aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/Makefile
AgeCommit message (Collapse)Author
2009-03-30MIPS: Makefile: Add simple make install target.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13MIPS: Mark Eins: Fix configuration.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Move development board code to common subdirectoryManuel Lauss
This should ease sharing of common devboard code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Hook up Cavium OCTEON in arch/mips.David Daney
Take all the OCTEON specific files that were added, and hook them into the build system for the arch/mips. For versions of GCC that lack OCTEON support, override gas target architecture. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/Shinya Kuribayashi
git mv arch/mips/{emma2rh,emma} and fixups Makefiles. We'll put all NEC EMMA series based machines there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add support for NXP PNX833x (STB222/5) into linux kernelDaniel Laird
The following patch add support for the NXP PNX833x SOC. More specifically it adds support for the STB222/5 variant. It fixes the vectored interrupt issue. Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Alchemy: rename directoryRalf Baechle
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-07-20[MIPS] Routerboard 532: Support for base systemRalf Baechle
Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xxAtsushi Nemoto
Rename mach-jmr3927 directory to more proper name to make adding other platforms easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] cmbvr4133: Remove supportYoichi Yuasa
It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Make single kernel can support multiple boardsAtsushi Nemoto
Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Reorganize codeAtsushi Nemoto
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Malta: Cleanup organization of code into directories.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove always true ifdef conditions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] SEAD: Remove support code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Atlas: Remove support code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Enable -ffunction-sections sections.Ralf Baechle
-ffunction-sections serves as a workaround for the problems caused by the limited branch range in some inline assembler fragments for very large compilation units. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16[MIPS] Sibyte: Build RTC support as an objectMaciej W. Rozycki
Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16[MIPS] Better load address for big endian SNI RMThomas Bogendoerfer
Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Move arch/mips/philips to arch/mips/nxpDaniel Laird
Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Check for GCC r10k-cache-barrier supportThomas Bogendoerfer
Check whether gcc supports -mr10-cache-barrier=1 and issue a cleaner error message if not. This option is needed to build working SGI IP28 kernels. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12[MIPS] Use KBUILD_DEFCONFIGAdrian Bunk
With KBUILD_DEFCONFIG we don't have to ship a second copy of ip22_defconfig. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] Qemu: Remove platform.Ralf Baechle
The Qemu platform was originally implemented to have an easily supportable platform until Qemu reaches a state where it emulates a real world system. Since the latest release Qemu is capable of emulating the MIPSsim and Malta platforms, so this goal has been reached. The Qemu plaform is also rather underfeatured so less useful than a Malta emulation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] Altas, Malta: Switch boot file format to raw.Ralf Baechle
A raw binary boots about twice as fast as SREC. The possibility to generate SREC binaries remains by simply using the vmlinux.srec target but seems only useful for the probably hypothetical case where one of these systems is booted over a serial interface. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] RM: Collected changesThomas Bogendoerfer
- EISA support for non PCI RMs (RM200 and RM400-xxx). The major part is the splitting of the EISA and onboard ISA of the RM200, which makes the EISA bus on the RM200 look like on other RMs. - 64bit kernel support - system type detection is now common for big and little endian - moved sniprom code to arch/mips/fw - added call_o32 function to arch/mips/fw/lib, which uses a private stack for calling prom functions - fix problem with ISA interrupts, which makes using PIT clockevent possible Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] IP28 supportThomas Bogendoerfer
Add support for SGI IP28 machines (Indigo 2 with R10k CPUs) This work is mainly based on Peter Fuersts work. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] R4000/R4400 errata workaroundsMaciej W. Rozycki
This is the gereric part of R4000/R4400 errata workarounds. They include compiler and assembler support as well as some source code modifications to address the problems with some combinations of multiply/divide+shift instructions as well as the daddi and daddiu instructions. Changes included are as follows: 1. New Kconfig options to select workarounds by platforms as necessary. 2. Arch top-level Makefile to pass necessary options to the compiler; also incompatible configurations are detected (-mno-sym32 unsupported as horribly intrusive for little gain). 3. Bug detection updated and shuffled -- the multiply/divide+shift problem is lethal enough that if not worked around it makes the kernel crash in time_init() because of a division by zero; the daddiu erratum might also trigger early potentially, though I have not observed it. On the other hand the daddi detection code requires the exception subsystem to have been initialised (and is there mainly for information). 4. r4k_daddiu_bug() added so that the existence of the erratum can be queried by code at the run time as necessary; useful for generated code like TLB fault and copy/clear page handlers. 5. __udelay() updated as it uses multiplication in inline assembly. Note that -mdaddi requires modified toolchain (which has been maintained by myself and available from my site for ~4years now -- versions covered are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards). The -mfix-r4000 and -mfix-r4400 have been standard for a while though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Makefile: Fix canonical system namesMaciej W. Rozycki
The GNU `config.guess' uses "linux-gnu" as the canonical system name. Fix the list of compiler prefixes checked to spell it correctly. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] Kbuild: Use the new cc-cross-prefix feature.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-11[MIPS] Don't abort the build process if '-msym32' isn't supportedFranck Bui-Huu
-msym32 and previously the strategy to tell the compiler to generate 64-bit code but the assembler to put it into 32-bit ELF was initially a hack to get around the lack of proper 64-bit binutils support and later turned into a neat optimization with significant code size savings. But it's really just an optimization so there is nothing wrong with just dropping the option (and whatever else goes along with it, I forgot all the nasty details) on the floor if due to a vintage compiler it can't be suported. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Move ARC code into arch/mips/fw/arcAurelien Jarno
Move the ARC code to arch/mips/fw/arc from arch/mips/arc. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Move CFE code into arch/mips/fw/cfeAurelien Jarno
Move the platform independent part of the CFE code to arch/mips/fw/cfe from arch/mips/sibyte/cfe. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Add support for BCM47XX CPUs.Aurelien Jarno
Note that the BCM4710 does not support the wait instruction, this is not a mistake in the code. It originally comes from the OpenWrt patches. Cc: Michael Buesch <mb@bu3sch.de> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Florian Schirmer <jolt@tuxbox.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Add back support for LASAT platformsBrian Murphy
Signed-off-by: Brian Murphy <brian@murphy.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Rename CONFIG_BUILD_ELF64 into KBUILD_64BIT_SYM32Franck Bui-Huu
This patch renames it for 3 reasons: - "CONFIG" pattern is used by Kconfig. Now this macro is no more defined by Kconfig but by Kbuild itself make this clear by translating "CONFIG" into "KBUILD". - "ELF32" word is improper because it is irrelevant to ELF format and it makes confusion with CONFIG_BOOT_ELF32. So translate it with SYM32. - Add "64BIT" part to make clear that this macro implies a 64 bits kernel. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Automatically set CONFIG_BUILD_ELF64Franck Bui-Huu
We do not rely on user anymore to setup this config correctly. Instead we make our choice depending on the load address. If we want to force Kbuild to use ELF64 format whatever the load address we can still do: $ make BUILD_ELF32=no Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Remove '-mno-explicit-relocs' option when CONFIG_BUILD_ELF64Franck Bui-Huu
This patch removes '-mno-explicit-relocs' usage when CONFIG_BUILD_ELF64 is set since this option was only required with the old hack to truncate addresses at the assembly level where "-mabi=64 -Wa,-mabi=32" was used. This should yield a small code size improvement for inline assembly, where the R constraint is used. The idea is coming from Maciej <macro@linux-mips.org>. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] DDB5477: Remove supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Remove Momentum Ocelot support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Fix archhelp.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Cleanup default bootfile format rule mess.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24[MIPS] MIPSsim: Fix cflagsYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Delete Ocelot 3 support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>