aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/configs
AgeCommit message (Collapse)Author
2009-02-14powerpc/4xx: Add missing USB and i2c devices to CanyonlandsBenjamin Herrenschmidt
This adds the device-tree entries for a handful of devices on the Canyonlands board, such as the EHCI and OHCI controllers, the real time clock and the AD7414 thermal monitor. I also updated the defconfig to enable various options related to these devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-11powerpc/amigaone: Default config for AmigaOne boardsGerhard Pircher
CONFIG_CC_OPTIMIZE_FOR_SIZE is selected, because otherwise the kernel wouldn't boot. The AmigaOne's U-boot firmware seems to have a problem loading uImages bigger than 1.8 MB. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11Merge commit 'kumar/next' into nextBenjamin Herrenschmidt
2009-02-06powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boardsAnton Vorontsov
TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-29powerpc/5200: update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-01-28powerpc/86xx: Extend GE Fanuc GPIO driver for the SBC310Martyn Welch
This patch adds basic support for the 6 GPIO lines found on GE Fanucs SBC310 to the GE Fanuc GPIO driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28powerpc/86xx: Default configutation for GE Fanuc's SBC310Martyn Welch
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's SBC310, a 3U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28Merge commit 'jwb/jwb-merge' into mergeBenjamin Herrenschmidt
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
2009-01-28Merge commit 'kumar/kumar-merge' into mergeBenjamin Herrenschmidt
2009-01-26powerpc/embedded6xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/8xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/86xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/83xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/85xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-23powerpc/4xx: Update multi-board PowerPC 4xx defconfigsJosh Boyer
Update the multi-board configs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-23powerpc/44x: Update PowerPC 44x defconfigsJosh Boyer
Update the 44x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-20powerpc/40x: Update PowerPC 40x defconfigsJosh Boyer
Update the 40x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-13powerpc: Enable PS3 options and QPACE in ppc64_defconfigMichael Ellerman
To increase the amount of code that's built for a defconfig build. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-12[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610Martyn Welch
Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-30powerpc/85xx: Add SMP support to MPC8572 DSKumar Gala
Enable SMP support on the MPC8572 DS reference board. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-04powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigsAnton Vorontsov
This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-04powerpc/44x: update ppc44x_defconfigStephen Rothwell
This removes CONFIG_PCI_LEGACY (which is not needed) and consequently several compiler warnings. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04powerpc/kvm: update KVM config options in ppc44x_defconfigHollis Blanchard
KVM host support was recently enabled in ppc44x_defconfig, but since then the config option was renamed. Update ppc44x_defconfig to match. Also, KVM guests aren't very interesting without networking, so enable CONFIG_TUN and CONFIG_BRIDGE. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-03powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dtsMartyn Welch
Adding use of newly added Epson RTX-8581 real-time clock driver to GE Fanuc SBC610's dts file and adding driver to default config. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-24Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into mergePaul Mackerras
2008-11-19powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610Martyn Welch
The Marvell PHY driver is currently being used for the 88E1111 on the SBC610. This driver is causing the link to run in 10/Half mode, the generic PHY driver is correctly configuring the PHY as 1000/Full. Edit default config to use generic PHY driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-14powerpc/virtex: Update defconfigsGrant Likely
Update defconfigs for running on Xilinx Virtex platforms Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-14powerpc/52xx: update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-11powerpc: Update desktop/server defconfigsPaul Mackerras
Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-08powerpc: Updated Freescale PPC related defconfigsKumar Gala
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-31Merge branch 'merge' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
2008-10-30powerpc/44x: Update 44x defconfigsJosh Boyer
Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-30powerpc/40x: Update 40x defconfigsJosh Boyer
Update the PowerPC 40x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-28powerpc: enable heap randomization for linkstationsRogério Brito
The current defconfig for Linkstation/Kuroboxes has the "Disable Heap Randomization" option enabled. Since some of these machines are facing the internet, it helps to have heap randomization enabled. This patch enables it. Signed-off-by: Rogério Brito <rbrito@ime.usp.br> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-28powerpc: compile kernel for linkstations optimized for sizeRogério Brito
Since Linkstations and Kuroboxes often have *very* little memory (as they are embedded systems), it is desirable to get their kernels compiled optimized for size. Signed-off-by: Rogério Brito <rbrito@ime.usp.br> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-28powerpc: fix i2c on PPC linkstation / kurobox machinesGuennadi Liakhovetski
The i2c bus defn is broken on linkstation / kurobox machines since at least 2.6.27. Fix it. Also remove CONFIG_SERIAL_OF_PLATFORM, which, if enabled, breaks the serial console after the "console handover: boot [udbg0] -> real [ttyS1]" message. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-17powerpc/40x: Add support for Netstal HCU4 boardNiklaus Giger
Adds support for a HCU4 PPC405GPr based board from Netstal Maschinen AG. Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add PowerPC 405EZ Acadia defconfigJosh Boyer
Add simple defconfig for the AMCC PowerPC 405EZ Acadia evaluation board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-13powerpc: disable CHRP and PMAC support in various defconfigsTimur Tabi
Because CHRP and PMAC are by default enabled, several non-CHRP and non-PMAC PowerPC defconfigs will have these Kconfig options set erroneously. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-07powerpc: Remove CHRP and PMAC support from FSL defconfigsTimur Tabi
Fix various defconfigs for Freescale chip based boards to remove CONFIG_PPC_PMAC or CONFIG_PPC_CHRP which crept in due to those being default y Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-07Merge commit 'jwb/jwb-next'Benjamin Herrenschmidt
2008-10-02powerpc/44x: Add AMCC Arches defconfig fileVictor Gallardo
Add a defconfig for the AMCC Arches evaluation board Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-09-23powerpc/86xx: Introduce a generic mpc86xx_defconfigKumar Gala
Introduced a mpc86xx_defconfig that enables all 86xx boards and moved all other 86xx related defconfigs under configs/86xx to match 83xx and 85xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Default configuration for GE Fanuc SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc/83xx: mpc836x_mds: add support for the nor flashAnton Vorontsov
This patch adds the localbus node, moves the bcsr node into the localbus node, and adds the flash node. Also enable MTD support in the defconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Add support for mpc8247 based board MGCOGE from keymile.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Add support for the MPC852 based mgsuvd board from keymile.Heiko Schocher
Supported SMC1 (serial console), SCC3 Ethernet (10Mbps hdx). Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:03:09 +0000