aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2009-07-27mm: Remove duplicate definitions in MIPS and SHBenjamin Herrenschmidt
Those definitions are already provided by asm-generic Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()Benjamin Herrenschmidt
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-10sched: INIT_PREEMPT_COUNTPeter Zijlstra
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-03MIPS: Fix CONFIG_FLATMEM version of pfn_valid()Ralf Baechle
For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely have returned 0 on most configurations. Bug introduced by commit 752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp. 6f284a2ce7b8bc49cb8455b1763357897a899abb (kernel.org) titled "[MIPS] FLATMEM: introduce PHYS_OFFSET." Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Reorganize Cavium OCTEON PCI support.David Daney
Move the cavium PCI files to the arch/mips/pci directory. Also cleanup comment formatting and code layout. Code from pci-common.c, was moved into other files. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Allow suspend and hibernation again on uniprocessor kernels.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-07-03MIPS: 64-bit: Fix o32 core dumpYong Zhang
If an o32 process generates a core dump on a 64 bit kernel, the core file will not be correctly recognized. This is because ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS are not correctly defined for o32 and will use the default register set which would be CONFIG_64BIT in asm/elf.h. So we'll switch to use the right register defines in this situation by checking for WANT_COMPAT_REG_H and use the right defines of ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS. [Ralf: made ELF_CORE_COPY_TASK_REGS() bullet-proof against funny arguments.] Signed-off-by: Yong Zhang <yong.zhang@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: CMP: Update sync-r4k for current kernelTim Anderson
This revises the sync-4k so it will boot and operate since the removal of expirelo from the timer code. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: CMP: Move gcmp_probe to before the SMP opsTim Anderson
This is to move the gcmp_probe call to before the use of and selection of the smp_ops functions. This allows malta with 1004K to work. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: CMP: activate CMP supportTim Anderson
Most of the CMP support was added before, this mostly correct compile problems but adds a platform specific translation for the interrupt number based on cpu number. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: CMP: Extend IPI handling to CPU numberTim Anderson
This takes the current IPI interrupt assignment from the fix number of 4 to the number of CPUs defined in the system. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: CMP: Extend the GIC IPI interrupts beyond 32Tim Anderson
This patch extends the GIC interrupt handling beyond the current 32 bit range as well as extending the number of interrupts based on the number of CPUs. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Define __arch_swab64 for all mips r2 cpusDavid Daney
Some CPUs implement mipsr2, but because they are a super-set of mips64r2 do not define CONFIG_CPU_MIPS64_R2. Cavium OCTEON falls into this category. We would still like to use the optimized implementation, so since we have already checked for CONFIG_CPU_MIPSR2, checking for CONFIG_64BIT instead of CONFIG_CPU_MIPS64_R2 is sufficient. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open.David Daney
[Ralf: I fixed up the numbering in the comment in scall64-n32.S.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Malta: Remove unnecessary function prototypesDmitri Vorobiev
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: MT: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Add support for Texas Instruments AR7 System-on-a-ChipFlorian Fainelli
This patch adds support for the Texas Instruments AR7 System-on-a-Chip. It supports the TNETD7100, 7200 and 7300 versions of the SoC. Signed-off-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eugene Konev <ejka@openwrt.org> Signed-off-by: Nicolas Thill <nico@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Cavium: Add CPU hotplugging code.Ralf Baechle
Thanks to Cavium Inc. for the code contribution and help. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: SMP: Allow suspend and hibernation if CPU hotplug is availableRalf Baechle
The SMP implementation of suspend and hibernate depends on CPU hotplugging. In the past we didn't have CPU hotplug so suspend and hibernation were not possible on SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Add arch generic CPU hotplugRalf Baechle
Each platform has to add support for CPU hotplugging itself by providing suitable definitions for the cpu_disable and cpu_die of the smp_ops methods and setting SYS_SUPPORTS_HOTPLUG_CPU. A platform should only set SYS_SUPPORTS_HOTPLUG_CPU once all it's smp_ops definitions have the necessary changes. This patch contains the changes to the dummy smp_ops definition for uni-processor systems. Parts of the code contributed by Cavium Inc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined.Ralf Baechle
This fixes kernel.org bugzilla 13596, see http://bugzilla.kernel.org/show_bug.cgi?id=13596 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined.Ralf Baechle
This fixes kernel.org bugzilla 13595, see http://bugzilla.kernel.org/show_bug.cgi?id=13595 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Hibernation: Remove SMP TLB and cacheflushing code.Ralf Baechle
We can't perform any flushes on SMP from swsusp_arch_resume because interrupts are disabled. A cross-CPU flush is unnecessary anyway because all but the local CPU have already been disabled. A local flush is not needed either because we didn't change any mappings. So just delete the code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.Ralf Baechle
Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: bug.h Build fix - include <linux/compiler.h>.Ralf Baechle
In the past this file somehow used to be dragged in. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17Delete pcibios_select_rootMatthew Wilcox
This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17MIPS: Add hibernation supportWu Zhangjin
[Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't support. As implemented in this patch cache and tlb flushing will also be invoked with interrupts disabled so smp_call_function() will blow up in charming ways. So limit to !SMP.] Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Yan Hua <yanh@lemote.com> Reviewed-by: Arnaud Patard <apatard@mandriva.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.hDavid Daney
We had an ugly #ifdef for Cavium Octeon hwrena bits in traps.c, remove it to mach-cavium-octeon/cpu-feature-overrides.h Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.David Daney
Some CPUs have implementation dependent rdhwr registers. Allow them to be enabled on a per CPU basis. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.David Daney
Add new kconfig variables SYS_SUPPORTS_HUGETLBFS and CPU_SUPPORTS_HUGEPAGES. They are enabled for systems that are known to support huge pages. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: TLB support for hugetlbfs.David Daney
The TLB handlers need to check for huge pages and give them special handling. Huge pages consist of two contiguous sub-pages of physical memory. * Loading entrylo0 and entrylo1 need to be handled specially. * The page mask must be set for huge pages and then restored after writing the TLB entries. * The PTE for huge pages resides in the PMD, we halt traversal of the tables there. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add hugetlbfs page defines.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add support files for hugetlbfs.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Remove unused parameters from iPTE_LW.David Daney
The l parameter to iPTE_LW() is unused. Remove it and from some of its callers as well. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Export erratum function needed by octeon-ethernet driver.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Cavium-Octeon: Add more chip specific feature tests.David Daney
The octeon-ethernet driver needs to check for additional chip specific features, we add them to the octeon_has_feature() framework. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Cavium-Octeon: Add more board type constants.David Daney
The bootloader now uses additional board type constants. The octeon-ethernet driver needs some of the new values. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.David Daney
The various Octeon ethernet drivers use these new functions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: devboards: Convert to gpio calls.Manuel Lauss
Replace a few open-coded GPIO register accesses with gpio calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: xxs1500: use linux gpio api.Manuel Lauss
Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: MTX-1: Use linux gpio api.Manuel Lauss
Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: Rewrite GPIO support.Manuel Lauss
The current in-kernel Alchemy GPIO support is far too inflexible for all my use cases. To address this, the following changes are made: * create generic functions which deal with manipulating the on-chip GPIO1/2 blocks. Such functions are universally useful. * Macros for GPIO2 shared interrupt management and block control. * support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros. If CONFIG_GPIOLIB is not enabled, provide linux gpio framework compatibility by directly inlining the GPIO1/2 functions. GPIO access is limited to on-chip ones and they can be accessed as documented in the datasheets (GPIO0-31 and 200-215). If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and one for GPIO2, are registered. GPIOs can still be accessed by using the numberspace established in the databooks. However this is not yet flexible enough for my uses: My Alchemy systems have a documented "external" gpio interface (fixed, different numberspace) and can support a variety of baseboards, some of which are equipped with I2C gpio expanders. I want to be able to provide the default 16 GPIOs of the CPU board numbered as 0..15 and also support gpio expanders, if present, starting as gpio16. To achieve this, a new Kconfig symbol for Alchemy is introduced, CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal that they don't want the Alchemy numberspace exposed to the outside world, but instead want to provide their own. Boards are now respon- sible for providing the linux gpio interface glue code (either in a custom gpio.h header (in board include directory) or with gpio_chips). To make the board-specific inlined gpio functions work, the MIPS Makefile must be changed so that the mach-au1x00/gpio.h header is included _after_ the board headers, by moving the inclusion of the mach-au1x00/ to the end of the header list. See arch/mips/include/asm/mach-au1x00/gpio.h for more info. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Alchemy: Remove unused au1000_gpio.h headerManuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: BCM47xx: Fix gpio_direction_outputMatthieu Castet
gpio_direction_output should also set an output value according to the API. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: ioctl.h: Cleanup.Ralf Baechle
o Rewrite to use <asm-generic/ioctl.h>. Cuts down the file from 40 to 16 lines. o Delete _IOC_VOID, _IOC_OUT, _IOC_IN and _IOC_INOUT. They were added for 2.1.14 but I was not able to find any user - not even historical ones. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>