aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/kernel
AgeCommit message (Collapse)Author
2008-01-28all archs: consolidate init and exit sections in vmlinux.lds.hSam Ravnborg
This patch consolidate all definitions of .init.text, .init.data and .exit.text, .exit.data section definitions in the generic vmlinux.lds.h. This is a preparational patch - alone it does not buy us much good. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] extint: Set initial irq type to low level [AVR32] extint: change set_irq_type() handling [AVR32] NMI debugging [AVR32] constify function pointer tables [AVR32] ATNGW100: Update defconfig [AVR32] ATSTK1002: Update defconfig [AVR32] Kconfig: Choose daughterboard instead of CPU [AVR32] Add support for ATSTK1003 and ATSTK1004 [AVR32] Clean up external DAC setup code [AVR32] ATSTK1000: Move gpio-leds setup to setup.c [AVR32] Add support for AT32AP7001 and AT32AP7002 [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg [AVR32] Oprofile support [AVR32] Include instrumentation menu Disable VGA text console for AVR32 architecture [AVR32] Enable debugging only when needed ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME [AVR32] Remove redundant try_to_freeze() call from do_signal() [AVR32] Drop GFP_COMP for DMA memory allocations
2008-01-25[AVR32] NMI debuggingHaavard Skinnemoen
Change the NMI handler to use the die notifier chain to signal anyone who cares. Add a simple "nmi debugger" which hooks into this chain and that may dump registers, task state, etc. when it happens. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] constify function pointer tablesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Provide more CPU information in /proc/cpuinfo and dmesgHaavard Skinnemoen
Add the following fields to /proc/cpuinfo: * chip type and revision (from the JTAG chip id) * cpu MHz (from clk_get_rate()) * features (from the CONFIG0 register) Also rename "cpu family" to "cpu arch" and "cpu type" to "cpu core" to remove some ambiguity. Show chip type and revision at bootup, and clarify that the other kinds of IDs that we're already printing are for the cpu core and architecture. Rename "AP7000" to "AP7" since that's the name of the core. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Enable debugging only when neededHaavard Skinnemoen
Keep track of processes being debugged (including the kernel itself) and turn the OCD system on and off as appropriate. Since enabling debugging turns off some optimizations in the CPU core, this fixes the issue that enabling KProbes support or simply running a program under gdbserver will reduce system performance significantly until the next reboot. The CPU performance will still be reduced for all processes while a process is being debugged, but this is a lot better than reducing the performance forever. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Remove redundant try_to_freeze() call from do_signal()Haavard Skinnemoen
get_signal_to_deliver() will call try_to_freeze(), so there's no point in do_signal() doing it as well. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-24Driver core: change sysdev classes to use dynamic kobject namesKay Sievers
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-07[AVR32] Fix wrong pt_regs in critical exception handlerHaavard Skinnemoen
It's not like it really matters at this point since the system is dying anyway, but handle_critical pushes too few registers on the stack so the register dump, which makes the register dump look a bit strange. This patch fixes it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Follow the rules when dealing with the OCD systemHaavard Skinnemoen
The current debug trap handling code does a number of things that are illegal according to the AVR32 Architecture manual. Most importantly, it may try to schedule from Debug Mode, thus clearing the D bit, which can lead to "undefined behaviour". It seems like this works in most cases, but several people have observed somewhat unstable behaviour when debugging programs, including soft lockups. So there's definitely something which is not right with the existing code. The new code will never schedule from Debug mode, it will always exit Debug mode with a "retd" instruction, and if something not running in Debug mode needs to do something debug-related (like doing a single step), it will enter debug mode through a "breakpoint" instruction. The monitor code will then return directly to user space, bypassing its own saved registers if necessary (since we don't actually care about the trapped context, only the one that came before.) This adds three instructions to the common exception handling code, including one branch. It does not touch super-hot paths like the TLB miss handler. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Clean up OCD register usageHaavard Skinnemoen
Generate a new set of OCD register definitions in asm/ocd.h and rename __mfdr() and __mtdr() to ocd_read() and ocd_write() respectively. The bitfield definitions are a lot more complete now, and they are entirely based on bit numbers, not masks. This is because OCD registers are frequently accessed from assembly code, where bit numbers are a lot more useful (can be fed directly to sbr, bfins, etc.) Bitfields that consist of more than one bit have two definitions: _START, which indicates the number of the first bit, and _SIZE, which indicates the number of bits. These directly correspond to the parameters taken by the bfextu, bfexts and bfins instructions. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Implement irqflags trace and lockdep supportHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Implement stacktrace supportHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-07[AVR32] Fix invalid status register bit definitions in asm/ptrace.hHaavard Skinnemoen
The 'H' bit is bit 29, while the 'R' bit doesn't exist. Luckily, we don't actually use any of the bits in question. Also update show_regs() to show the Debug Mask and Debug state bits. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-19pid namespaces: define is_global_init() and is_container_init()Serge E. Hallyn
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16kprobes: support kretprobe blacklistMasami Hiramatsu
Introduce architecture dependent kretprobe blacklists to prohibit users from inserting return probes on the function in which kprobes can be inserted but kretprobes can not. This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and registers "__switch_to" to the blacklist on x86-64, because that mark is to prohibit user from inserting only kretprobe. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Consolidate PTRACE_DETACHAlexey Dobriyan
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11[AVR32] Fix random segfault with preemptionPhilippe Rétornaz
As explained on: http://www.avrfreaks.net/index.php?nameÿphpBB2&fileÿewtopic&tS307 If the current process is preempted before it can copy RAR_SUP and RSR_SUP both register are lost and the process will segfault as soon as it return from the syscall since the return adress will be corrupted. This patch disable IRQ as soon as we enter the syscall path and reenable them when the copy is done. In the interrupt handlers, check if we are interrupting the srrf instruction, if so disable interrupts and return. The interrupt handler will be re-called immediatly when the interrupts are reenabled. After some stressing workload: - find / > /dev/null in loop - top (in ssh) - ping -f avr32 The segfaults are not seen anymore. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-11[AVR32] Remove unneeded 8K alignment of .text sectionHaavard Skinnemoen
__init_end, which comes immediately before .text, is already page aligned, and that should be more than enough for the .text section. The reason why we need to align the .text section is because the interrupt handler offset is ORed with EVBA, so we need to provide enough alignment of EVBA that this OR operation works as an ADD. Currently, the last interrupt handler is not nearly a full page away from EVBA, so it won't be a problem. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-11[AVR32] Kill a few hardcoded constants in vmlinux.ldsHaavard Skinnemoen
Use PAGE_SIZE, THREAD_SIZE and L1_CACHE_BYTES instead of harcoded constants in places where that's what we really mean. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-11[AVR32] rename vmlinux.ldsSam Ravnborg
Rename vmlinux.lds to a .S file to match other architectures. Simplify Makefile to match the rename and deleted the unused USE_STANDARD_AS_RULE Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-11[AVR32] fix command line parsing in early_parse_fbmemMatteo Vit
Signed-off-by: Matteo Vit - Dave S.r.l. <matteo.vit@dave.eu> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-18[AVR32] Fix build error in parse_tag_rdimg()Haavard Skinnemoen
This code is inside an #ifdef with a misspelled config symbol, so it hasn't been used for a long time. Fix it before fixing the config symbol to keep bisection working. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-17PTRACE_POKEDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata() function. AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless return EPERM. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17PTRACE_PEEKDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata() function. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Report that kernel is tainted if there was an OOPSPavel Emelianov
If the kernel OOPSed or BUGed then it probably should be considered as tainted. Thus, all subsequent OOPSes and SysRq dumps will report the tainted kernel. This saves a lot of time explaining oddities in the calltraces. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Added parisc patch from Matthew Wilson -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16generic bug: use show_regs() instead of dump_stack()Heiko Carstens
The current generic bug implementation has a call to dump_stack() in case a WARN_ON(whatever) gets hit. Since report_bug(), which calls dump_stack(), gets called from an exception handler we can do better: just pass the pt_regs structure to report_bug() and pass it to show_regs() in case of a warning. This will give more debug informations like register contents, etc... In addition this avoids some pointless lines that dump_stack() emits, since it includes a stack backtrace of the exception handler which is of no interest in case of a warning. E.g. on s390 the following lines are currently always present in a stack backtrace if dump_stack() gets called from report_bug(): [<000000000001517a>] show_trace+0x92/0xe8) [<0000000000015270>] show_stack+0xa0/0xd0 [<00000000000152ce>] dump_stack+0x2e/0x3c [<0000000000195450>] report_bug+0x98/0xf8 [<0000000000016cc8>] illegal_op+0x1fc/0x21c [<00000000000227d6>] sysc_return+0x0/0x10 Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andi Kleen <ak@suse.de> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-19all-archs: consolidate .data section definition in asm-genericSam Ravnborg
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19all-archs: consolidate .text section definition in asm-genericSam Ravnborg
Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-13[AVR32] Wire up signalfd, timerfd and eventfdHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-13[AVR32] optimize pagefault pathChristoph Hellwig
Avoid the costly notifier list in the pagefault path and call the kprobes code directly. The same change went into the 2.6.22 cycle for powerpc, 2s390 and sparc64 already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-13[AVR32] Remove bogus comment in arch/avr32/kernel/irq.cHaavard Skinnemoen
The comment at the top of arch/avr32/kernel/irq.c doesn't really make sense anymore since most of the actual interrupt handling code is elsewhere. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-09Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Wire up sys_utimensat [AVR32] Fix section mismatch .taglist -> .init.text [AVR32] Implement dma_{alloc,free}_writecombine() AVR32: Spinlock initializer cleanup [AVR32] Use correct config symbol when setting cpuflags
2007-05-09wrap access to thread_infoRoman Zippel
Recently a few direct accesses to the thread_info in the task structure snuck back, so this wraps them with the appropriate wrapper. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09[AVR32] Wire up sys_utimensatHaavard Skinnemoen
Tested with a slightly hacked version of the test case included with the original utimensat patch. All OK. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-09[AVR32] Fix section mismatch .taglist -> .init.textHaavard Skinnemoen
Rename .taglist to .taglist.init to silence section mismatch warnings. The .taglist.init section was already placed in the .init output section along with .init.text, so the warning didn't indicate any real problems. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-09AVR32: Spinlock initializer cleanupThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08move die notifier handling to common codeChristoph Hellwig
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-27[AVR32] Optimize the TLB miss handlerHaavard Skinnemoen
Reorder some instructions and change the register usage to reduce the number of pipeline stalls. Also use the bfextu and bfins instructions for bitfield manipulations instead of shifting and masking. This makes gzipping a 80MB file approximately 2% faster. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Get rid of board_setup_fbmem()Haavard Skinnemoen
Since the core setup code takes care of both allocation and reservation of framebuffer memory, there's no need for this board- specific hook anymore. Replace it with two global variables, fbmem_start and fbmem_size, which can be used directly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Reserve framebuffer memory in early_parse_fbmem()Haavard Skinnemoen
With the current strategy of using the bootmem allocator to allocate or reserve framebuffer memory, there's a slight chance that the requested area has been taken by the boot allocator bitmap before we get around to reserving it. By inserting the framebuffer region as a reserved region as early as possible, we improve our chances for success and we make the region visible as a reserved region in dmesg and /proc/iomem without any extra work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Simplify early handling of memory regionsHaavard Skinnemoen
Use struct resource to specify both physical memory regions and reserved regions and push everything into the same framework, including kernel code/data and initrd memory. This allows us to get rid of many special cases in the bootmem initialization and will also make it easier to implement more robust handling of framebuffer memory later. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Move setup_bootmem() from mm/init.c to kernel/setup.cHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Fix NMI handlerHaavard Skinnemoen
Fix a problem with the NMI handler entry code related to the NMI handler sharing some code with the exception handlers. This is not a good idea because the RSR and RAR registers are not the same, and the NMI handler runs with interrupts masked the whole time so there's no need to check for pending work. Open-code the low-level NMI handling logic instead so that the pt_regs layout is actually correct when the higher-level handler is called. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Clean up exception handling codeHaavard Skinnemoen
* Use generic BUG() handling * Remove some useless debug statements * Use a common function _exception() to send signals or oops when an exception can't be handled. This makes sure init doesn't enter an infinite exception loop as well. Borrowed from powerpc. * Add some basic exception tracing support to the page fault code. * Rework dump_stack(), show_regs() and friends and move everything into process.c * Print information about configuration options and chip type when oopsing Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Clean up cpu identification and add features bitmapHaavard Skinnemoen
Clean up the cpu identification code, using definitions from <asm/sysreg.h> instead of hardcoded constants. Also, add a features bitmap to struct avr32_cpuinfo to allow other code to make decisions based upon what the running cpu is actually capable of. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Put cpu in sleep 0 when idle.Hans-Christian Egtvedt
This patch puts the CPU in sleep 0 when doing nothing, idle. This will turn of the CPU clock and thus save power. The CPU is waken again when an interrupt occurs. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Change system timer from count-compare to Timer/Counter 0Hans-Christian Egtvedt
Due to limitation of the count-compare system timer (not able to count when CPU is in sleep), the system timer had to be changed to use a peripheral timer/counter. The old COUNT-COMPARE code is still present in time.c as weak functions. The new timer is added to the architecture directory. This patch sets up TC0 as system timer The new timer has been tested on AT32AP7000/ATSTK1000 at 100 Hz, 250 Hz, 300 Hz and 1000 Hz. For more details about the timer/counter see the datasheet for AT32AP700x available at http://www.atmel.com/dyn/products/product_card.asp?part_id=3903 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>