aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2006-06-23[PATCH] mips: fix number of mremap argumentsYoichi Yuasa
mremap syscall takes 5 arguments. Fixed by Ralf Baechle. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to perform statfs with a known root dentryDavid Howells
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[MIPS] Make timer interrupt frequency configurable from kconfig.Atsushi Nemoto
Make HZ configurable. DECSTATION can select 128/256/1024 HZ, JAZZ can only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if not explicitly specified). Also remove all mach-xxx/param.h files and update all defconfigs according to current HZ value. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.Ralf Baechle
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins boarddmitry pervushin
Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.Thomas Bogendoerfer
Added support for RM200C machines with big endian firmware Added support for RM200-C40 (R5000 support) Signed-off-by: Florian Lohoff <flo@rfc822.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Random fixes for sb1250Thiemo Seufer
Random improvements for sb1250: Silence compiler warnings, a bugfix for the profiling code, and a comment typo. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Fix bcm1480 compileThiemo Seufer
Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove support for NEC DDB5476.Ralf Baechle
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove support for NEC DDB5074.Ralf Baechle
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Cleanup memory managment initialization.Ralf Baechle
Historically plat_mem_setup did the entire platform initialization. This was rather impractical because it meant plat_mem_setup had to get away without any kind of memory allocator. To keep old code from breaking plat_setup was just renamed to plat_setup and a second platform initialization hook for anything else was introduced. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove unused function alloc_pci_controller.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Extract pci_ops into separate file.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Use symbolic constants instead of magic numbers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.Yoichi Yuasa
Remove unnecessary items from vr41xx/Kconfig. SYS_HA_CPU_VR41XX has already been selected by MACH_VR41XX. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Cleanup N/M mode configuration.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] APM emu supportRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] SN: Rename SGI_SN0_N_MODE -> SGI_SN_N_MODE.Ralf Baechle
It's not SN0-specific. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Cleanup ARCH_DISCONTIGMEM_ENABLE and NUMA configuration.Ralf Baechle
IP27 configuration isn't the only NUMA system - it just happens to be the currently only supported MIPS NUMA system. So move the necessary options back into the main MIPS Kconfig file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] C99-ify struct resource initialization.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove duplicate declarations from Alchemy code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] arch/mips/au1000/time.c cleanupSergei Shtylyov
Mark au1xxx_timer_setup() __init, just because it is. Get rid of unneeded extern's (note that (*do_gettimeoffset)() is already declared by <asm/time.c>) and an unused variable. Kill some whitespace... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove unused instances of prom_build_cpu_map.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Qemu system shutdown supportThiemo Seufer
Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Unify mips_fpu_soft_struct and mips_fpu_hard_structs.Atsushi Nemoto
The struct mips_fpu_soft_struct and mips_fpu_hard_struct are completely same now and the kernel fpu emulator assumes that. This patch unifies them to mips_fpu_struct and get rid of mips_fpu_union. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove prototype for non-existing function.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Wind River 4KC PPMC Eval Board SupportMark.Zhan
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board. Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Au1xxx: board specific irq code cleanupHerbert Valerio Riedel
Convert sizeof/sizeof use to use of ARRAY_SIZE macro, and annotate irqmap structures as __initdata. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Fix collision with hardcoded interrupt number.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[PATCH] Fix BCM1480 doubled process accounting times.[MIPS] James E Wilson
Running a UP kernel on a bcm1480 board, I get nonsensical timing results, like this: release@unknown:~/tmp$ time ./a.out real 0m22.906s user 0m45.792s sys 0m0.010s According to my watch, this program took 23 seconds to run, so the real time clock is OK. It is process accounting that is broken. I tracked this down to a problem with the function bcm1480_timer_interrupt in the file sibyte/bcm1480/time.c. This function calls ll_timer_interrupt for cpu0, and ll_local_timer_interrupt for all cpus. However, both of these functions do process accounting. Thus processes running on cpu0 end up with doubled times. This is very obvious in a UP kernel where all processes run on cpu0. The correct way to do this is to only call ll_local_timer interrupt if this is not cpu0. This can be seen in the mips-board/generic/time.c file, and also in the sibyte/sb1250/time.c file, both of which handle this correctly. I fixed the bcm1480/time.c file by copying over the correct code from the sb1250/time.c file. With this fix, I now get sensible results. release@unknown:~/tmp$ time ./a.out real 0m22.903s user 0m22.894s sys 0m0.006s Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Mark PNX8550 support broken.Ralf Baechle
Broken in too many way for me to fix it for 2.6.17. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Fix optimization for size build.Ralf Baechle
It took a while longer than on other architectures but gcc has finally started to strike us as well ... This also fixes the damage by 6edfba1b33c701108717f4e036320fc39abe1912. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP22: Fix ISA driver builds if CONFIG_EISA is selected.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Cobalt: Fix undefined reference to disable_early_printk.Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Fix fpu_save_double on 64-bit.Atsushi Nemoto
> Without this fix, _save_fp() in 64-bit kernel is seriously broken. > > ffffffff8010bec0 <_save_fp>: > ffffffff8010bec0: 400d6000 mfc0 t1,c0_status > ffffffff8010bec4: 000c7140 sll t2,t0,0x5 > ffffffff8010bec8: 05c10011 bgez t2,ffffffff8010bf10 <_save_fp+0x50> > ffffffff8010becc: 00000000 nop > ffffffff8010bed0: f4810328 sdc1 $f1,808(a0) > ... Fix register usage in fpu_save_double() and make fpu_restore_double() more symmetric with fpu_save_double(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Malta: Handle byteswapping hardare bug in big endian mode.Elizabeth Oldham
The SOC-it system controller running in big endian mode might forget byteswapping when DMAing to the last word of physical memory. Fixed by ignoring the last page of memory. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-05Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] typo: buad -> baud
2006-06-06[MIPS] Fix sparsemem support.Chad Reese
Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem extreme, this function does an allocate for bootmem. This would always fail since init_bootmem hasn't been called yet. Move memory_present after free_bootmem. This only marks actual memory ranges as present instead of the entire address space. Signed-off-by: Chad Reese <creese@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Fix compiler warnings (field width, unused variable)Atsushi Nemoto
Fix following warnings: linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2) linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4) linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len' linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name' linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc' (original patch by Atsushi, slight changes to the setup.c part by me.) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Fix sparse warnings about too big constants.Atsushi Nemoto
Fix following warnings: linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] IP32: Fix warnings.Ralf Baechle
The expressions are volatile; no need for temporary variables. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] SB1: Only pass1 FPUs are broken beyond recovery.Ralf Baechle
The wrong revision number in the check was forcing a fallback to FPU emulation for all SB1 cores in 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] open() forces O_LARGEFILE for o32 on 64bit kernelsThiemo Seufer
open() always sets the O_LARGEFILE flag for the o32 ABI implementation of a 64bit kernel. The appended patch fixes it. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Au1xx0: fix prom_getenv() to handle YAMON style environmentSergei Shtylyov
Alchemy boards use YAMON which passes the environment variables as the tuples of strings (the name followed by the value) unlike PMON which passes "name=<val>" strings. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Save write-only Config.OD from being clobberedSergei Shtylyov
Save the Config.OD bit from being clobbered by coherency_setup(). This bit, when set, fixes various errata in the early steppings of Au1x00 SOCs. Unfortunately, the bit was write-only on the most early of them. In addition, also restore the bit after a wakeup from sleep. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Print more information if we're struck by a machine check exception.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Fix modpost warning: Rename op_model_xxx to op_model_xxx_ops.Atsushi Nemoto
The modpost uses a whitelist for commonly used suffix on checking the section mismatch. Adding "_ops" suffix to op_modex_xxx get rid of this modpost warning. WARNING: arch/mips/oprofile/oprofile.o - Section mismatch: reference to .init.text: from .data after 'op_model_mipsxx' (at offset 0x528) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Ignore unresolved weak symbols in modules.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06[MIPS] Fix SMP now that fixup_cpu_present_map is gone.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-05[SERIAL] typo: buad -> baudHorst Schirmeier
Replacing mistyped "buad" with "baud" where applicable. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>