aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/smp.c
AgeCommit message (Collapse)Author
2008-05-14[POWERPC] Fix sparse warnings in arch/powerpc/kernelMichael Ellerman
Make a few things static in lparcfg.c Make init and exit routines static in rtas_flash.c Make things static in rtas_pci.c Make some functions static in rtas.c Make fops static in rtas-proc.c Remove unneeded extern for do_gtod in smp.c Make clocksource_init() static in time.c Make last_tick_len and ticklen_to_xs static in time.c Move the declaration of the pvr per-cpu into smp.h Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c Don't return void in arch_teardown_msi_irqs() in msi.c Move declaration of GregorianDay()into asm/time.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02[POWERPC] Bolt in SLB entry for kernel stack on secondary cpusPaul Mackerras
This fixes a regression reported by Kamalesh Bulabel where a POWER4 machine would crash because of an SLB miss at a point where the SLB miss exception was unrecoverable. This regression is tracked at: http://bugzilla.kernel.org/show_bug.cgi?id=10082 SLB misses at such points shouldn't happen because the kernel stack is the only memory accessed other than things in the first segment of the linear mapping (which is mapped at all times by entry 0 of the SLB). The context switch code ensures that SLB entry 2 covers the kernel stack, if it is not already covered by entry 0. None of entries 0 to 2 are ever replaced by the SLB miss handler. Where this went wrong is that the context switch code assumes it doesn't have to write to SLB entry 2 if the new kernel stack is in the same segment as the old kernel stack, since entry 2 should already be correct. However, when we start up a secondary cpu, it calls slb_initialize, which doesn't set up entry 2. This is correct for the boot cpu, where we will be using a stack in the kernel BSS at this point (i.e. init_thread_union), but not necessarily for secondary cpus, whose initial stack can be allocated anywhere. This doesn't cause any immediate problem since the SLB miss handler will just create an SLB entry somewhere else to cover the initial stack. In fact it's possible for the cpu to go quite a long time without SLB entry 2 being valid. Eventually, though, the entry created by the SLB miss handler will get overwritten by some other entry, and if the next access to the stack is at an unrecoverable point, we get the crash. This fixes the problem by making slb_initialize create a suitable entry for the kernel stack, if we are on a secondary cpu and the stack isn't covered by SLB entry 0. This requires initializing the get_paca()->kstack field earlier, so I do that in smp_create_idle where the current field is initialized. This also abstracts a bit of the computation that mk_esid_data in slb.c does so that it can be used in slb_initialize. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make smp_send_stop() handle panic and xmon rebootOlof Johansson
smp_send_stop() will send an IPI to all other cpus to shut them down. However, for the case of xmon-based reboots (as well as potentially some panics), the other cpus are (or might be) spinning with interrupts off, and won't take the IPI. Current code will drop us into the debugger when the IPI fails, which means we're in an infinite loop that we can't get out of without an external reset of some sort. Instead, make the smp_send_stop() IPI call path just print the warning about being unable to send IPIs, but make it return so the rest of the shutdown sequence can continue. It's not perfect, but the lesser of two evils. Also move the call_lock handling outside of smp_call_function_map so we can avoid deadlocks in smp_send_stop(). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make smp_call_function_map staticOlof Johansson
smp_call_function_map should be static, and for consistency prepend it with __ like other local helper functions in the same file. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-03[POWERPC] Implement clockevents driver for powerpcTony Breeds
This registers a clock event structure for the decrementer and turns on CONFIG_GENERIC_CLOCKEVENTS, which means that we now don't need most of timer_interrupt(), since the work is done in generic code. For secondary CPUs, their decrementer clockevent is registered when the CPU comes up (the generic code automatically removes the clockevent when the CPU goes down). Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22[POWERPC] Avoid pointless WARN_ON(irqs_disabled()) from panic codepathSatyam Sharma
> ------------[ cut here ]------------ > Badness at arch/powerpc/kernel/smp.c:202 comes when smp_call_function_map() has been called with irqs disabled, which is illegal. However, there is a special case, the panic() codepath, when we do not want to warn about this -- warning at that time is pointless anyway, and only serves to scroll away the *real* cause of the panic and distracts from the real bug. * So let's extract the WARN_ON() from smp_call_function_map() into all its callers -- smp_call_function() and smp_call_function_single() * Also, introduce another caller of smp_call_function_map(), namely __smp_call_function() (and make smp_call_function() a wrapper over this) which does *not* warn about disabled irqs * Use this __smp_call_function() from the panic codepath's smp_send_stop() We also end having to move code of smp_send_stop() below the definition of __smp_call_function(). Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix num_cpus calculation in smp_call_function_map()Kevin Corry
In smp_call_function_map(), num_cpus is set to the number of online CPUs minus one. However, if the CPU mask does not include all CPUs (except the one we're running on), the routine will hang in the first while() loop until the 8 second timeout occurs. The num_cpus should be set to the number of CPUs specified in the mask passed into the routine, after we've made any modifications to the mask. With this change, we can also get rid of the call to cpus_empty() and avoid adding another pass through the bitmask. Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22[POWERPC] Allow smp_call_function_single() to current cpuAvi Kivity
This removes the requirement for callers to get_cpu() to check in simple cases. i386 and x86_64 already received a similar treatment. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-22[POWERPC] Fix smp_call_function to be preempt-safeHugh Dickins
smp_call_function_map() was not safe against preemption to another cpu: its test for removing self from map was outside the spinlock. Rearrange it a little to fix that. smp_call_function_single() was also wrong: now get_cpu() before excluding self, as other architectures do. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Add smp_call_function_map and smp_call_function_singlewill schmidt
Add a new function named smp_call_function_single(). This matches a generic prototype from include/linux/smp.h. Add a function smp_call_function_map(). This is, for the most part, a rename of smp_call_function, with some added cpumask support. smp_call_function and smp_call_function_single call into smp_call_function_map. Lightly tested on 970mp (blade), power4 and power5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Make tlb flush batch use lazy MMU modeBenjamin Herrenschmidt
The current tlb flush code on powerpc 64 bits has a subtle race since we lost the page table lock due to the possible faulting in of new PTEs after a previous one has been removed but before the corresponding hash entry has been evicted, which can leads to all sort of fatal problems. This patch reworks the batch code completely. It doesn't use the mmu_gather stuff anymore. Instead, we use the lazy mmu hooks that were added by the paravirt code. They have the nice property that the enter/leave lazy mmu mode pair is always fully contained by the PTE lock for a given range of PTEs. Thus we can guarantee that all batches are flushed on a given CPU before it drops that lock. We also generalize batching for any PTE update that require a flush. Batching is now enabled on a CPU by arch_enter_lazy_mmu_mode() and disabled by arch_leave_lazy_mmu_mode(). The code epects that this is always contained within a PTE lock section so no preemption can happen and no PTE insertion in that range from another CPU. When batching is enabled on a CPU, every PTE updates that need a hash flush will use the batch for that flush. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14[POWERPC] Move MPIC smp routines into mpic.cMichael Ellerman
Move a couple of MPIC smp routines into mpic.c, they're inside an SMP block in mpic.c - so they're still only built for SMP. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-11[PATCH] Change cpu_up and co from __devinit to __cpuinitGautham R Shenoy
Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n with CONFIG_RELOCATABLE = y generates the following modpost warnings WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up' This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are defined as __devinit AND __cpu_up calls some __cpuinit functions. Since __cpuinit would map to __init with this kind of a configuration, we get a .text refering .init.data warning. This patch solves the problem by converting all of __cpu_up, _cpu_up and cpu_up from __devinit to __cpuinit. The approach is justified since the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or are of __init type. Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would land up in .init section. Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-25[POWERPC] cell: add cpufreq driver for Cell BE processorChristian Krafft
This patch adds a cpufreq backend driver to enable frequency scaling on cell. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-26[POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP setBenjamin Herrenschmidt
Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-21[POWERPC] Add starting of secondary 86xx CPUs.Jon Loeliger
Clear the high BATS during load_up_mmu if FTR_HAS_HIGH_BATS. Allow just a bit more time for secondary CPUs to phone home. Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29[PATCH] for_each_possible_cpu: powerpcKAMEZAWA Hiroyuki
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24powerpc: Implement accurate task and CPU time accountingPaul Mackerras
This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: avoid timer interrupt replay effect when onlining cpuNathan Lynch
When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to something sane, timer_interrupt will execute its while loop for every tick missed since the cpu was last online (or since the system was booted, if we're adding a new cpu). This can cause weird hangs, ssh sessions dropping, and we can even go xmon if we take a global IPI at the wrong time. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: task_thread_info()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] ppc64: Add NUMA cpu summary at bootAnton Blanchard
We used to print a NUMA cpu summary at boot before the hotplug cpu code was added. This has been useful for catching machine configuration as well as firmware bugs in the past. This patch restores that functionality. An example of the output is: Node 0 CPUs: 0-7 Node 1 CPUs: 8-15 Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Add arch dependent basic infrastructure for Kdump.Michael Ellerman
Implementing the machine_crash_shutdown which will be called by crash_kexec (called in case of a panic, sysrq etc.). Disable the interrupts, shootdown cpus using debugger IPI and collect regs for all CPUs. elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. savemaxmem= specifies the actual memory size that the first kernel has and this value will be used for dumping in the capture kernel. This command line option will be passed by the kexec-tools to capture kernel. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Remove some unneeded fields from the pacaDavid Gibson
This patch removes several unnecessary fields from the paca: - next_jiffy_update_tb was simply unused. Remove trivially. - The exdsi exception save area was not used. There were plans to use it, but they never seem to have gone anywhere. If they ever do, we can put it back. Remove from the paca, and from asm-offsets.c - The default_decr field was used from asm, but was only ever assigned the value of tb_ticks_per_jiffy. Just access tb_ticks_per_jiffy from asm directly instead. Built and booted on POWER5 LPAR and iSeries RS64. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16[PATCH] powerpc: More debugging fixupsMichael Ellerman
Add a few more missing includes of udbg.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernelBenjamin Herrenschmidt
This patch moves the vdso's to arch/powerpc, adds support for the 32 bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds some new (still untested) routines to both vdso's: clock_gettime() with support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same clocks) and get_tbfreq() for glibc to retreive the timebase frequency. Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits returns a long long (r3, r4) not a long. This is such that if we ever add support for >4Ghz timebases on ppc32, the userland interface won't have to change. I have tested gettimeofday() using some glibc patches in both ppc32 and ppc64 kernels using 32 bits userland (I haven't had a chance to test a 64 bits userland yet, but the implementation didn't change and was tested earlier). I haven't tested yet the new functions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-10powerpc: Fixes for 32-bit powermac SMPPaul Mackerras
A couple of bugs crept in with the merge of smp.c... Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: merge code values for identifying platformsPaul Mackerras
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09[PATCH] powerpc: sched fixupsAndrew Morton
- Re-add a hunk lost during merge: ppc64 is missing the hunk that disables preempt on the secondary CPUs before they call cpu_idle(). - ppc's cpu_idle() had the need_resched() test wrong. Cc: Nick Piggin <nickpiggin@yahoo.com.au> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08[PATCH] ppc64: remove some direct xmon callsAnton Blanchard
Even though we can enable and disable xmon at runtime now, there are a few places in the merge tree that call xmon and xmon_printf directly. In the case below we call die() which will call xmon if it is enabled. Also remove an unnecessary include of xmon.h in smp.c. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-05powerpc: Merge smp.c and smp.hPaul Mackerras
This also moves setup_cpu_maps to setup-common.c (calling it smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>