aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/kernel
AgeCommit message (Collapse)Author
2006-12-04[MIPS] Cleanup memory barriers for weakly ordered systems.Ralf Baechle
Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync needed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-04[MIPS] Use SYSVIPC_COMPAT to fix various problems on N32Atsushi Nemoto
N32 SysV IPC system calls should use 32-bit compatible code. arch/mips/kernel/linux32.c have similar compatible code for O32, but ipc/compat.c seems more complete. We can use it for both N32 and O32. This patch should fix these problems (and other possible problems): http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.com Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Remove duplicate ISA DMA code for 0 DMA channel case.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Use conditional traps for BUG_ON on MIPS II and better.Ralf Baechle
This shaves of around 4kB and a few cycles for the average kernel that has CONFIG_BUG enabled. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] mips HPT cleanup: make clocksource_mips publicAtsushi Nemoto
Make clocksource_mips public and get rid of mips_hpt_read, mips_hpt_mask. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] do_IRQ cleanupAtsushi Nemoto
Now we have both function and macro version of do_IRQ() and the former is used only by DEC and non-preemptive kernel. This patch makes everyone use the macro version and removes the function version. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Work around bogus gcc warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Fix double inclusionsNicolas Kaiser
Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irqAtsushi Nemoto
Further incorporation of generic irq framework. Replacing __do_IRQ() by proper flow handler would make the irq handling path a bit simpler and faster. * use generic_handle_irq() instead of __do_IRQ(). * use handle_level_irq for obvious level-type irq chips. * use handle_percpu_irq for irqs marked as IRQ_PER_CPU. * setup .eoi routine for irq chips possibly used with handle_percpu_irq. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] IRQ cleanupsAtsushi Nemoto
This is a big irq cleanup patch. * Use set_irq_chip() to register irq_chip. * Initialize .mask, .unmask, .mask_ack field. Functions for these method are already exist in most case. * Do not initialize .startup, .shutdown, .enable, .disable fields if default routines provided by irq_chip_set_defaults() were suitable. * Remove redundant irq_desc initializations. * Remove unnecessary local_irq_save/local_irq_restore, spin_lock. With this cleanup, it would be easy to switch to slightly lightwait irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ(). Though whole this patch is quite large, changes in each irq_chip are not quite simple. Please review and test on your platform. Thanks. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] mips hpt cleanup: get rid of mips_hpt_initAtsushi Nemoto
Currently nobody outside time.c require mips_hpt_init(). Remove it and call c0_hpt_timer_init() directly if R4k counter was used for timer interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Add support for kexecNicolas Schichan
A tiny userland application loading the kernel and invoking kexec_load for mips is available here: http://chac.le-poulpe.net/~nico/kexec/kexec-2006-10-18.tar.gz Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Don't print presence of WAIT instruction on bootup.Ralf Baechle
Not useful and quite a big of noise on bootup of large systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Fast path for rdhwr emulation for TLSAtsushi Nemoto
Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=nAtsushi Nemoto
This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] setup.c: clean up initrd related codeFranck Bui-Huu
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] setup.c: use __pa_symbol() where neededFranck Bui-Huu
It should fix the broken code in resource_init() too. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] setup.c: get ride of CPHYSADDR()Franck Bui-Huu
and use new __pa() implementation instead introduced by the previous patch. Indeed this macro can be used now even by the 64 bit kernels with CONFIG_BUILD_ELF64=n config. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-29[MIPS] Do topology_init even on uniprocessor kernels.Ralf Baechle
Otherwise CPU 0 doesn't show up in sysfs which breaks some software. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-06[MIPS] Make irq number allocator generally available for fixing EV64120.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-02[MIPS] Fix warning about init_initrd() call if !CONFIG_BLK_DEV_INITRD.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-01[MIPS] SMTC: Synchronize cp0 counters on bootup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-01[MIPS] SMTC: Fix crash if # of TC's > # of VPE's after pt_regs irq cleanup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-01[MIPS] 16K & 64K page size fixesRalf Baechle
Derived from Peter Watkins <treestem@gmail.com>'s work. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] Fixup migration to GENERIC_TIMEAtsushi Nemoto
Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] VSMP: Synchronize cp0 counters on bootup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] VSMP: Fix initialization ordering bug.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] Fix warning of printk format in mips_srs_init()Yoichi Yuasa
arch/mips/kernel/traps.c:1115: warning: int format, long unsigned int arg (arg 2) Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[MIPS] Wire up getcpu(2) and epoll_wait(2) syscalls.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-27[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-19[MIPS] Reserve syscall numbers for kexec_load.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] save_context_stack fixAtsushi Nemoto
CONFIG_KALLSYMS=n case is obviously wrong, though it is harmless since CONFIG_KALLSYMS is always enabled with CONFIG_STACKTRACE for now. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] Use compat_sys_mount.Ralf Baechle
This fixes mount problems with smbfs, ncpfs and NFSv4. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] Fix O32 personality(2) call with 0xffffffff argument.Thiemo Seufer
A sign extension bug did result in sys_personality being invoked with a 0xffffffffffffffffUL argument, so querying the current personality didn't work. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] Use kallsyms_lookup_size_offset() instead of kallsyms_lookup()Franck Bui-Huu
This new routine doesn't lookup for symbol names. So we needn't to pass any char buffers or pointer since we don't care about names. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11[MIPS] Pass NULL not 0 for pointer value.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] Make sure cpu_has_fpu is used only in atomic contextAtsushi Nemoto
Make sure cpu_has_fpu (which uses smp_processor_id()) is used only in atomic context. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] NUMA: Register all nodes before cpus or sysfs will barf.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] ret_from_irq adjustmentAtsushi Nemoto
Make sure that RA on top of interrupt stack is an address of ret_from_irq, so that dump_stack etc. can trace info interrupted context. Also this patch fixes except_vec_vi_handler and __smtc_ipi_vector which seems broken. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] Fix RM9000 wait instruction detection.Ralf Baechle
Only revisions < 4.0 don't have a functional wait instruction. From Thomas Koeller (Thomas.Koeller@baslerweb.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09[MIPS] Cleanup unnecessary <asm/ptrace.h> inclusions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08[MIPS] Complete fixes after removal of pt_regs argument to int handlers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08[MIPS] Show actual CPU information in /proc/cpuinfoKarl-Johan Karlsson
Currently, /proc/cpuinfo contains several copies of the information for whatever processor we happen to be scheduled on. This patch makes it contain the proper information for each CPU, which is particularly useful on mixed R12k/R10k IP27 machines. Signed-off-by: Karl-Johan Karlsson <creideiki@lysator.liu.se> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03[MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03[PATCH] VFS: Make filldir_t and struct kstat deal in 64-bit inode numbersDavid Howells
These patches make the kernel pass 64-bit inode numbers internally when communicating to userspace, even on a 32-bit system. They are required because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS for example. The 64-bit inode numbers are then propagated to userspace automatically where the arch supports it. Problems have been seen with userspace (eg: ld.so) using the 64-bit inode number returned by stat64() or getdents64() to differentiate files, and failing because the 64-bit inode number space was compressed to 32-bits, and so overlaps occur. This patch: Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit inode number so that 64-bit inode numbers can be passed back to userspace. The stat functions then returns the full 64-bit inode number where available and where possible. If it is not possible to represent the inode number supplied by the filesystem in the field provided by userspace, then error EOVERFLOW will be issued. Similarly, the getdents/readdir functions now pass the full 64-bit inode number to userspace where possible, returning EOVERFLOW instead when a directory entry is encountered that can't be properly represented. Note that this means that some inodes will not be stat'able on a 32-bit system with old libraries where they were before - but it does mean that there will be no ambiguity over what a 32-bit inode number refers to. Note similarly that directory scans may be cut short with an error on a 32-bit system with old libraries where the scan would work before for the same reasons. It is judged unlikely that this situation will occur because modern glibc uses 64-bit capable versions of stat and getdents class functions exclusively, and that older systems are unlikely to encounter unrepresentable inode numbers anyway. [akpm: alpha build fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Remove unused galileo-boars header files [MIPS] Rename SERIAL_PORT_DEFNS for EV64120 [MIPS] Add UART IRQ number for EV64120 [MIPS] Remove excite_flash.c [MIPS] Update i8259 resources. [MIPS] Make unwind_stack() can dig into interrupted context [MIPS] Stacktrace build-fix and improvement [MIPS] QEMU: Add support for little endian mips [MIPS] Remove __flush_icache_page [MIPS] lockdep: update defconfigs [MIPS] lockdep: Add STACKTRACE_SUPPORT and enable LOCKDEP_SUPPORT [MIPS] lockdep: fix TRACE_IRQFLAGS_SUPPORT
2006-10-02[PATCH] BLOCK: Revert patch to hack around undeclared sigset_t in linux/compat.hDavid Howells
Revert Andrew Morton's patch to temporarily hack around the lack of a declaration of sigset_t in linux/compat.h to make the block-disablement patches build on IA64. This got accidentally pushed to Linus and should be fixed in a different manner. Also make linux/compat.h #include asm/signal.h to gain a definition of sigset_t so that it can externally declare sigset_from_compat(). This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and ppc64 and run-tested on frv. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] provide kernel_execve on all architecturesArnd Bergmann
This adds the new kernel_execve function on all architectures that were using _syscall3() to implement execve. The implementation uses code from the _syscall3 macros provided in the unistd.h header file. I don't have cross-compilers for any of these architectures, so the patch is untested with the exception of i386. Most architectures can probably implement this in a nicer way in assembly or by combining it with the sys_execve implementation itself, but this should do it for now. [bunk@stusta.de: m68knommu build fix] [markh@osdl.org: build fix] [bero@arklinux.org: build fix] [ralf@linux-mips.org: mips fix] [schwidefsky@de.ibm.com: s390 fix] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] namespaces: utsname: switch to using uts namespacesSerge E. Hallyn
Replace references to system_utsname to the per-process uts namespace where appropriate. This includes things like uname. Changes: Per Eric Biederman's comments, use the per-process uts namespace for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c [jdike@addtoit.com: UML fix] [clg@fr.ibm.com: cleanup] [akpm@osdl.org: build fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>