aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/kernel/setup.c
AgeCommit message (Collapse)Author
2009-12-15Blackfin: drop 4KB reserve at end of memoryBarry Song
The point of this small chunk was to avoid anomaly 05000310. This never really seemed to do what it was intended though -- no valid CPLBs exist over the reserved memory, and there is often memory before it anyways (due to the uClinux MTD and/or reserved DMA region). Plus, it doesn't address the L1 instruction case. So drop this chunk as it wastes memory and is affront to humanity. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: announce current cpu rev when bootingRobin Getz
User reports rarely include full information, so include this important tidbit up front. It's also good to know at a glance in general. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: calculate on-chip lengths at link time rather than run timeMike Frysinger
Since the link sizes never change at runtime, push the calculation out to the linker script to save some useless calculation costs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix spelling in a few commentsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: punt dead cache locking codeMike Frysinger
No one uses these functions, and some are duplicate of existing C code. So just punt the whole thing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: catch hardware errors earlier during bootingRobin Getz
Allow hardware errors to be caught during early portions of booting, and leave something in the shadow console that people can use to debug their system with (to be printed out by the bootloader on next reset). This enables the hardare error interrupts in head.S, allowing us to find hardware errors when they happen (well, as much as you can with a hardware error) and prints out the trace if it is enabled. This will catch errors (like booting the wrong image on a 533) which previously resulted in a infinite loop/hang, as well as random hardware errors before before setup_arch(). To disable this debug only feature - turn off EARLY_PRINTK. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: add an early shadow consoleRobin Getz
Add a memory based shadow console to keep a copy of the printk buffer in a location which can be found externally. This allows bootloaders to locate and utilize the log buffer in case of silent (early/resume/etc...) crashes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: clean up early memory setup codeRobin Getz
Remove code duplication, and only print out memory warnings when they are an actual problem. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: drop per-cpu loops_per_jiffy trackingMichael Hennerich
On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores always run at the same CCLK. In addition, the current implementation has flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the global kernel loops_per_jiffy and not the per_cpu one. So punt all of the per-cpu handling and go back to the global shared one. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: drop duplicate runtime checking of anomaly 05000448Robin Getz
We already catch this anomaly at compile time, and the runtime version is such that it ends up checking on all parts rather than just the ones that might actually have it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix silent crash when no uClinux MTD filesystem existsRobin Getz
Since we need to relocate the attached filesystem with the uClinux MTD map (to handle some anomalies), we need to know its real filesize. If we boot a kernel without a filesystem actually attached, we end up blindly reading and copying garbage (since there is no magic value to detect validity). Often times this results in an early crash and no output. So add a few basic sanity checks before operating on things to catch the majority of cases. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: drop dead flash_probe callMike Frysinger
There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no flash_probe() function, so not really sure what this code is all about. Seems to be dead code that stretches way back to the start of the Blackfin port. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Blackfin: fix early crash when booting on wrong cpuRobin Getz
Make sure we process the kernel command line before poking the hardware, so that we can process early printk. This helps ensure that if you boot a kernel configured for a different processor, something will be left in the log buffer. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: decouple unrelated cache settings to get exact behaviorJie Zhang
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix accidental reset in some boot modesSonic Zhang
We read the SWRST (Software Reset) register to get at the last reset state, and then we may configure the DOUBLE_FAULT bit to control behavior when a double fault occurs. But if the lower bits of the register is already set (like UART boot mode on a BF54x), we inadvertently make the system reset by writing to the SYSTEM_RESET field at the same time. So make sure the lower 4 bits are always cleared. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add blackfin_invalidate_entire_icache for SMP systemsSonic Zhang
The KGDB code uses this when switching processors to make sure the icache is in a valid state. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: include the cpu compiled version in /proc/cpuinfoRobin Getz
Since the compiled-for cpu revision can be significant, include it in the cpuinfo output along side the cpu revision we're currently running on. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: override default uClinux MTD addr/sizeMike Frysinger
Due to a processor anomaly (05000263 to be exact), most Blackfin parts cannot keep the embedded filesystem image directly after the kernel in RAM. Instead, the filesystem needs to be relocated to the end of memory. As such, we need to tweak the map addr/size during boot for Blackfin systems. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: detect anomaly 05000274Sonic Zhang
Detect and reject operating conditions for anomaly 05000274 since the problem cannot be worked around in software. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: do not append newlines to panic() messagesMike Frysinger
The panic() function already handles newlines for us. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix early L1 relocation crashRobin Getz
Our early L1 relocate code may implicitly call code which lives in L1 memory. This is due to the dma_memcpy() rewrite that made the DMA code lockless and safe to be used by multiple processes. If we start the early DMA memcpy to relocate things into L1 instruction but then our DMA memcpy code calls a function that lives in L1, things fall apart. As such, create a small dedicated DMA memcpy routine that we can assume sanity at boot time. Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-05Blackfin arch: remove spurious dash when dcache is offMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: Random read/write errors are a bad thingRobin Getz
Random read/write errors are a bad thing - so don't let anyone (including the test bench) run on something we know is bad. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Update Copyright informationMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: define bfin_memmap as static since it is only used hereMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in itMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Print out where the bootmode is coming from (for easier ↵Robin Getz
debugging). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rewrite get_sclk()/get_vco()Mike Frysinger
rewrite get_sclk()/get_vco() based on the assumption sclk/vco never changes (since today it cannot) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: panic when running on a chip rev below what we are compiled forRobin Getz
If we are running on a chip revision below what we are compiled for, there will be missing anomaly workarounds, and a panic is inevitable. Do is sooner, rather than later, so people don't look for bugs that already have workarounds (that they turned off). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: do not allow people to pass in a diff clkin_hz valueMike Frysinger
do not allow people to pass in a diff clkin_hz value when reprogramming clocks -- it is too late currently Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: allow clkin_hz to be specified on the command lineMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: show_cpuinfo - consolidate ugly castsMike Frysinger
rather than use *(unsigned int *)v everywhere, do this once with a local cpu_num variable Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: include linux/mm.h since we use PAGE_ALIGN and suchMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rewrite dma_memcpy() and dma in/out functionsMike Frysinger
- unify all dma in/out functions (takes ~35 lines of code now) - unify dma_memcpy with dma in/out functions (1 place that touches MDMA0 registers) - add support for 32bit transfers - cleanup dma_memcpy code to be much more readable - irqs are disabled only while programming MDMA registers rather than the entire transaction Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: delete now unused "cclk" member of blackfin_cpudataMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Fix bug - change cpufreq doesn't take effect on bf537 nowMichael Hennerich
CCLK is variable: get current CCLK in show_cpuinfo Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: SMP supporting patchset: Blackfin kernel and memory ↵Graf Yang
management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: dont warn when running a kernel on the oldest supported siliconMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27Blackfin arch: don't copy bss when copying L1Mike Frysinger
when copying L1 regions, go to the start of bss rather than end since we have code to zero it out already Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13Blackfin arch: introducing bfin_addr_dcachableVitja Makarov
This patch introduces bfin_addr_dcachable() predicate, that simply tests is address in cachable region or not. Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-10Blackfin arch: fix a typo in commentsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-10Blackfin arch: print out error/warning if you are running on the incorrect ↵Robin Getz
CPU type Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: Move all the silicon rev handling to one placeMike Frysinger
Move all the silicon rev handling to one place (Kconfig) and make sure we warn if you are running on silicon that has not been tested on Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: correct icache size in show_cpuinfo(), let c_start() return ↵Graf Yang
proper pointer Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Modify some funtion names to more genernal onesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add supporting for double fault debug handlingRobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: use %pF when printing out the double fault address so we get ↵Mike Frysinger
symbol names Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 10:07:03 +0000