aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/pci
AgeCommit message (Collapse)Author
2006-10-03Attack of "the the"s in archMatt LaPlante
The patch below corrects multiple occurances of "the the" typos across several files, both in source comments and KConfig files. There is no actual code changed, only text. Note this only affects the /arch directory, and I believe I could find many more elsewhere. :) Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-01[PATCH] arch/i386/pci/mmconfig.c tweaksAndrew Morton
- Add soothing comment - uninline thrice-called function Cc: OGAWA Hirofumi <hogawa@miraclelinux.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing ↵Andi Kleen
conf1 Some buggy systems can machine check when config space accesses happen for some non existent devices. i386/x86-64 do some early device scans that might trigger this. Allow pci=noearly to disable this. Also when type 1 is disabling also don't do any early accesses which are always type1. This moves the pci= configuration parsing to be a early parameter. I don't think this can break anything because it only changes a single global that is only used by PCI. Cc: gregkh@suse.de Cc: Trammell Hudson <hudson@osresearch.net> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: Move direct PCI scanning functions out of lineAndi Kleen
Saves about 200 bytes of code space. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: Add MMCFG resources to i386 tooAndi Kleen
Following earlier x86-64 patch Cc: gregkh@suse.de Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: Only do MCFG e820 check when type 1 worksAndi Kleen
Needs earlier patch to split type 1 probing from use. This patch should fix the x86 macs where type 1 PCI config space access doesn't work, but MCFG does. They also don't have a usable e820 table so the e820 sanity check failed. Instead assume now that if type 1 doesn't work then MCFG must work and don't do the e820 check. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: PCI: split probing and initialization of type 1 config ↵Andi Kleen
space access First probe if type1/2 accesses work, but then only initialize them at the end. This is useful for a later patch that needs this information inbetween. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-19Revert mmiocfg heuristics and blacklist changesLinus Torvalds
This reverts commits 11012d419cfc0e0f78ca356aca03674217910124 and 40dd2d20f220eda1cd0da8ea3f0f9db8971ba237, which allowed us to use the MMIO accesses for PCI config cycles even without the area being marked reserved in the e820 memory tables. Those changes were needed for EFI-environment Intel macs, but broke some newer Intel 965 boards, so for now it's better to revert to our old 2.6.17 behaviour and at least avoid introducing any new breakage. Andi Kleen has a set of patches that work with both EFI and the broken Intel 965 boards, which will be applied once they get wider testing. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86: Disable MMCONFIG on Intel SDV using DMI blacklistAndi Kleen
As a replacement for the earlier removal of the e820 MCFG check we blacklist the Intel SDV with the original BIOS bug that motivated that check. On those machines don't use MMCONFIG. This also adds a new pci=mmconf parameter to override the blacklist. Cc: Greg KH <gregkh@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] x86: Revert e820 MCFG heuristicsAndi Kleen
The check for the MCFG table being reserved in the e820 map was originally added to detect a broken BIOS in a preproduction Intel SDV. However it also breaks the Apple x86 Macs, which can't supply this properly, but need a working MCFG. With this patch they wouldn't use the MCFG and not work. After some discussion I think it's best to remove the heuristic again. It also failed on some other boxes (although it didn't cause much problems there because old style port access for PCI config space still works as fallback), but the preproduction SDVs can just use pci=nommcfg. Supporting production machines properly is more important. Edgar Hucek did all the debugging work. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-26[PATCH] PCI: i386 mmconfig: don't forget bus number when setting ↵Daniel Ritz
fallback_slots bits On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26[PATCH] PCI: use PCBIOS as last fallbackDaniel Ritz
there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()Adrian Bunk
This patch adds a proper prototype for pcibios_sort() in arch/i386/pci/pci.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02[PATCH] irq-flags: i386: Use the new IRQF_ constantsThomas Gleixner
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] arch: use list_move()Akinobu Mita
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under arch/. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] mm: remove VM_LOCKED before remap_pfn_range and drop VM_SHMChristoph Lameter
Remove VM_LOCKED before remap_pfn range from device drivers and get rid of VM_SHM. remap_pfn_range() already sets VM_IO. There is no need to set VM_SHM since it does nothing. VM_LOCKED is of no use since the remap_pfn_range does not place pages on the LRU. The pages are therefore never subject to swap anyways. Remove all the vm_flags settings before calling remap_pfn_range. After removing all the vm_flag settings no use of VM_SHM is left. Drop it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: constify arch/i386/pci/irq.cAndreas Mohr
constify structs and add one __initdata. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: call eisa_set_level_irq() in pbibios_lookup_irq()Linus Torvalds
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[PATCH] PCI: fix issues with extended conf space when MMCONFIG disabled ↵Chuck Ebbert
because of e820 On 15 Jun 2006 03:45:10 +0200, Andi Kleen wrote: > Anyways I would say that if the BIOS can't get MCFG right then > it's likely not been validated on that board and shouldn't be used. According to Petr Vandrovec: ... "What is important (and checked) is address of MMCONFIG reported by MCFG table... Unfortunately code does not bother with printing that address :-( "Another problem is that code has hardcoded that MMCONFIG area is 256MB large. Unfortunately for the code PCI specification allows any power of two between 2MB and 256MB if vendor knows that such amount of busses (from 2 to 128) will be sufficient for system. With notebook it is quite possible that not full 8 bits are implemented for MMCONFIG bus number." So here is a patch. Unfortunately my system still fails the test because it doesn't reserve any part of the MMCONFIG area, but this may fix others. Booted on x86_64, only compiled on i386. x86_64 still remaps the max area (256MB) even though only 2MB is checked... but 2.6.16 had no check at all so it is still better. PCI: reduce size of x86 MMCONFIG reserved area check 1. Print the address of the MMCONFIG area when the test for that area being reserved fails. 2. Only check if the first 2MB is reserved, as that is the minimum. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: i386/x86_84: disable PCI resource decode on device disableRajesh Shah
When a PCI device is disabled via pci_disable_device(), it's still left decoding its BAR resource ranges even though its driver will have likely released those regions (and may even have unloaded). pci_enable_device() already explicitly enables BAR resource decode for the device being enabled. This patch disables resource decode for the PCI device being disabled, making it symmetric with the enable call. I saw this while doing something else, not because of a problem report. Still, seems to be the correct thing to do. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] PCI: fix via irq SATA patchGreg Kroah-Hartman
This device id improperly got added to the VIA chipset list with a previous patch. Remove it as it is not correct. Cc: Grzegorz Janoszka <Grzegorz@Janoszka.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] arch/i386/pci/irq.c - new VIA chipsets (fwd)Grzegorz Janoszka
I use 2.6.15.6 Linux kernel and found some problems. I have about 100 Linux boxes (all with the same (binary the same) kernel). Last time I have upgraded all those boxes from 2.4.32 to 2.6.15.6 (first 2.6.15.1, next .2, .4 and .6) and I have found some problems on VIA based PC's. Probably the reason of this is that some VIA chipsets are unrecognized by IRQ router. In line 586 there is: /* FIXME: add new ones for 8233/5 */ There were only a few of chipsets ID's there, some of my VIA chipsets were not present and kernel used default IRQ router. I have added three entries, so that the code looks like: case PCI_DEVICE_ID_VIA_82C596: case PCI_DEVICE_ID_VIA_82C686: case PCI_DEVICE_ID_VIA_8231: case PCI_DEVICE_ID_VIA_8233A: case PCI_DEVICE_ID_VIA_8235: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237_SATA: /* FIXME: add new ones for 8233/5 */ r->name = "VIA"; r->get = pirq_via_get; r->set = pirq_via_set; return 1; } The kernel goes fine but I haven't testes it for weeks, I'm just a moment after reboot :) One thing is different (better?): Using previus kernel I had: PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0 now I have: PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 11 Maybe it is good idea to add there some more VIA chipsets? The ones I have added seem to be OK. From: Grzegorz Janoszka <Grzegorz@Janoszka.pl> Acked-by: Martin Mares <mj@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11[PATCH] i386/x86-64: Remove checks for value == NULL in PCI config space accessAndi Kleen
Nobody should pass NULL here. Could in theory make it a BUG, but the NULL pointer oops will do as well. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] i386/x86-64: Return defined error value for bad PCI config space ↵Andi Kleen
accesses Mostly to get better handling when a extended config space access has to fallback to Type1. Cc: gregkh@suse.de Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] i386/x86_64: Check if MCFG works for the first 16 bussesAndi Kleen
Previously only the first bus would be checked against Type 1. Why 16? Checking all would need too much memory and we can assume that systems with more than 16 busses have better than average quality BIOS. This is an additional defense against bad MCFG tables. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Don't sanity check Type 1 PCI bus access on newer systemsAndi Kleen
Horus systems don't have anything on bus 0 which makes the Type 1 sanity checks fail. Use the DMI BIOS year to check for newer systems and always assume Type 1 works on them. I used 2001 as an pretty arbitary cutoff year. Cc: gregkh@suse.de Cc: Navin Boppuri <navin.boppuri@newisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] i386/x86-64: Check that MCFG points to an e820 reserved areaArjan van de Ven
This patch introduces a user for the e820_all_mapped function: There have been several machines that don't have a working MMCONFIG, often because of a buggy MCFG table in the ACPI bios. This patch adds a simple sanity check that detects a whole bunch of these cases, and when it detects it, linux now boots rather than crash-and-burns. The accuracy of this detection can in principle be improved if there was a "is this entire range in e820 with THIS attribute", but no such function exist and the complexity needed for this is not really worth it; this simple check already catches most cases anyway. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fixBernhard Kaindl
"In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment) Without it, Cardbus cards inserted are never seen by PCI because the parent PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI configuration cycles correctly and the system will fail to find and initialise the PCI devices in the system. Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering: http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html The reason for this is that: ``All PCI busses located behind a PCI-PCI bridge must reside between the secondary bus number and the subordinate bus number (inclusive).'' "pci=assign-busses" makes pcibios_assign_all_busses return 1 and this turns on PCI renumbering during PCI probing. Alan suggested to use DMI automatically set assign-busses on problem systems. The only question for me was where to put it. I put it directly before scanning PCI bus into pcibios_scan_root() because it's called from legacy, acpi and numa and so it can be one place for all systems and configurations which may need it. AMD64 Laptops are also affected and fixed by assign-busses, and the code is also incuded from arch/x86_64/pci/ that place will also work for x86_64 kernels, I only ifdef'-ed the x86-only Laptop in this example. Affected and known or assumed to be fixed with it are (found by googling): * ASUS Z71V and L3s * Samsung X20 * Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller, also Compaq R4000 series (from a kernel.org bugreport) * HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it) * HP zv5200z * IBM ThinkPad 240 * An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek gives the correspondig message which detects the possible problem. * MSI S260 / Medion SIM 2100 MD 95600 The patch also expands the "try pci=assign-busses" warning so testers will help us to update the DMI table. Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Give PCI config access initialization a defined orderingAndi Kleen
I moved it to a separate function which is safer. This avoids problems with the linker reordering them and the less useful PCI config space access methods taking priority over the better ones. Fixes some problems with broken MMCONFIG Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: handle bogus MCFG entriesAndi Kleen
Handle more bogus MCFG entries Some Asus P4 boards seem to have broken MCFG tables with only a single entry for busses 0-0. Special case these and assume they mean all busses can be accessed. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: irq and pci_ids: patch for Intel ICH8Jason Gaston
This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-14[PATCH] gx1fb: (try to) play nicer with various BIOSesDavid Vrabel
Seems that the CS5530A chip used in Geode GX1 systems has some crazy feature that causes SMI traps when accessing the PCI configuration space of the video device. Various GX1 BIOSes seem to use this 'feature' to hide the real BARs of the device. This patch disables these traps (in an early PCI fixup) so that Linux sees the real, physical BARs and not the virtual ones provided by the BIOS. This should allow the GX1 framebuffer driver to work on more systems that have different BIOSes as the driver no longer guesses at what the virtual BARs mean. I'm not entirely sure it the correct solution as I can neither test regular VGA console nor the X's 'cyrix' video driver so there might be some breakage there -- probably best to get some more testers before applying it. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] PCI: update Toshiba ohci quirk DMI tableJesse Barnes
I upgraded my Toshiba Satellite BIOS recently to see if it would fix an ACPI related problem I have (http://bugzilla.kernel.org/show_bug.cgi?id=5727). Unfortunately, it didn't, and moreover, Toshiba chose to change the system version in the DMI table with the update, causing the OHCI1394 related quirk to break. This patch updates the DMI table for the quirk to include Toshiba's new version name for this machine; I've tested it and it seems to work fine. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: irq.c: trivial printk and DBG updatesDaniel Marjamäki
Updated printk and DBG with appropriate KERN_*. Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: arch/i386/pci/acpi.c: use for_each_pci_devHanna Linder
Signed-off-by: Hanna Linder <hannal@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-06x86: remove bogus 'pci=usepirqmask' suggestion when no irq is definedLinus Torvalds
This was harmless, but for the case of a device that had no irq pre-defined we would incorrectly suggest that "usepirqmask" might make a difference. It never would, and the message was just confusing people. Reported in the dmesg of Etienne Lorrain. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] Fix build with CONFIG_PCI_MMCONFIGAndi Kleen
Now needs to include the type 1 functions ("direct") too. Reported by Pavel Roskin <proski@gnu.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[PATCH] PCI: Fix dumb bug in mmconfig fixAndi Kleen
Use correct address when referencing mmconfig aperture while checking for broken MCFG. This was a typo when porting the code from 64bit to 32bit. It caused oopses at boot on some ThinkPads. Should definitely go into 2.6.15. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15[PATCH] i386,amd64: mmconfig __iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] i386/x86-64 Correct for broken MCFG tables on K8 systemsAndi Kleen
They report all busses as MMCONFIG capable, but it never works for the internal devices in the CPU's builtin northbridge. It just probes all func 0 devices on bus 0 (the internal northbridge is currently always on bus 0) and if they are not accessible using MCFG they are put into a special fallback bitmap. On systems where it isn't we assume the BIOS vendor supplied correct MCFG. Requires the earlier patch for mmconfig type1 fallback Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] i386/x86-64 Fall back to type 1 access when no entry foundAndi Kleen
When there is no entry for a bus in MCFG fall back to type1. This is especially important on K8 systems where always some devices can't be accessed using mmconfig (in particular the builtin northbridge doesn't support it for its own devices) Cc: <gregkh@suse.de> Cc: <jgarzik@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23[PATCH] PCI: direct.c: DBGDaniel Marjamäki
The DBG() call where updated with the appropriate KERN_* symbol. Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23[PATCH] PCI: remove bogus resource collision errorRajesh Shah
When attempting to hotadd a PCI card with a bridge on it, I saw the kernel reporting resource collision errors even when there were really no collisions. The problem is that the code doesn't skip over "invalid" resources with their resource type flag not set. Others have reported similar problems at boot time and for non-bridge PCI card hotplug too, where the code flags a resource collision for disabled ROMs. This patch fixes both problems. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23[PATCH] PCI: trivial printk updates in common.cDaniel Marjamäkia
Modified common.c so it's using the appropriate KERN_* in printk() calls. Signed-off-by: Daniel Marjamäkia <daniel.marjamaki@comhem.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[PATCH] PCI: fix for Toshiba ohci1394 quirkJesse Barnes
After much testing and agony, I've discovered that my previous ohci1394 quirk for Toshiba laptops is not 100% reliable. It apparently fails to do the interrupt line change either correctly or in time, since in about 2 out of 5 boots, the kernel's irqdebug code will *still* disable irq 11 when the ohci1394 driver is loaded (at pci_enable_device time I think). This patch switches things around a little in the workaround. First, it removes the mdelay. I didn't see a need for it and my testing has shown that it's not necessary for the quirk to work. Secondly, instead of trying to change the interrupt line to what ACPI tells us it should be, this patch makes the quirk use the value in the PCI_INTERRUPT_LINE register. On this laptop at least, that seems to be the right thing to do, though additional testing on other laptops and/or with actual firewire devices would be appreciated. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-01[PATCH] toshiba_ohci1394_dmi_table should be __devinitdata, not __devinitRoland Dreier
I don't really understand why gcc gives the error it does, but without this patch, when building with CONFIG_HOTPLUG=n, I get errors like: CC arch/x86_64/pci/../../i386/pci/fixup.o arch/x86_64/pci/../../i386/pci/fixup.c: In function `pci_fixup_i450nx': arch/x86_64/pci/../../i386/pci/fixup.c:13: error: pci_fixup_i450nx causes a section type conflict The change is obviously correct: an array should be declared __devinitdata rather that __devinit. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Martin J. Bligh <mbligh@mbligh.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] asus vt8235 router buggy bios workaroundaleksey_gorelov@phoenix.com
Hopefully fix http://bugzilla.kernel.org/show_bug.cgi?id=5235 Similar problem has been reported before here: http://groups.google.com/group/linux.kernel/browse_thread/thread/def4ca19dbc3cd4/5cffbf349f2c87a4?tvc=2&q=Aleksey+Gorelov&hl=en#5cffbf349f2c87a4 and was related to bug in BIOS reporting 82C686 router compatible to 586. I suspect BIOS on this board has similar issue: reports VT8235 router to be compatible with 586 one - which is obviously not true. Patch from the link above has already incorporated in both 2.6 & 2.4 series, but might not work in this particular case. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] PCI fixup for Toshiba laptops and ohci1394Jesse Barnes
This is a fix for a bug I see on my Toshiba laptop, where the ohci1394 controller gets initialized improperly. The patch adds two PCI fixups to arch/i386/pci/fixup.c, one that happens early on to cache the value of the PCI_CACHE_LINE_SIZE config register, and another that later restores the value, along with a valid IRQ number and some BAR values. I've tested it on my laptop, and it prevents me from running into what I consider to be a major bug: IRQ 11 is disabled by the IRQ debug code, causing my wireless to break. Thanks to Rob for the original patch to ohci1394.c and Stefan for lots of proofreading (and a last minute bug caught in review!) and additional information collection. I think the DMI system list is correct, but we may need to add some more PCI IDs to the PCI_FIXUP macros over time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>