aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)Author
2008-11-20MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: RB532: Provide functions for gpio configurationPhil Sutter
As gpiolib doesn't support pin multiplexing, it provides no way to access the GPIOFUNC register. Also there is no support for setting interrupt status and level. These functions provide access to them and are needed by the CompactFlash driver. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: RB532: GPIO register offsets are relative to GPIOBASEFlorian Fainelli
This patch fixes the wrong use of GPIO register offsets in devices.c. To avoid further problems, use gpio_get_value to return the NAND status instead of our own expanded code. Also define the zero offset of the alternate function register to allow consistent access. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.Ralf Baechle
It was only used by this one SGI platform which recently was converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused DS1286 driver.Ralf Baechle
It was only used by two SGI platforms which recently were converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: Use the new byteorder headersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Switch FPU emulator trap to BREAK instruction.Ralf Baechle
Arguably using the address error handler has always been ugly. But with processors that handle unaligned loads and stores in hardware the current mechanism ceases to work so switch it to a BREAK instruction and allocate break code 514 to the FPU emulator. Yoichi Yuasa provided a build fix for CONFIG_BUG=n. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: Clean up MIPSxx-optimized bitop functionsRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: New feature test macro cpu_has_mips_rRalf Baechle
cpu_has_mips_r is true if a processor is MIPS32 or MIPS64, any architecture revision. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: lemote/lm2e: Added io_map_base to pci controllerZhang Le
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sync on read operationShinya Kuribayashi
It's totally a waste of CPU cycles. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dirShinya Kuribayashi
We'll put all EMMA related headers there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add support for NXP PNX833x (STB222/5) into linux kernelDaniel Laird
The following patch add support for the NXP PNX833x SOC. More specifically it adds support for the STB222/5 variant. It fixes the vectored interrupt issue. Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorYoichi Yuasa
In file included from include/linux/ptrace.h:49, from arch/mips/kernel/kgdb.c:25: /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32' make[1]: *** [arch/mips/kernel/kgdb.o] Error 1 Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RBTX4939: Add smc91x supportAtsushi Nemoto
Add smc91x platform device to RBTX4939 board and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: 7 segment LED supportAtsushi Nemoto
Add sysfs interface for 7 segment LED and implement access routine for RBTX4939. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorDavid Daney
<asm/ptrace.h> is exported to userland so can't include <linux/ptrace.h>, so replace the C99 types with their basic C type equivalents. Bug originally reported and initial patch by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-23TXx9: Add TX4938 ATA support (v3)Atsushi Nemoto
Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-20mips: use bcd2bin/bin2bcdAdrian Bunk
Changes mips to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16[PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITYMartin Schwidefsky
The SET_PERSONALITY macro is always called with a second argument of 0. Remove the ibcs argument and the various tests to set the PER_SVR4 personality. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-15MIPS: IP22/28: Switch over to RTC class driverThomas Bogendoerfer
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Remove references to BCM947XXAurelien Jarno
This patch removes the remaining reference to the BCM947xx development board codename. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Fix wrong branch target in new spin_lock code.Johannes Dickgreber
Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Have a heart for a lonely, lost header file ...Ralf Baechle
... and move it to where all its brothers and sisters reside. Requested by Shane McDonald <mcdonald.shane@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-13ide-generic: remove no longer needed ide_probe_legacy()Bartlomiej Zolnierkiewicz
There is now a generic solution [ide_generic_check_pci_legacy_iobases()] so MIPS-specific ide_probe_legacy() is no longer necessary. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-11MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irqFlorian Fainelli
This patchs defines the number of built-in the GPIOs present on the SoC as Documentation/gpio.txt recommends to do. Define irq_to_gpio/gpio_to_irq to return the right values so that it fixes a compilation error on drivers/gpio/gpiolib.c when enabling debugfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move ptrace prototypes to ptrace.hRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Ptrace support for HARDWARE_WATCHPOINTSDavid Daney
This is the final part of the watch register patch. Here we hook up ptrace so that the user space debugger (gdb), can set and read the registers. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Scheduler support for HARDWARE_WATCHPOINTS.David Daney
Here we hook up the scheduler. Whenever we switch to a new process, we check to see if the watch registers should be installed, and do it if needed. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.David Daney
This is the main support code for the patch. Here we just add the code, the following patches hook it up. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c
2008-10-11MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add TX4939 ATA support (v2)Atsushi Nemoto
Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Rewrite spinlocks to ticket locks.Ralf Baechle
Based on patch by Chad Reese of Cavium Networks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 03:07:57 +0000