0) [<c0062e80>] (clockevents_register_device+0x0/0xd0) from [<c001a194>] (percpu_timer_setup+0x80/0x9c) r7:00000000 r6:00000002 r5:00000002 r4:00000003 [<c001a114>] (percpu_timer_setup+0x0/0x9c) from [<c000e9f0>] (smp_prepare_cpus+0xb0/0xe8) [<c000e940>] (smp_prepare_cpus+0x0/0xe8) from [<c00084e8>] (kernel_init+0x5c/0x1fc) r7:00000000 r6:00000000 r5:00000000 r4:c001b8a4 [<c000848c>] (kernel_init+0x0/0x1fc) from [<c0046c50>] (do_exit+0x0/0x604) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP4: clock: Add dummy clock nodes for interface clocksSantosh Shilimkar
On OMAP4 platform the iclk control is completly under hardware control and no software control is available. This difference w.r.t previous OMAP's needs all the common driver accross OMAP's , cpu_is_xxxx() checks. To avoid poulluting the drivers dummy clock nodes are created (The autogeneration script has been updated accordingly). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made OMAP1 dummy_ck common and edited patch to reuse that] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fckRajendra Nayak
All leaf clock nodes are renamed for OMAP4 to have a clk name which end with a _ick or a _fck. This is done so that the naming convention is same as that followed on older OMAPs. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP2+ clock: revise omap2_clk_{disable,enable}()Paul Walmsley
Simplify the code in the omap2_clk_disable() and omap2_clk_enable() functions, reducing levels of indentation. This makes the code easier to read. Add some additional debugging pr_debug()s here also to help others understand what is going on. Revise the omap2_clk_disable() logic so that it now attempts to disable the clock's clockdomain before recursing up the clock tree. Simultaneously, ensure that omap2_clk_enable() is called on parent clocks first, before enabling the clockdomain. This ensures that a parent clock's clockdomain is enabled before the child clock's clockdomain. These sequences should be the inverse of each other. Revise the omap2_clk_enable() logic so that it now cleans up after itself upon encountering an error. Previously, an error enabling a parent clock could have resulted in inconsistent usecounts on the enclosing clockdomain. Remove the trivial _omap2_clk_disable() and _omap2_clk_enable() static functions, and replace it with the clkops calls that they were executing. For all this to work, the clockdomain omap2_clkdm_clk_enable() and omap2_clkdm_clk_disable() code must not return an error on clockdomains without CLKSTCTRL registers; so modify those functions to simply return 0 in that case. While here, add some basic kerneldoc documentation on both functions, and get rid of some old non-CodingStyle-compliant comments that have existed since the dawn of time (at least, the OMAP clock framework's time). Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-02-24OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change codePaul Walmsley
The OMAP2 and OMAP3 boot-time MPU rate change code is almost identical. Merge them into mach-omap2/clock.c, and add kerneldoc documentation. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP clockdomain: if no autodeps exist, don't try to add or remove themPaul Walmsley
_clkdm_add_autodeps() and _clkdm_del_autodeps() will attempt to dereference a NULL pointer if no autodeps were supplied to clkdm_init(). Based on a patch from Roel Kluin <roel.kluin@gmail.com> - thanks Roel. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Roel Kluin <roel.kluin@gmail.com>
2010-02-24OMAP hwmod: add hwmod class supportPaul Walmsley
Add support for categorizing and iterating over hardware IP blocks by the "class" of the IP block. The class is the type of the IP block: e.g., "timer", "timer1ms", etc. Move the OCP_SYSCONFIG/SYSSTATUS data from the struct omap_hwmod into the struct omap_hwmod_class, since it's expected to stay consistent for each class. While here, fix some comments. The hwmod_class structures in this patch were designed and proposed by Benoît Cousson <b-cousson@ti.com> and were refined in a discussion between Thara Gopinath <thara@ti.com>, Kevin Hilman <khilman@deeprootsystems.com>, and myself. This patch uses WARN() lines that are longer than 80 characters, as Kevin noted a broader lkml consensus to increase greppability by keeping the messages all on one line. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-24ARM: 5958/1: ARM: U300: fix inverted clk round rateLinus Walleij
The clk_round_rate() functions in the U300 clocking will always select the lowest clocking frequency due to inverted rounding comparisons. Fix this. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5956/1: misplaced parenthesesRoel Kluin
The parentheses appear misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5955/1: ep93xx: move timer defines into core.c and documentHartley Sweeten
The timer defines are only used in core.c. Move them so they will not be globaly exposed. While here, add additional defines to document the magic numbers used in the registers. Also, add some comments for clarification. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.cHartley Sweeten
The GPIO support in core.c handles the interrupt support for GPIO ports A, B, and F. The gpiolib implementation in gpio.c needs to access the function ep93xx_gpio_int_mask when a gpio pin is made an output and ep93xx_gpio_update_int_params in order to update the registers. Moving this support from core.c to gpio.c allows making the two functions static. It also keeps all the GPIO handling together in one file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5953/1: ep93xx: fix broken build of clock.cHartley Sweeten
Patch 5879/1: ep93xx: define magic numbers for pll1 and pll2 broke the ep93xx build due to one missing rename of EP93XX_SYSCON_CLOCK_SET2. The correct name should be EP93XX_SYSCON_CLKSET2. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH ↵Kukjin Kim
Kconfig Add ARM_L1_CACHE_SHIFT_6 to arch/arm/Kconfig to allow CPUs with L1 cache lines which are 64bytes to indicate this without having to alter the arch/arm/mm/Kconfig entry each time. Update the mm Kconfig so that ARM_L1_CACHE_SHIFT default value uses this and change OMAP3 and S5PC1XX to select ARM_L1_CACHE_SHIFT_6. Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24OMAP hwmod: convert header files with static allocations into C filesPaul Walmsley
Code should be able to #include any header file without the fear that the header file will go allocating memory. This is a coding style issue, similar to commit 82e9bd588563c4e22ebb55b684ebec7e310cc715. Move the existing hwmod data from .h files to .c files. While here, convert "omap34xx" to "omap3xxx" in the hwmod files, since most of these structures should be reusable across all OMAP3 chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-24OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+conPaul Walmsley
The OMAP hwmod core code is intended to use SoC IP block description structures that are autogenerated from TI's OMAP hardware database. Currently the hwmod code uses clkdev device + connection addressing to identify clocks. This causes problems in the hwmod autogeneration process, since the TI hardware database doesn't use platform_device or clkdev addressing; it uses a single clock signal name string, which tends to bear some resemblance to what is used in the OMAP TRMs. This patch converts the hwmod code and existing data to use omap_clk_get_by_name(), introduced in the previous patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-24OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core codePaul Walmsley
The OMAP hwmod core code is intended to use SoC IP block description structures that are autogenerated from TI's OMAP hardware database. Currently the hwmod code uses clkdev device + connection addressing to identify clocks. This causes problems in the hwmod autogeneration process, since the TI hardware database doesn't use platform_device or clkdev addressing; it uses a single clock signal name string, which tends to bear some resemblance to what is used in the OMAP TRMs. This patch adds a non-exported function to the OMAP clock code, omap_clk_get_by_name(). A subsequent patch will convert the hwmod code to use this function. This function is for use only by core code, and practically, no other code outside the hwmod code should need it. Device driver code in the kernel must not use this function, which is why it is not exported. Drivers should use the appropriate clock alias provided by the clkdev data structures, so driver code can be completely SoC-independent. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>