aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf538
AgeCommit message (Collapse)Author
2010-03-09Blackfin: increase NR_IRQS beyond NR on-chip IRQsMichael Hennerich
This makes room for off-chip IRQ controllers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: update AD7879 resources to match the new gpiolib driver supportMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: extend bfin-lq035q1-fb resources to include PPI modeMichael Hennerich
This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add UART/SPORT early platform resourcesSonic Zhang
This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move SPORT UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move on-chip UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: bf537-stamp: add CAN resourcesBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify DMA masksMike Frysinger
Every Blackfin variant has the same DMA bit masks, so avoid duplicating them over and over in each mach header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify duplicated power masksMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: punt unused MXVR masksMike Frysinger
There are no MXVR device drivers, and if someday there is, we can put these in a dedicated header rather than polluting the global namespace. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused watchdog mmr masksMike Frysinger
The watchdog code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused RTC masksMike Frysinger
The RTC driver code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: bf538: add support for extended GPIO banksMichael Hennerich
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as the other ports on the part and the same way as all other Blackfin parts. The MMRs are programmed slightly different and they cannot be used to generate interrupts or wakeup a sleeping system. Since these guys don't fit into the existing code, create a simple gpiolib driver for them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25Blackfin: update anomaly listsMike Frysinger
Add some recently documented anomalies (473, 474, 475, 477). Also stick a "do not edit" notice in here so people know these are copies of some master version. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop all simple-gpio board resourcesMike Frysinger
The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop cs_change_per_word settingMike Frysinger
Structs get initialized to 0 already, and we want to punt this field, so scrub it from all of our boards. Reported-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-21trivial: fix typo "for for" in multiple filesAnand Gadiyar
trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-16Blackfin: bf538-ezkit: add SPI IRQ resourcesBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update anomaly listsYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf538-ezkit: add resources for parallel flashBarry Song
The board has some parallel flash hooked up to the async banks, so add appropriate physmap resources for it. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop unused MMR defines that only cause bad code to be writtenMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert boards to use platform data with smc91xMichael Hennerich
Latest smc91x driver allows you to specify settings in board resources rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf538: add bfin_clear_PPI_STATUS() helperBarry Song
Add the bf538 version of bfin_clear_PPI_STATUS() to match all other ports. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix wrong CTS inversionSonic Zhang
The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: update anomaly lists to match latest sheets/usageGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: unify memory map headersMike Frysinger
Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: update anomaly listsMike Frysinger
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add MDMA defines to make cross-variant coding easierGraf Yang
Add some defines to make the BF538/BF561 look like most other Blackfin parts in that it has a MDMA0 channel available for low level init. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: pull updated anomaly lists from toolchainMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12Blackfin: fix parentheses balance and convert some tab/space mixingMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-06Blackfin arch: add stubs for anomalies 447 and 448Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04Blackfin arch: update anomaly sheets to match latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix bug - Error if one serial has hardware flow control and ↵Tom Parker
the other doesn't I have a system where UART0 is configured with hardware flow control, but UART1 doesn't have it enabled. Attempting to access UART1 in this configuration results in the following error in dmesg: <3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart ! <5>Stack from 0082bc7c: <5> 0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4 00000000 <5> 00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249 00003035 <5> 00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748 0000ffff <5> 22222222 22222222 004e1628 00427304 00000000 00000032 00000023 0054b748 <5> 00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748 00000001 <5> 0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134 0054b748 <5> <5>Call Trace: <4>[<00485c16>] _uart_startup+0x56/0x178 <4>[<004865c8>] _uart_open+0x40/0x3e0 <4>[<0048661c>] _uart_open+0x94/0x3e0 <4>[<0047f1ce>] _init_dev+0x1fa/0x450 <4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8 <4>[<004815da>] _tty_open+0xf6/0x21c <4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c <4>[<004375e4>] _chrdev_open+0x7c/0x134 <4>[<0043dc2c>] _open_namei+0x60/0x568 <4>[<00433fa2>] ___dentry_open+0x9e/0x188 <4>[<00437568>] _chrdev_open+0x0/0x134 <4>[<0043410c>] _nameidata_to_filp+0x30/0x3c <4>[<00434152>] _do_filp_open+0x3a/0x44 <4>[<00408826>] _task_running_tick+0x102/0x278 <4>[<0043418e>] _do_sys_open+0x32/0xac <4>[<0043ede4>] _sys_ioctl+0x28/0x50 <4>[<0043edbc>] _sys_ioctl+0x0/0x50 <4>[<00434224>] _sys_open+0x18/0x20 <4>[<0043420c>] _sys_open+0x0/0x20 <4>[<00418174>] _sys_setuid+0x0/0xc8 This is because the #ifdef's in bfin_serial_5xx.h are messed up. More specifically, they add/remove the uart_{rts,cts}_pin fields in bfin_serial_resources based on whether the particular port has rts/cts enabled, as opposed to when either port has it enabled. This patch fixed this. Signed-off-by: Tom Parker <blackfin@tevp.net> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix compile failure when missing the anomaly definitionMike Frysinger
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: update anomaly headers to match latest sheetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Remove wasted SIR header filesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add bfin_read_MDMA_S0_CONFIG compat for dma_memcpyMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: cleanup - use scm for changelog, not file headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match ↵Mike Frysinger
everyone else Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: smp patch cleanup from LKML reviewGraf Yang
1. Use inline get_l1_... functions instead of macro 2. Fix compile issue about smp barrier functions Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: gpio.h split into machine subfolders like already done for BF54xMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK optionMichael Hennerich
- remove duplicated code and headers - add option allowing arbitrary SDRAM/DDR Timing parameters. - mark automatically calculated timings as EXPERIMENTAL - fix comment header block Related to BUGs: - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on. - kernel does not boot if re-program clocks [ Mike Frysinger <vapier.adi@gmail.com> - fix comment header - mark do_sync static - document the DMA shutdown - simplify SIC_IWR handling - fix ANOMALY_05000265 handling to work as intended ] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add simple-gpio resources to all adi/tinyboardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 09:14:43 +0000