aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/ebony.dts
AgeCommit message (Collapse)Author
2008-05-29[POWERPC] Convert remaining dts-v0 files to v1David Gibson
At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially confusing to people new to the dts format attempting to figure it out. So, this patch converts all the as-yet unconverted dts v0 files and converts them to v1. They're mechanically-converted, and not hand tweaked so in some cases they're not 100% in keeping with usual v1 style, but the convertor program does have some heuristics so the discrepancies aren't too bad. I have checked that this patch produces no changes to the resulting dtb binaries. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26[POWERPC] Start removing linux,network-index in favour of aliasesDavid Gibson
This patch alters the bootwrapper for a number of machines (roubhly all 4xx based cuboot or treeboot platforms) to use aliases instead of the linux,network-index hack to work out which MAC address to attach to which ethernet device node. The now obsolete linux,network-index properties are removed from the corresponding device trees. This won't break backwards compatiblity, because in cases where this fixup code is relevant, the device tree is part of the kernel image. The references to linux,network-index are removed from booting-without-of.txt. Not only is it now deprecated, but as a hack applicable only when the device tree blob and fixup code were in the same image, this property never belonged in booting-without-of.txt which describes the interface between the kernel and firmware or bootloaders which produce a device tree. By the time the device tree reaches the kernel, all the MAC addresses must be fully filled in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15[POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dtsStefan Roese
Remove all "i2c" and "xxmii-interface" (rgmii etc) device_type entries from the 4xx dts files. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add aliases node to 4xx dts filesStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Rename CPU nodes to avoid dtc incompatibilityJosh Boyer
Recent DTC versions disallow certain special characters in full paths without being quoted with {}. That however breaks compatibility with older DTC versions. Work around this by renaming the CPU nodes for the 4xx files to a generic node name, and specify the processor type in the model property of the CPU node. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: PCI support for Ebony boardBenjamin Herrenschmidt
This wires up the 4xx PCI support & device tree bits for 440GP based Ebony platform. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-14[POWERPC] Document and implement an improved flash device binding for powerpcDavid Gibson
This replaces the binding for flash chips in booting-without-of.txt with an clarified and improved version. It also makes drivers/mtd/maps/physmap_of.c recognize this new binding. Finally it revises the Ebony device tree source to use the new binding as an example. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-07[POWERPC] Remove dtc build cruft from DTS filesJosh Boyer
The patch below removes the dtc incantation instructions from the in-kernel DTS files. It's not needed, and is prone to being out-of-date most of the time. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-17[POWERPC] Fixes to allow use of Ebony's flash chips through physmap_ofDavid Gibson
This patch contains a handful of small fixes to allow the Ebony's flash to be exposed as MTD devices via the physmap_of driver. Specifically it: - Makes a small addition to the device tree and zImage wrapper to record the correct address for the flash in the device tree based on the board switches as reported via an FPGA register. - Prohibits building the old hard-coded "Ebony" flash map on arch/powerpc kernels, in favour of using physmap_of's device tree based approach. - Enables MTD and physmap_of in the Ebony defconfig. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] Fix typo in Ebony default DTSLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Derive ebc ranges property from EBC registersDavid Gibson
In the device tree for Ebony, the 'ranges' property in the node for the EBC bridge shows the mappings from the chip select / address lines actually used for the EBC peripherals into the address space of the OPB. At present, these mappings are hardcoded in ebony.dts for the mappings set up by the OpenBIOS firmware when it configures the EBC bridge. This replaces the hardcoded mappings with code in the zImage to read the EBC configuration registers and create an appropriate ranges property based on them. This should make the zImage and kernel more robust to changes in firmware configuration. In particular, some of the Ebony's DIP switches can change the effective address of the Flash and other peripherals in OPB space. With this patch, the kernel will be able to cope with at least some of the possible variations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17[POWERPC] Small fixes for the Ebony device treeDavid Gibson
This patch corrects a number of minor errors in the Ebony device tree: - Missing (given as 0) cache sizes are added to the CPU node - device_type properties are removed from nodes which don't have a reasonably well defined device_type binding. This does require a very small code change to locate the busses to be probed for of_platform devices by 'compatible' instead of 'device_type'. - A node is added for the SRAM controller - The unit address of the small-flash node is adjusted to correctly reflect the reg property. - device_type values for the MAL and ZMII are updated to reflected more up-to-date versions of the binding. - An incorrect offset in the partition map for the large-flash node is corrected. - Some redundant values, already commented out are removed entirely. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Add device tree for EbonyDavid Gibson
Add a device tree for the Ebony evaluation board (440GP based). This tree is not complete or finalized. This tree needs a version of dtc recent enough to include reference-to-labels to process. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>