aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64/kernel/setup.c
AgeCommit message (Collapse)Author
2009-06-17[IA64] Convert ia64 to use int-ll64.hMatthew Wilcox
It is generally agreed that it would be beneficial for u64 to be an unsigned long long on all architectures. ia64 (in common with several other 64-bit architectures) currently uses unsigned long. Migrating piecemeal is too painful; this giant patch fixes all compilation warnings and errors that come as a result of switching to use int-ll64.h. Note that userspace will still see __u64 defined as unsigned long. This is important as it affects C++ name mangling. [Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use u64 for start/end rather than unsigned long] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-04-01[IA64] BUG to BUG_ON changesStoyan Gaydarov
Replace: if (test) BUG(); with BUG_ON(test); Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-31Pull pvops into release branchTony Luck
2009-03-26ia64/pv_ops: implement binary patching optimization for native.Isaku Yamahata
implement binary patching optimization for pv_cpu_ops. With this optimization, indirect call for pv_cpu_ops methods can be converted into inline execution or direct call. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-16cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: ia64Rusty Russell
Impact: cleanup, futureproof In fact, all cpumask ops will only be valid (in general) for bit numbers < nr_cpu_ids. So use that instead of NR_CPUS in various places. This is always safe: no cpu number can be >= nr_cpu_ids, and nr_cpu_ids is initialized to NR_CPUS at boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-11-07[IA64] Reserve elfcorehdr memory in CONFIG_CRASH_DUMPJay Lan
IA64 kdump kernel failed to initialize /proc/vmcore in 2.6.28-rc2. A bug was introduced in this patch commit: d9a9855d0b06ca6d6cc92596fedcc03f8512e062 always reserve elfcore header memory in crash kernel The problem was that the call to reserve_elfcorehdr() should be placed in CONFIG_CRASH_DUMP rather than in CONFIG_CRASH_KERNEL, which does not exist. Signed-off-by: Jay Lan <jlan@sgi.com> Acked-by: Simon Hormon <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-06[IA64] fix boot panic caused by offline CPUsDoug Chapman
This fixes a regression introduced by 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." That patch incorrectly used information about what CPUs are possible that was not yet initialized by ACPI. The end result was that per_cpu structures for offline CPUs were not initialized causing a NULL pointer reference. Since we cannot do the full acpi_boot_init() call any earlier, the simplest fix is to just parse the MADT for SAPIC entries early to find the CPU info. This should also allow for some cleanup of the code added by the "Minimize per_cpu reservations". This patch just fixes the regressions, the cleanup will come in a later patch. Signed-off-by: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> CC: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (41 commits) [IA64] Fix annoying IA64_TR_ALLOC_MAX message. [IA64] kill sys32_pipe [IA64] remove sys32_pause [IA64] Add Variable Page Size and IA64 Support in Intel IOMMU ia64/pv_ops: paravirtualized instruction checker. ia64/xen: a recipe for using xen/ia64 with pv_ops. ia64/pv_ops: update Kconfig for paravirtualized guest and xen. ia64/xen: preliminary support for save/restore. ia64/xen: define xen machine vector for domU. ia64/pv_ops/xen: implement xen pv_time_ops. ia64/pv_ops/xen: implement xen pv_irq_ops. ia64/pv_ops/xen: define the nubmer of irqs which xen needs. ia64/pv_ops/xen: implement xen pv_iosapic_ops. ia64/pv_ops/xen: paravirtualize entry.S for ia64/xen. ia64/pv_ops/xen: paravirtualize ivt.S for xen. ia64/pv_ops/xen: paravirtualize DO_SAVE_MIN for xen. ia64/pv_ops/xen: define xen paravirtualized instructions for hand written assembly code ia64/pv_ops/xen: define xen pv_cpu_ops. ia64/pv_ops/xen: define xen pv_init_ops for various xen initialization. ia64/pv_ops/xen: elf note based xen startup. ...
2008-10-20always reserve elfcore header memory in crash kernelSimon Horman
elfcore header memory needs to be reserved in a crash kernel. This means that the relevant code should be protected by CONFIG_CRASH_DUMP rather than CONFIG_PROC_VMCORE. Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20kdump: add is_vmcore_usable() and vmcore_unusable()Simon Horman
The usage of elfcorehdr_addr has changed recently such that being set to ELFCORE_ADDR_MAX is used by is_kdump_kernel() to indicate if the code is executing in a kernel executed as a crash kernel. However, arch/ia64/kernel/setup.c:reserve_elfcorehdr will rest elfcorehdr_addr to ELFCORE_ADDR_MAX on error, which means any subsequent calls to is_kdump_kernel() will return 0, even though they should return 1. Ok, at this point in time there are no subsequent calls, but I think its fair to say that there is ample scope for error or at the very least confusion. This patch add an extra state, ELFCORE_ADDR_ERR, which indicates that elfcorehdr_addr was passed on the command line, and thus execution is taking place in a crashdump kernel, but vmcore can't be used for some reason. This is tested for using is_vmcore_usable() and set using vmcore_unusable(). A subsequent patch makes use of this new code. To summarise, the states that elfcorehdr_addr can now be in are as follows: ELFCORE_ADDR_MAX: not a crashdump kernel ELFCORE_ADDR_ERR: crashdump kernel but vmcore is unusable any other value: crash dump kernel and vmcore is usable Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20kdump: make elfcorehdr_addr independent of CONFIG_PROC_VMCOREVivek Goyal
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE but also by the code which is not inside CONFIG_PROC_VMCORE. For example, is_kdump_kernel() is used by powerpc code to determine if kernel is booting after a panic then use previous kernel's TCE table. So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be able to correctly determine that we are booting after a panic and setup calgary iommu accordingly. o So remove the assumption that elfcorehdr_addr is under CONFIG_PROC_VMCORE. o Move definition of elfcorehdr_addr to arch dependent crash files. (Unfortunately crash dump does not have an arch independent file otherwise that would have been the best place). o kexec.c is not the right place as one can Have CRASH_DUMP enabled in second kernel without KEXEC being enabled. o I don't see sh setup code parsing the command line for elfcorehdr_addr. I am wondering how does vmcore interface work on sh. Anyway, I am atleast defining elfcoredhr_addr so that compilation is not broken on sh. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17[IA64] Add Variable Page Size and IA64 Support in Intel IOMMUFenghua Yu
The patch contains Intel IOMMU IA64 specific code. It defines new machvec dig_vtd, hooks for IOMMU, DMAR table detection, cache line flush function, etc. For a generic kernel with CONFIG_DMAR=y, if Intel IOMMU is detected, dig_vtd is used for machinve vector. Otherwise, kernel falls back to dig machine vector. Kernel parameter "machvec=dig" or "intel_iommu=off" can be used to force kernel to boot dig machine vector. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-09-22[IA64] Ski simulator doesn't need check_sal_cache_flushAlex Chiang
Peter Chubb reported that commit 3463a93def55c309f3c0d0a8aaf216be3be42d64 (Update check_sal_cache_flush to use platform_send_ipi()) broke Ski because it does not implement IPIs. Tony Luck suggested we just #ifndef out the call (since the simulator does not have the SAL bug that this code is attempting to detect and workaround) Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-12[IA64] Ensure cpu0 can access per-cpu variables in early boot codeTony Luck
ia64 handles per-cpu variables a litle differently from other architectures in that it maps the physical memory allocated for each cpu at a constant virtual address (0xffffffffffff0000). This mapping is not enabled until the architecture specific cpu_init() function is run, which causes problems since some generic code is run before this point. In particular when CONFIG_PRINTK_TIME is enabled, the boot cpu will trap on the access to per-cpu memory at the first printk() call so the boot will fail without the kernel printing anything to the console. Fix this by allocating percpu memory for cpu0 in the kernel data section and doing all initialization to enable percpu access in head.S before calling any generic code. Other cpus must take care not to access per-cpu variables too early, but their code path from start_secondary() to cpu_init() is all in arch/ia64 Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-01[IA64] Move include/asm-ia64 to arch/ia64/include/asmTony Luck
After moving the the include files there were a few clean-ups: 1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h> 2) Some comments alerted maintainers to look at various header files to make matching updates if certain code were to be changed. Updated these comments to use the new include paths. 3) Some header files mentioned their own names in initial comments. Just deleted these self references. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-17Pull pvops into release branchTony Luck
2008-06-30[IA64] Bugfix for system with 32 cpusTony Luck
On a system where there are no hot pluggable cpus "additional_cpus" is still set to -1 at the point where we call per_cpu_scan_finalize(). If we didn't find an SRAT table and so pick the default "32" for the number of cpus, when we get to: high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); we will end up initializing for just 31 cpus ... and so we will die horribly when bringing up cpu#32. Problem introduced by: 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." Acked-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-06-24[IA64] Fix boot failure on ia64/sn2Jes Sorensen
Call check_sal_cache_flush() after platform_setup() as check_sal_cache_flush() now relies on being able to call platform vector code. Problem was introduced by: 3463a93def55c309f3c0d0a8aaf216be3be42d64 "Update check_sal_cache_flush to use platform_send_ipi()" Signed-off-by: Jes Sorensen <jes@sgi.com> Tested-by: Alex Chiang: <achiang@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-27[IA64] pvops: define initialization hooks, pv_init_ops, for paravirtualized ↵Isaku Yamahata
environment. define pv_init_ops hooks which represents various initialization hooks for paravirtualized environment. and add hooks. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-27[IA64] Workaround for RSE issueTony Luck
Problem: An application violating the architectural rules regarding operation dependencies and having specific Register Stack Engine (RSE) state at the time of the violation, may result in an illegal operation fault and invalid RSE state. Such faults may initiate a cascade of repeated illegal operation faults within OS interruption handlers. The specific behavior is OS dependent. Implication: An application causing an illegal operation fault with specific RSE state may result in a series of illegal operation faults and an eventual OS stack overflow condition. Workaround: OS interruption handlers that switch to kernel backing store implement a check for invalid RSE state to avoid the series of illegal operation faults. The core of the workaround is the RSE_WORKAROUND code sequence inserted into each invocation of the SAVE_MIN_WITH_COVER and SAVE_MIN_WITH_COVER_R19 macros. This sequence includes hard-coded constants that depend on the number of stacked physical registers being 96. The rest of this patch consists of code to disable this workaround should this not be the case (with the presumption that if a future Itanium processor increases the number of registers, it would also remove the need for this patch). Move the start of the RBS up to a mod32 boundary to avoid some corner cases. The dispatch_illegal_op_fault code outgrew the spot it was squatting in when built with this patch and CONFIG_VIRT_CPU_ACCOUNTING=y Move it out to the end of the ivt. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-14[IA64] Don't reserve crashkernel memory > 4 GBBernhard Walle
Some IA64 machines map all cell-local memory above 4 GB (32 bit limit). However, in most cases, the kernel needs some memory below that limit that is DMA-capable. So in this machine configuration, the crashkernel will be reserved above 4 GB. For machines that use SWIOTLB implementation because they lack an I/O MMU the low memory is required by the SWIOTLB implementation. In that case, it doesn't make sense to reserve the crashkernel at all because it's unusable for kdump. A special case is the "hpzx1" machine vector. In theory, it has a I/O MMU, so it can be booted above 4 GB. However, in the kdump case that is not possible because of changeset 51b58e3e26ebfb8cd56825c4b396ed251f51dec9: On HP zx1 machines, the 'machvec=dig' parameter is needed for the kdump kernel to avoid problems with the HP sba iommu. The problem is that during the boot of the kdump kernel, the iommu is re-initialized, so in-flight DMA from improperly shutdown drivers causes an IOTLB miss which leads to an MCA. With kdump, the idea is to get into the kdump kernel with as little code as we can, so shutting down drivers properly is not an option. The workaround is to add 'machvec=dig' to the kdump kernel boot parameters. This makes the kdump kernel avoid using the sba iommu altogether, leaving the IOTLB intact. Any ongoing DMA falls harmlessly outside the kdump kernel. After the kdump kernel reboots, all devices will have been shutdown properly and DMA stopped. This patch pushes that functionality into the sba iommu initialization code, so that users won't have to find the obscure documentation telling them about 'machvec=dig'. This means that also for hpzx1 it's not possible to boot when all memory is above the 4 GB limit. So the only machine vectors that can handle this case are "sn2" and "uv". Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-17Pull miscellaneous into release branchTony Luck
Conflicts: arch/ia64/kernel/mca.c
2008-04-17Pull nptcg into release branchTony Luck
Conflicts: arch/ia64/mm/tlb.c
2008-04-11[IA64] Fix NUMA configuration issueZoltan Menyhart
There is a NUMA memory configuration issue in 2.6.24: A 2-node machine of ours has got the following memory layout: Node 0: 0 - 2 Gbytes Node 0: 4 - 8 Gbytes Node 1: 8 - 16 Gbytes Node 0: 16 - 18 Gbytes "efi_memmap_init()" merges the three last ranges into one. "register_active_ranges()" is called as follows: efi_memmap_walk(register_active_ranges, NULL); i.e. once for the 4 - 18 Gbytes range. It picks up the node number from the start address, and registers all the memory for the node #0. "register_active_ranges()" should be called as follows to make sure there is no merged address range at its entry: efi_memmap_walk(filter_memory, register_active_ranges); "filter_memory()" is similar to "filter_rsvd_memory()", but the reserved memory ranges are not filtered out. Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-08[IA64] Minimize per_cpu reservations.holt@sgi.com
This attached patch significantly shrinks boot memory allocation on ia64. It does this by not allocating per_cpu areas for cpus that can never exist. In the case where acpi does not have any numa node description of the cpus, I defaulted to assigning the first 32 round-robin on the known nodes.. For the !CONFIG_ACPI I used for_each_possible_cpu(). Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-04[IA64] Kernel parameter for max number of concurrent global TLB purgesFenghua Yu
The patch defines kernel parameter "nptcg=". The parameter overrides max number of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or SAL PALO. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-04[IA64] Multiple outstanding ptc.g instruction supportFenghua Yu
According to SDM2.2, Itanium supports multiple outstanding ptc.g instructions. But current kernel function ia64_global_tlb_purge() uses a spinlock to serialize ptc.g instructions issued by multiple processors. This serialization might have scalability issue on a big SMP machine where many processors could purge TLB in parallel. The patch fixes this problem by issuing multiple ptc.g instructions in ia64_global_tlb_purge(). It also adds support for the "PALO" table to get a platform view of the max number of outstanding ptc.g instructions (which may be different from the processor view found from PAL_VM_SUMMARY). PALO specification can be found at: http://www.dig64.org/home/DIG64_PALO_R1_0.pdf spinaphore implementation by Matthew Wilcox. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-03-06[IA64] remove remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Long lines have been kept where they exist, some small spacing changes have been done. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-04[IA64] constify function pointer tablesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-01-25sched: remove printk_clock references from ia64Ingo Molnar
remove remaining printk_clock references from ia64. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-07[IA64] rename _bss to __bss_startBernhard Walle
Rename _bss to __bss_start as on other architectures. That makes it possible to use the <linux/sections.h> instead of own declarations. Also add __bss_stop because that symbol exists on other architectures. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29[IA64] /proc/cpuinfo "physical id" field cleanupsAlex Chiang
Clean up the process for presenting the "physical id" field in /proc/cpuinfo. - remove global smp_num_cpucores, as it is mostly useless - remove check_for_logical_procs(), since we do the same functionality in identify_siblings() - reflow logic in identify_siblings(). If an older CPU does not implement PAL_LOGICAL_TO_PHYSICAL, we may still be able to get useful information from SAL_PHYSICAL_ID_INFO - in identify_siblings(), threads/cores are a property of the CPU, not the platform - remove useless printk's about multi-core / thread capability in identify_siblings(), as that information is readily available in /proc/cpuinfo, and printing for the BSP only adds little value - smp_num_siblings is now meaningful if any CPU in the system supports threads, not just the BSP - expose "physical id" field, even on CPUs that are not multi-core / multi-threaded (as long as we have a valid value). Now we know what sockets Madisons live in too. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-22kexec: add BSS to resource treeBernhard Walle
Add the BSS to the resource tree just as kernel text and kernel data are in the resource tree. The main reason behind this is to avoid crashkernel reservation in that area. While it's not strictly necessary to have the BSS in the resource tree (the actual collision detection is done in the reserve_bootmem() function before), the usage of the BSS resource should be presented to the user in /proc/iomem just as Kernel data and Kernel code. Note: The patch currently is only implemented for x86 and ia64 (because efi_initialize_iomem_resources() has the same signature on i386 and ia64). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: <linux-arch@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Use extended crashkernel command line on ia64Bernhard Walle
This patch adapts IA64 to use the generic parse_crashkernel() function instead of its own parsing for the crashkernel command line. Because the total amount of System RAM must be known when calling this function, efi_memmap_init() is modified to return its accumulated total_memory variable. Also, the crashkernel handling is moved in an own function in arch/ia64/kernel/setup.c to make the code more readable. [kamalesh@linux.vnet.ibm.com: build fix] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[IA64] Fix build for CONFIG_SMP=nTony Luck
d5a7430ddcdb598261d70f7eb1bf450b5be52085 missed a spot where we use cpu_sibling_map and cpu_core_map. These don't exist on a uni-processor build. Wrap #ifdef CONFIG_SMP ... #endif around it. Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-01[IA64] Enable early console for Ski simulatorPeter Chubb
This patch cleans up the `enable early console for SKI' patch (471e7a44848f467c9b83adc3463d019d2fa8817f), and 1. potentially allows the gensparse_defconfig to work again. (there are other problems running a generic kernel on Ski) 2. fixes the `console registered twice' problem. 3. Cleans up the code by moving the `extern hpsim_cons' declaration to a new asm/hpsim.h file. Thanks to Jes for comments. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-28[IA64] Clear pending interrupts at CPU boot up timeKenji Kaneshige
The pending interrupts can be remaining at boot up time on some platform. This will cause spurious interrupts when interrupt is enabled for the first time. This patch clears IVR at the CPU initialization to eliminate such spurious interrupts. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-17[IA64] Enable early console for Ski simulatorPeter Chubb
When using Ski to debug early startup, it's a bit of a pain not to have printk. This patch enables the simulated console very early. It may be worth conditionalising on the command line... but this is enough for now. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-30[IA64] Remove a few duplicate includesJesper Juhl
This patch removes a few duplicate includes from arch/ia64/ Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-25[IA64] Ensure that machvec is set up takes place before serial consoleHorms
Parse the machvec command line option outside of the early_param() so that ia64_mv is set before any console intialisation that may result from early_param parsing. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-19[PATCH] sched: sched_cacheflush is now unusedRalf Baechle
Since Ingo's recent scheduler rewrite which was merged as commit 0437e109e1841607f2988891eaa36c531c6aa6ac sched_cacheflush is unused. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-16serial: convert early_uart to earlycon for 8250Yinghai Lu
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-09sched: zap the migration init / cache-hot balancing codeIngo Molnar
the SMP load-balancer uses the boot-time migration-cost estimation code to attempt to improve the quality of balancing. The reason for this code is that the discrete priority queues do not preserve the order of scheduling accurately, so the load-balancer skips tasks that were running on a CPU 'recently'. this code is fundamental fragile: the boot-time migration cost detector doesnt really work on systems that had large L3 caches, it caused boot delays on large systems and the whole cache-hot concept made the balancing code pretty undeterministic as well. (and hey, i wrote most of it, so i can say it out loud that it sucks ;-) under CFS the same purpose of cache affinity can be achieved without any special cache-hot special-case: tasks are sorted in the 'timeline' tree and the SMP balancer picks tasks from the left side of the tree, thus the most cache-cold task is balanced automatically. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-05-11[IA64] spelling fixes: arch/ia64/Simon Arlott
Spelling and apostrophe fixes in arch/ia64/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-07[IA64] Fix some section mismatch errorsTony Luck
Section mismatch: reference to ... .init.text:prefill_possible_map from .text between 'setup_per_cpu_areas' and 'cpu_init' .init.text:iosapic_override_isa_irq from .text between 'iosapic_init' and 'iosapic_remove' Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-30Pull percpu-dtc into release branchTony Luck
2007-04-06[IA64] Fix CPU freq displayed in /proc/cpuinfoVenki Pallipadi
My patch: git commit=95235ca2c20ac0b31a8eb39e2d599bcc3e9c9a10 introduced a bug in IA64 cpuinfo output. Patch changed the proc_freq from 1HZ resolution to 1KHz resolution, but left format string unchanged at " %lu.%06lu". Below is the fix. Thanks to Bjorn for catching this. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Fix get_model_name() for mixed cpu type systemsJack Steiner
If a system consists of mixed processor types, kmalloc() can be called before the per-cpu data page is initialized. If the slab contains sufficient memory, then kmalloc() works ok. However, if the slabs are empty, slab calls the memory allocator. This requires per-cpu data (NODE_DATA()) & the cpu dies. Also noted by Russ Anderson who had a very similar patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-07[IA64] remove duplicate declaration of efi_initialize_iomem_resourcesHorms
efi_initialize_iomem_resources() is declared in both include/linux/efi.h and arch/ia64/kernel/setup.c. This patch removes the latter. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>