aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts
AgeCommit message (Collapse)Author
2007-10-04[POWERPC] mpc8568mds.dts: fix PCIe I/O address space location and sizeAnton Vorontsov
According to u-boot/board/mpc8568mds/init.S: LAW(Local Access Window) configuration: 2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB 4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] MPC8568E-MDS: add support for ds1374 rtcAnton Vorontsov
MPC8568E-MDS have DS1374 chip on the I2C bus, thus let's use it. This patch also adds #address-cells and #size-cells to the I2C controllers nodes. p.s. DS1374 rtc class driver is in the -mm tree, its name is rtc-rtc-class-driver-for-the-ds1374.patch. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] cpm: Describe multi-user ram in its own device node.Scott Wood
The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] bootwrapper: adds cuboot for MPC7448HPC2 platformRoy Zang
This patch adds cuboot support for MPC7448HPC2 platform. The cuImage can be used with legacy u-boot without FDT support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] mpc82xx: Add pq2fads board support.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] mpc82xx: Update mpc8272ads, and factor out PCI and reset.Scott Wood
1. PCI and reset are factored out into pq2.c. I renamed them from m82xx to pq2 because they won't work on the Integrated Host Processor line of 82xx chips (i.e. 8240, 8245, and such). 2. The PCI PIC, which is nominally board-specific, is used on multiple boards, and thus is used into pq2ads-pci-pic.c. 3. The new CPM binding is used. 4. General cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] 8xx/wrapper: Embedded Planet EP88xC supportScott Wood
This board is also resold by Freescale under the names "QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] 8xx: mpc885ads cleanupScott Wood
It now uses the new CPM binding and the generic pin/clock functions, and has assorted fixes and cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-28[POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode.jacmet@sunsite.dk
Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make much sense for the mini-AB connector on the ITX board. Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet properly support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-22[POWERPC] mpc8349: Add linux,network-index to ethernet nodes in device treeGrant Likely
cuImage needs to know the logical index of the ethernet devices in order to assign mac addresses. This adds the needed properties. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Gibson <david@gibson.dropbear.id.au> CC: Scott Wood <scottwood@freescale.com> CC: Kumar Gala <galak@kernel.crashing.org> CC: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-20[POWERPC] 4xx: Fix Sequoia MAL0 and EMAC dts entries.Valentine Barshak
According to PowerPC 440EPx documentation, MAL0 is comprised of four channels (two transmit and two receive). Each channel is dedicated to one of two EMAC cores. This patch fixes Sequoia DTS MAL0 entry and EMAC entries, assigning correct channel numbers to EMACs. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-20[POWERPC] 4xx: Fix Bamboo MAL0 dts entry.Valentine Barshak
According to PowerPC 440EP documentation, MAL0 consists of 6 channels (4 transmit channels and 2 receive channels) This patch fixes Bamboo DTS MAL0 "num-rx-chans" entry. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-19[POWERPC] 4xx: Convert Seqouia flash mappings to new bindingJosh Boyer
A new binding for flash devices was recently introduced. This updates the Sequoia DTS to use the new binding and enabled MTD in the defconfig. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Stefan Roese <sr@denx.de>
2007-09-19[POWERPC] 4xx: Convert Walnut flash mappings to new bindingJosh Boyer
A new binding for flash devices was recently introduced. This updates the Walnut DTS to use the new binding. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-14[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stubAnton Vorontsov
Enabled using SPI controller on the MPC832x RDB board. We currently use a modalias of "spidev" as a place holder (replace with "mmc_spie") until the mmc_spi driver support is merged in. This gets us the ability to test SPI until then. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Move PCI nodes to be sibilings with SOC nodesKumar Gala
Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] DTS cleanupKumar Gala
Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS portKumar Gala
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] linkstation updatesGuennadi Liakhovetski
1. Fix RTC type - it is a rs5c372a, not rs5c372b 2. Configure both UART interrupts edge-triggered 3. Add a license header to ls_uart.c 4. Check for running on linkstation in a late_initcall() function. Needed for multiplatform builds, even though linkstation doesn't support them yet 5. Remove unneeded #include from linkstation.c Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Document and implement an improved flash device binding for powerpcDavid Gibson
This replaces the binding for flash chips in booting-without-of.txt with an clarified and improved version. It also makes drivers/mtd/maps/physmap_of.c recognize this new binding. Finally it revises the Ebony device tree source to use the new binding as an example. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-07[POWERPC] Walnut DTSJosh Boyer
Device tree source file for the PPC405 Walnut evaluation board. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07[POWERPC] Remove dtc build cruft from DTS filesJosh Boyer
The patch below removes the dtc incantation instructions from the in-kernel DTS files. It's not needed, and is prone to being out-of-date most of the time. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07[POWERPC] PowerPC 440EPx: Sequoia device treeValentine Barshak
AMCC PPC440EPx Sequoia device tree. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-28Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-08-22[POWERPC] Whitespace cleanup in arch/powerpcScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-20[POWERPC] Bamboo DTSJosh Boyer
AMCC Bamboo board DTS Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fixes to allow use of Ebony's flash chips through physmap_ofDavid Gibson
This patch contains a handful of small fixes to allow the Ebony's flash to be exposed as MTD devices via the physmap_of driver. Specifically it: - Makes a small addition to the device tree and zImage wrapper to record the correct address for the flash in the device tree based on the board switches as reported via an FPGA register. - Prohibits building the old hard-coded "Ebony" flash map on arch/powerpc kernels, in favour of using physmap_of's device tree based approach. - Enables MTD and physmap_of in the Ebony defconfig. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-26Merge branch 'fixes-2.6.23' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2007-07-26[POWERPC] Fix RTC and device tree on linkstation machinesGuennadi Liakhovetski
This fixes the RTC on linkstation ppc machines again, and updates the device tree: add rtc nodes on i2c, remove bogus 0-size cache-line declarations, rename interrupt-controller nodes, remove erroneous interrupt-parent line, accidentally introduced by a recent patch. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boardsRoy Zang
Add global-utilities node with has-rstcr on MPC8544 DS and MPC8568 MDS boards so they are able to reset properly. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Fix mpc7448hpc2 tsi108 device_type bugRoy Zang
Fix mpc7448hpc2 tsi108 device_type bug. Wrong device type will break the board startup. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Fix ethernet PHY support on MPC8544 DSKumar Gala
The MPC8544 dts needed to set the new phy-connection-type to rgmii-id for the Vitesse PHY on the board to work properly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[WATCHDOG] mv64x60_wdt: Add arch/powerpc platform supportDale Farnsworth
Add support for arch/powerpc, specifically for the prpmc2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24[POWERPC] 85xxCDS: MPC8548 DTS cleanup.Randy Vinson
Added the P2P bridge present on the Arcadia base board and moved the VIA Southbridge behind the bridge to reflect its actual position in the bus organization. Added the RTC that's in the VIA Southbridge and expanded the ranges array for the SOC node to allow proper address translation of the RTC registers. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI node for mpc8568mds boardRoy Zang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Update PCI nodes in the 83xx/85xx boards device treeRoy Zang
Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add 8548 CDS PCI express controller node and PCI-X device nodeRoy Zang
Add 8548 CDS PCI express controller node and PCI-X device node. The current dts file is suitable for 8548 Rev 2.0 board with Arcadia 3.1. This kind of board combination is the most popular. Used the following compatible properties: PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xxZang Roy-r61911
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and PCIe on 85xx/86xx. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-18Add phy-connection-type to gianfar nodesAndy Fleming
The TSEC/eTSEC automatically detect their PHY interface type, unless the type is RGMII-ID (RGMII with internal delay). In that situation, it just detects RGMII. In order to fix this, we need to pass in rgmii-id if that is the connection type. Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-10[POWERPC] Fix typo in Ebony default DTSLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] dts: kill hardcoded phandlesVitaly Bordug
Removed explicit linux,phandle usage. Using references and labels now in PQ and PQ2 boards currently supported in arch/powerpc. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10[POWERPC] 8xx: mpc885ads pcmcia supportVitaly Bordug
Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as of_device, so only arch/powerpc stuff is capable to use it, which now implies only mpc885ads reference board. To cope with the code that should be hooked inside driver, but is really board specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds necessary function pointers that are filled in the BSP code. [akpm@linux-foundation.org: whitespace diddles] Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03[POWERPC] Fix up interrupt senses for MPC85xx boardsKumar Gala
The PHY is active-low on the MPC85xx CDS and the 8560 ADS just had the wrong sense for the internal PCI and CPM interrupts. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03[POWERPC] Reworked interrupt numbers for OpenPIC based Freescale chipsKumar Gala
Make the interrupt numbers match the OpenPIC spec intead of the Freescale docs which distinguish between internal and external interrupts. Now we can use the interrupt number directly to find the register offset associated with it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03[POWERPC] Fix MAC address entries for 83xx, 85xx, and 86xx device treesTimur Tabi
For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property to every Ethernet node that didn't have one. Add a comment indicating that the "address" and/or "mac-address" properties are deprecated in DTS files and will be removed at a later time. Change all MAC address properties to have a zero MAC address value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 06:52:35 +0000