aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin
AgeCommit message (Collapse)Author
2007-10-16Consolidate PTRACE_DETACHAlexey Dobriyan
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Input: add support for Blackfin BF54x Keypad controllerMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: fix race in autosuspend reschedule atmel_usba_udc: Keep track of the device status USB: Nikon D40X unusual_devs entry USB: serial core should respect driver requirements USB: documentation for USB power management USB: skip autosuspended devices during system resume USB: mutual exclusion for EHCI init and port resets USB: allow usbstorage to have LUNS greater than 2Tb USB: Adding support for SHARP WS011SH to ipaq.c USB: add atmel_usba_udc driver USB: ohci SSB bus glue USB: ehci build fixes on au1xxx, ppc-soc USB: add runtime frame_no quirk for big-endian OHCI USB: funsoft: Fix termios USB: visor: termios bits USB: unusual_devs entry for Nikon DSC D2Xs USB: re-remove <linux/usb_sl811.h> USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h> USB: Export URB statistics for powertop USB: serial gadget: Disable endpoints on unload ...
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
2007-10-12USB: re-remove <linux/usb_sl811.h>David Brownell
Remove <linux/usb_sl811.h> ... somehow this was recreated when the Blackfin arch was merged, instead of using <linux/usb/sl811.h> which is the correct header. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-04[CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger
into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle ↵Michael Hennerich
Pokki <kalle.pokki@iki.fi> Cc: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-04Blackfin arch: gpio pinmux and resource allocation API required by BF537 on ↵Michael Hennerich
chip ethernet mac driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-23Blackfin arch: add some missing syscallBryan Wu
When compiling the Blackfin kernel, checksyscalls.pl will report lots of missing syscalls warnings. This patch will add some missing syscalls which make sense on Blackfin arch After appling this patch, toolchain should be rebuilt. Then recompiling the kernel with the new toolchain. Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: Update/Fix PM support add new pm_ops validMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-11Blackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin archBryan Wu
Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and ↵Robin Getz
DEBUG_KERNEL_START Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well, and DEBUG_KERNEL_START was just implmented poorly. Will replace with a new checkin. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: fix typo in register nameMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { ↵Bernd Schmidt
NULL, 0 } fails on Blackfin Fix a problem reported in the forums - libstdc++ can call writev with an iovec containing { NULL, 0 }, which works fine on i686-linux, but fails on Blackfin. Fixed by allowing size 0 transfers to/from userspace regardless of the address. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: Export strcpy - occasionally get module link failures otherwiseBernd Schmidt
Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: the load address is not safe to point to as a workaround for ↵Robin Getz
ANOMALY 05000281 Now that we have moved head.S into the init section, the load address is not safe to point to as a workaround for ANOMALY 05000281 Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: show_mem can not be marked as init, since it is called during ↵Robin Getz
OOM condition show_mem can not be marked as init, since it is called during OOM condition from /mm/oom_kill.c:out_of_memory() and /mm/page_alloc.c:__alloc_pages() Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: flush/inv the correct range when using write back cache and ↵Michael Hennerich
fix bugs find by dmacopy - flush/inv the correct range - dmacopy test failed when policy is write_back - invalidate before dma http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3367 It's the cache invalidate what is causing the issue. There is no invalidate only instruction it's always: FLUSHINV So when we "invalidate" after the DMA we might (do) overwrite freshly dma'ed data by dirty Cache WB content. Fixed by moving the "invalidate" at the beginning of dma_memcpy. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 ↵Michael Hennerich
and BF561 05000323 Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 accoring to BF533 anomaly sheet Rev. A 09/04/07 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Print out debug info, as early as possibleRobin Getz
Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt ↵Robin Getz
tables are set up will print out Also ensure that the traps_c code doesn't cause a double fault, by sending a signal to a faulting kernel before the memory subsystem is fully initialized, by printing out the error message before sending the signal. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: fix endless loop bug when a double fault happensRobin Getz
Today when a double fault happens (exception during an exception handling event), we go into an endless loop, with nothing comming out the UART. With this patch, we actually see that we have commited a double fault event Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Initial patch to add earlyprintk supportRobin Getz
This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible ↵Bryan Wu
with other archs Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: add more common defines for output sectionsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12Blackfin arch: cleanup IO and DMA_IO API function definitions according to ↵Bryan Wu
other arches Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12Blackfin arch: fix typo pointed out by David Rowe (Mhz -> MHz)Mike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: Workaround reboot bug, issue SSYNC at the start of bfin_resetMichael Hennerich
reboot failes on BF533 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3500 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-28Blackfin arch: Remove legacy supportMichael Hennerich
Now that there is a generic GPIO driver framework remove GPIO register unified name space legacy support. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: a few things still use bfin_read_PORT_FER()Michael Hennerich
- Update gpio_request to allow multiple request with the same signature (label) - Use generic GPIO API where applicable - Update generic board support form stamp board Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work ↵Robin Getz
that well with DEBUG_KERNEL_START Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-28Blackfin arch: Merge GPIO/Peripheral Resource Allocation back into a single fileMichael Hennerich
Signed-off-by: Michael Hennerich <michale.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: extract gpio number from PIN functionMichael Hennerich
Singed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: rewrite our reboot code in CMike Frysinger
rewrite our reboot code in C rather than assembly to be like other architectures and to allow board maintainers to define custom behavior Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: vmlinux.lds.S, break up our .init into separate sectionsMike Frysinger
Break up our .init into separate section like all other ports do and so that we dont mix text and data (causes disassembly headaches as pointed out by Robin) Cc: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: Board defconfig updatingBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: parse input sections properly when using ↵Mike Frysinger
-ffunction-sections/-fdata-sections Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: add an exception request/free apiMike Frysinger
add an exception request/free api similar to the interrupt request/fre api so people can utilize the free software based exceptions for their own purposes Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: allow people to select the feature that is unavailable to the ↵Mike Frysinger
kernel - allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: Allow ptrace access the fixed code.Jie Zhang
Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: Add DMA API to set curr descriptor addressSonic Zhang
This API is necessary for DMA descriptor array mode. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: update BOOT_LOADMike Frysinger
update BOOT_LOAD help to reflect current state of the first 4k of our address space as well as add a memory range option to prevent invalid values Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: remove spurious KERN_EMERG log level in outputMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: to do some consolidation of common code and common name spacesRobin Getz
now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: remove unused code -- EVT0 is not controllable by softwareMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Add option to priorize DMA over CoreMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: Add support for the M25P16 SPI FLashMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: add set_dma_curr_addr DMA API to support sound driver ↵Roy Huang
recording function Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: Add ability to expend the hardware trace bufferRobin Getz
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Fix CCLK and SCLK checksRobin Getz
Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-09 08:49:21 +0000