| Age | Commit message (Collapse) | Author |
|---|
|
Patch to register the SPI device and thus the save/resume for the display
This patch does *NOT* resolve this problem, but it does make things a bit
better. The SPI device name changed with 2.6.24, and the change was made for
the gta02 but never propagated to the gta01. With this change, you'll now see
the entries for the spi bus and the display controller in /sys; and the display
controller suspend/resume functions will be called.
(via BZ 79)
Signed-off-by: Mike Wester <mwester@dis.net>
|
|
- Any setting of any PIN on bank B will undo the LED setting.
Introduce neo1973_gpb_set_pin to set the PIN in a way not losing
the LED or any other shadowed setting.
- Update users of GPBXY for gta01 and gta02.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
The bluetooth enable and modem reset switched the order in
gta02. Do not poke the bluetooth dongle when we want to reset
the modem.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
If we build a kernel without gta01/gta02 the
machine_is_ macro will expand to (0) and the compiler will
optimize the if (0) {} away.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Only enable or disable the interrupt if we see we are in the opposing state.
Also force that damn GSM download signal deasserted on probe at the time we
set the logical state for it to deasserted.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Similar to the neo1974_pm_gsm.c keep a static struct around. On suspend
we will save the current power state, on resume we will use this
information to enable power of the GPS only when it was powered on before.
This is passing basic tests with screen /dev/ttySAC1 on suspend and resume.
Only do this for the GTA02 as I don't have a gllin setup for the GTA01
I wonder why the suspend and resume code is not using gps_pwron_set and why
for the GTA02 we need to keep the state of the GPIOs, this should be done
by the s3c code.
Signed-Off-by: Holger Frether <zecke@openmoko.org>
|
|
GTA02_GPIO_nDL_GSM defaults to high/1. On resume do not enable the DL_GSM if
it was not enabled before. This is stopping the storm of interrupts.
Fix the logic in the download file handling. Downloads are disabled (0) when
the GTA02_GPIO_nDL_GSM is high (1). To enable downloading set
GTA02_GPIO_nDL_GSM to low (0, !on). Disable the jack interrupt while download
the is active. When disabling download we will get a couple of jack interrupts
but this is hardly avoidable.
Avoid reading the GPIO value if we do not even have a console set.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add function
int gta02_get_pcb_revision(void)
which returns state of GTA02 PCB revision pins. It is also called
and logged during boot with KERN_INFO. The results look like:
b9 b8 b2 b1 b0
GPD4 GPD3 GPD0 GPC15 GPC13
GTA02 A5 and before: 0x000
GTA02 A6 : 0x001
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
We used to drive output high into GPS unit in suspend
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add platform stuff to deal with going in and out of suspend
so the motion sensor IO is not driving high into unpowered sensors
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Unless I really really missed the point, there is no support for enabling
USB Host power for USB host mode. This patch adds a /sys node for GTA02
that allows control of the charge pump for 5V out on the USB mini connector
It doesn't change any logical mode in the CPU, just enables (1) and disables
(0) USB host power.
# cat /sys/devices/platform/neo1973-pm-host.0/hostmode
0
# echo 1 > /sys/devices/platform/neo1973-pm-host.0/hostmode
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
|
|
|
|
Add support for GPA[] GPIO bus since we have some NCs
but they seem to output-only IO cells so no matter
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
These are initialized already
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
|
|
|
|
|
|
On GTA02 we use FIQ to manage the vibrator IO now. That
is necessary because we stole timer3 from doing hw pwm
for vibrator. This keeps the same UI in /sys but does
"bitbang pwm" on the same vibrator GPIO
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This makes the FIQ stuff specific to one of the timers on the
s3c244x and adds the platform stuff for fiq in the gta02 init
Currently one sysfs node is exposed, a count of FIQ events
cat /sys/devices/platform/sc32440_fiq.0/fiq/count
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Adds a C-based FIQ ISR which is very convenient (and unusual --
normally you have to do FIQ ISR in assembler only).
Based on my article:
http://warmcat.com/_wp/2007/09/17/at91rm9200-fiq-faq-and-simple-example-code-patch/
Implemented as a platform device and driver.
Suspend / resume is tested and works.
Signed-off-by: Andy Green <andy@warmcat.com>
|
|
|
|
Modify GTA02 power manager for bluetooth.
1. Default power value isn't correct. Now we set pcf50633 LDO4 to 3.2 voltage.
2. Separate GTA01 and GTA02 source code.
3. Add pcf50633 API for enable register.
|
|
|
|
This is a Linux driver for the STmicro LIS302DL 3-axis accelerometer.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
Add the Samsung S3C2442B CPU idcode to the samsung s3c24xx platform code
and fix a Kconfig typo related tot the 2442.
|
|
|
|
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally
developed years ago by Thomas Kleffel <tk@maintech.de>.
Due to time restraints, he had no time to further maintain the driver and
follow the mainline Linux changes in the SD/MMC stack.
With his authorization, I have taken over the task of making it compliant to
the current mainline SD/MMC API and take care of the mainline kernel merge.
After a potential kernel inclusion, we would co-maintain the driver.
Acked-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
|
|
|
|
This patch adds a PWM api abstraction for the S3C2410 SoC
Signed-off-by: Javi Roman <javiroman@kernel-labs.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
[PATCH] Neo1973 GPS / GSM / Bluetooth power control via sysfs
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This driver adds support for the SPI-based control interface of the LCM (LCD
Panel) found on the FIC GTA01 hardware.
The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
be able to drive any other diplay based on the JBT6K74-AS controller ASIC.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port
of the Linux kernel.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
[PATCH] Add Kconfig option to enable NAND bad-block-table support for s3c2410
This patch adds a new CONFIG_MTD_NAND_S3C2410_BBT which, if enabled,
asks the mtd NAND core to use a bad-block table.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
The initialization of clocks uses mutexes, but we execute the resume in
an interrupt context. We therefore have to hand this task to a non-interrupt.
Adapted from a patch by Andy Green.
|
|
Since 2.6.23 kbuild produces a 3GB arch/arm/boot/Image because it includes a
.note.gnu.build-id section at address 0 which is followed by 3GB of 0x00.
The --build-id option is set in the toplevel Makefile.
This patch explicitly puts the notes section after the TEXT section.
|
|
Add support for the LCD 48WVGA module attached to the
SMDK6410.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a standard helper to configure the LCD output pins for a 24BPP
display with VSYNC/HSYNC/VDEN.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a device definition for the new S3C framebuffer
driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Provide the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmk-next
|
