aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/ptrace.c
AgeCommit message (Collapse)Author
2008-07-30powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regsMichael Neuling
In PTRACE_GET/SETVSRREGS, we should be using the thread we are ptracing rather than current. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-30powerpc: Fix ptrace buffer size for VSXMichael Neuling
Fix cut-and-paste error in the size setting for ptrace buffers for VSX. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make syscall tracing use tracehook.h helpersRoland McGrath
This changes powerpc syscall tracing to use the new tracehook.h entry points. There is no change, only cleanup. In addition, the assembly changes allow do_syscall_trace_enter() to abort the syscall without losing the information about the original r0 value. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/booke: Clean up the hardware watchpoint supportKumar Gala
* CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25powerpc: BookE hardware watchpoint supportLuis Machado
This patch implements support for HW based watchpoint via the DBSR_DAC (Data Address Compare) facility of the BookE processors. It does so by interfacing with the existing DABR breakpoint code and adding the necessary bits and pieces for the new bits to be properly set or cleared Signed-off-by: Luis Machado <luisgpm@br.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-01powerpc: Update for VSX core file and ptraceMichael Neuling
This correctly hooks the VSX dump into Roland McGrath core file infrastructure. It adds the VSX dump information as an additional elf note in the core file (after talking more to the tool chain/gdb guys). This also ensures the formats are consistent between signals, ptrace and core files. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add VSX context save/restore, ptrace and signal supportMichael Neuling
This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Introduce VSX thread_struct and CONFIG_VSXMichael Neuling
The layout of the new VSR registers and how they overlap on top of the legacy FPR and VR registers is: VSR doubleword 0 VSR doubleword 1 ---------------------------------------------------------------- VSR[0] | FPR[0] | | ---------------------------------------------------------------- VSR[1] | FPR[1] | | ---------------------------------------------------------------- | ... | | | ... | | ---------------------------------------------------------------- VSR[30] | FPR[30] | | ---------------------------------------------------------------- VSR[31] | FPR[31] | | ---------------------------------------------------------------- VSR[32] | VR[0] | ---------------------------------------------------------------- VSR[33] | VR[1] | ---------------------------------------------------------------- | ... | | ... | ---------------------------------------------------------------- VSR[62] | VR[30] | ---------------------------------------------------------------- VSR[63] | VR[31] | ---------------------------------------------------------------- VSX has 64 128bit registers. The first 32 regs overlap with the FP registers and hence extend them with and additional 64 bits. The second 32 regs overlap with the VMX registers. This commit introduces the thread_struct changes required to reflect this register layout. Ptrace and signals code is updated so that the floating point registers are correctly accessed from the thread_struct when CONFIG_VSX is enabled. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add macros to access floating point registers in thread_struct.Michael Neuling
We are going to change where the floating point registers are stored in the thread_struct, so in preparation add some macros to access the floating point registers. Update all code to use these new macros. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] user_regset PTRACE_SETREGS regression fixRoland McGrath
The PTRACE_SETREGS request was only recently added on powerpc, and gdb does not use it. So it slipped through without getting all the testing it should have had. The user_regset changes had a simple bug in storing to all of the 32-bit general registers block on 64-bit kernels. This bug only comes up with PTRACE_SETREGS, not PPC_PTRACE_SETREGS. It causes a BUG_ON to hit, so this fix needs to go in ASAP. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Add SPE registers to core dumpsRoland McGrath
This makes the SPE register data appear in ELF core dumps, using the new n_type value NT_PPC_SPE (0x101). This new note type is not used by any consumers of core files yet, but support can be added. I don't even have any hardware with SPE capabilities, so I've never seen such a note. But this demonstrates how simple it is to export register information in core dumps when the user_regset style is used for the low-level code. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use generic ptrace peekdata/pokedataRoland McGrath
Now that ptrace_request handles these, we can drop some more boilerplate. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use regset code for PTRACE_*REGS* requestsRoland McGrath
This replaces all the code for powerpc PTRACE_*REGS* requests with simple calls to copy_regset_from_user and copy_regset_to_user. All the ptrace formats are either the whole corresponding user_regset format (core dump format) or a leading subset of it, so we can get rid of all the remaining embedded knowledge of both those layouts and of the internal data structures they correspond to. Only the user_regset accessors need to implement that. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Add user_regset compat supportRoland McGrath
This extends task_user_regset_view CONFIG_PPC64 with support for the 32-bit view of register state, compatible with what a CONFIG_PPC32 kernel provides. This will enable generic machine-independent code to access user-mode threads' registers for debugging and dumping. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Add user_regset_view definitionsRoland McGrath
This provides the task_user_regset_view entry point and support for all the native-mode (64 on CONFIG_PPC64, 32 on CONFIG_PPC32) thread register state. This will enable generic machine-independent code to access user-mode threads' registers for debugging and dumping. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use user_regset accessors for GPRsRoland McGrath
This implements user_regset-style accessors for the powerpc general registers. In the future these functions will be the only place that needs to understand the user_regset layout (core dump format) and how it maps to the internal representation of user thread state. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] ptrace accessors for special regs MSR and TRAPRoland McGrath
This isolates the ptrace code for the special-case registers msr and trap from the ptrace-layout dispatch code. This should inline away completely. It cleanly separates the low-level machine magic that has to be done for deep reasons, from the superficial details of the ptrace interface. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use user_regset accessors for SPE regsRoland McGrath
This implements user_regset-style accessors for the powerpc SPE data, and rewrites the existing ptrace code in terms of those calls. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use user_regset accessors for altivec regsRoland McGrath
This implements user_regset-style accessors for the powerpc Altivec data, and rewrites the existing ptrace code in terms of those calls. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Use user_regset accessors for FP regsRoland McGrath
This implements user_regset-style accessors for the powerpc FPU data, and rewrites the existing ptrace code in terms of those calls. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-30powerpc: ptrace generic resumeRoland McGrath
This removes the handling for PTRACE_CONT et al from the powerpc ptrace code, so it uses the new generic code via ptrace_request. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30powerpc: arch_has_single_stepRoland McGrath
This defines the new standard arch_has_single_step macro. It makes the existing set_single_step and clear_single_step entry points global, and renames them to the new standard names user_enable_single_step and user_disable_single_step, respectively. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-16Consolidate PTRACE_DETACHAlexey Dobriyan
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-03[POWERPC] Add CHECK_FULL_REGS in several places in ptrace codeRoland McGrath
This restores the CHECK_FULL_REGS sanity check to every place that can access the nonvolatile GPRs for ptrace. This is already done for native-bitwidth PTRACE_PEEKUSR, but was omitted for many other cases (32-bit ptrace, PTRACE_GETREGS, etc.); I think there may have been more uniform checks before that were lost in the recent cleanup of GETREGS et al. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add cpu feature for SPE handlingKumar Gala
Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-17PTRACE_POKEDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata() function. AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless return EPERM. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17PTRACE_PEEKDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata() function. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-14[POWERPC] powerpc: ptrace can set DABR on both 32 and 64 bitsBenjamin Herrenschmidt
Allow ptrace to set dabr in the thread structure for both 32 and 64 bits, though only 64 bits actually uses that field, it's actually defined in both. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] ptrace shouldn't touch FP exec modeBenjamin Herrenschmidt
One of the gratuitous difference between 32 and 64-bit ptrace is whether you can whack the MSR:FE0 and FE1 bits from ptrace. This patch forbids it unconditionally. In addition, the 64-bit kernels used to return the exception mode in the MSR on reads, but 32-bit kernels didn't. This patch makes it return those bits on both. Finally, since ptrace-ppc32.h and ptrace-ppc64.h are mostly empty now, and since the previous patch made ptrace32.c no longer need the MSR_DEBUGCHANGE definition, we just remove those 2 files and move back the remaining bits to ptrace.c (they were short lived heh ?). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Allow ptrace write to pt_regs trap and orig_r3Benjamin Herrenschmidt
This patch allows a ptracer to write to the "trap" and "orig_r3" words of the pt_regs. This, along with a subsequent patch to the signal restart code, should enable gdb to properly handle syscall restarting after executing a separate function (at least when there's no restart block). This patch also removes ptrace32.c code toying directly with the registers and makes it use the ptrace_get/put_reg() accessors for everything so that the logic for checking what is permitted is in only one place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Remove some useless ifdef's in ptraceBenjamin Herrenschmidt
CHECK_FULL_REGS() exist on both 32 and 64 bits, so there's no need to make it conditional on CONFIG_PPC32. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Uninline common ptrace bitsBenjamin Herrenschmidt
This folds back the ptrace-common.h bits back into ptrace.c and removes that file. The FSL SPE bits from ptrace-ppc32.h are folded back in as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] ptrace updates & new, better requestsBenjamin Herrenschmidt
The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] ptrace cleanupsBenjamin Herrenschmidt
The powerpc ptrace code has some weirdness, like a ptrace-common.h file that is actually ppc64 only and some of the 32 bits code ifdef'ed inside ptrace.c. There are also separate implementations for things like get/set_vrregs for 32 and 64 bits which is totally unnecessary. This patch cleans that up a bit by having a ptrace-common.h which contains really common code (and makes a lot more code common), and ptrace-ppc32.h and ptrace-ppc64.h files that contain the few remaining different bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Disable broken PPC_PTRACE_GETFPREGS on 32 bitsBenjamin Herrenschmidt
The handling of PPC_PTRACE_GETFPREGS is broken on 32 bits kernel, it will only return half of the registers. Since that call didn't initially exist for 32 bits kernel (added recently), rather than fixing it, let's just remove it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02[POWERPC] Fix ppc32 single-stepping out of syscallsBenjamin Herrenschmidt
The ppc32 kernel didn't properly set/clear the TIF_SINGLESTEP flag, causing return from syscalls to not SIGTRAP, thus executing one more instruction before stopping again. This fixes it. The ptrace code is a bit of a mess, and is overdue for at least a -proper- 32/64 bits split and possibly more cleanups but this minimum fix should be ok for 2.6.22 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-24[POWERPC] Mask 32-bit system call arguments to 32 bits on PPC64 in audit codeDavid Woodhouse
The system call entry code will clear the high bits of argument registers before invoking the system call; don't report whatever noise happens to be in the high bits of the register before that happens. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] Fix PPC32 SECCOMP, unexport do_syscall_trace_{enter,leave}David Woodhouse
The secure_computing() call which automatically aborts a process if it tries to execute a syscall it shouldn't is much more useful if we actually do it _before_ the syscall, rather than afterwards. PPC64 got this right, but the original incorrect behaviour inherited from arch/ppc was preserved by ifdefs. Make it the same on PPC32 too. Also, I see no need to export do_syscall_trace_{leave,enter} on ppc32 -- they were only exported because the old do_syscall_trace() (which they replaced) used to be. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] Fix audit syscall success/failure reporting on PowerPCDavid Woodhouse
Due to my stupidity, we were checking for the wrong bit in CCR when attempting to determine whether a syscall succeeded or not. Remedy the symptom, if not the cause. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-09[PATCH] powerpc: enable PPC_PTRACE_[GS]ETREGS on ppc32Renzo Davoli
I have tested PPC_PTRACE_GETREGS and PPC_PTRACE_SETREGS on umview. I do not understand why historically these tags has been defined as PPC_PTRACE_GETREGS and PPC_PTRACE_SETREGS instead of simply PTRACE_[GS]ETREGS. The other "originality" is that the address must be put into the "addr" field instead of the "data" field as stated in the manual. Signed-off-by: renzo davoli <renzo@cs.unibo.it> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-01[PATCH] drop task argument of audit_syscall_{entry,exit}Al Viro
... it's always current, and that's a good thing - allows simpler locking. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-08powerpc: Fix various syscall/signal/swapcontext bugsPaul Mackerras
A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-19powerpc: move include/asm-ppc64/ptrace-common.h to arch/powerpc/kernelPaul Mackerras
It's only used by arch/powerpc/kernel/ptrace{,32}.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07[PATCH] consolidate sys_ptrace()Christoph Hellwig
The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31powerpc: apply recent changes to merged codePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpcPaul Mackerras
Also corrected my email address in ptrace.c and updated the comments at the top of ptrace32.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-13powerpc: merge ptrace.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>