aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/lib
AgeCommit message (Collapse)Author
2008-07-03powerpc: Fixup lwsync at runtimeKumar Gala
To allow for a single kernel image on e500 v1/v2/mc we need to fixup lwsync at runtime. On e500v1/v2 lwsync causes an illop so we need to patch up the code. We default to 'sync' since that is always safe and if the cpu is capable we will replace 'sync' with 'lwsync'. We introduce CPU_FTR_LWSYNC as a way to determine at runtime if this is needed. This flag could be moved elsewhere since we dont really use it for the normal CPU_FTR purpose. Finally we only store the relative offset in the fixup section to keep it as small as possible rather than using a full fixup_entry. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-03powerpc: Fix building of feature-fixup tests on ppc32Kumar Gala
We need to use PPC_LCMPI otherwise we get compile errors like: arch/powerpc/lib/feature-fixups-test.S: Assembler messages: arch/powerpc/lib/feature-fixups-test.S:142: Error: Unrecognized opcode: `cmpdi' arch/powerpc/lib/feature-fixups-test.S:149: Error: Unrecognized opcode: `cmpdi' arch/powerpc/lib/feature-fixups-test.S:164: Error: Unrecognized opcode: `cmpdi' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Prevent memory corruption due to cache invalidation of unaligned ↵Andrew Lewis
DMA buffer On PowerPC processors with non-coherent cache architectures the DMA subsystem calls invalidate_dcache_range() before performing a DMA read operation. If the address and length of the DMA buffer are not aligned to a cache-line boundary this can result in memory outside of the DMA buffer being invalidated in the cache. If this memory has an uncommitted store then the data will be lost and a subsequent read of that address will result in an old value being returned from main memory. Only when the DMA buffer starts on a cache-line boundary and is an exact mutiple of the cache-line size can invalidate_dcache_range() be called, otherwise flush_dcache_range() must be called. flush_dcache_range() will first flush uncommitted writes, and then invalidate the cache. Signed-off-by: Andrew Lewis <andrew-lewis at netspace.net.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add self-tests of the feature fixup codeMichael Ellerman
This commit adds tests of the feature fixup code, they are run during boot if CONFIG_FTR_FIXUP_SELFTEST=y. Some of the tests manually invoke the patching routines to check their behaviour, and others use the macros and so are patched during the normal patching done during boot. Because we have two sets of macros with different names, we use a macro to generate the test of the macros, very niiiice. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add logic to patch alternative feature sectionsMichael Ellerman
This commit adds the logic to patch alternative sections. This is fairly straightforward, except for branches. Relative branches that jump from inside the else section to outside of it need to be translated as they're moved, otherwise they will jump to the wrong location. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Introduce infrastructure for feature sections with alternativesMichael Ellerman
The current feature section logic only supports nop'ing out code, this means if you want to choose at runtime between instruction sequences, one or both cases will have to execute the nop'ed out contents of the other section, eg: BEGIN_FTR_SECTION or 1,1,1 END_FTR_SECTION_IFSET(FOO) BEGIN_FTR_SECTION or 2,2,2 END_FTR_SECTION_IFCLR(FOO) and the resulting code will be either, or 1,1,1 nop or, nop or 2,2,2 For small code segments this is fine, but for larger code blocks and in performance criticial code segments, it would be nice to avoid the nops. This commit starts to implement logic to allow the following: BEGIN_FTR_SECTION or 1,1,1 FTR_SECTION_ELSE or 2,2,2 ALT_FTR_SECTION_END_IFSET(FOO) and the resulting code will be: or 1,1,1 or, or 2,2,2 We achieve this by extending the existing FTR macros. The current feature section semantic just becomes a special case, ie. if the else case is empty we nop out the default case. The key limitation is that the size of the else case must be less than or equal to the size of the default case. If the else case is smaller the remainder of the section is nop'ed. We let the linker put the else case code in with the rest of the text, so that relative branches from the else case are more likley to link, this has the disadvantage that we can't free the unused else cases. This commit introduces the required macro and linker script changes, but does not enable the patching of the alternative sections. We also need to update two hand-made section entries in reg.h and timex.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Split out do_feature_fixups() from cputable.cMichael Ellerman
The logic to patch CPU feature sections lives in cputable.c, but these days it's used for CPU features as well as firmware features. Move it into it's own file for neatness and as preparation for some additions. While we're moving the code, we pull the loop body logic into a separate routine, and remove a comment which doesn't apply anymore. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add tests of the code patching routinesMichael Ellerman
Add tests of the existing code patching routines, as well as the new routines added in the last commit. The self-tests are run late in boot when CONFIG_CODE_PATCHING_SELFTEST=y, which depends on DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add new code patching routinesMichael Ellerman
This commit adds some new routines for patching code, which will be used in a following commit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Make create_branch() return errors if the branch target is too largeMichael Ellerman
If you pass a target value to create_branch() which is more than 32MB - 4, or - 32MB away from the branch site, then it's impossible to create an immediate branch. The current code doesn't check, which will lead to us creating a branch to somewhere else - which is bad. For code that cares to check we return 0, which is easy to check for, and for code that doesn't at least we'll be creating an illegal instruction, rather than a branch to some random address. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Allow create_branch() to return errorsMichael Ellerman
Currently create_branch() creates a branch instruction for you, and patches it into the call site. In some circumstances it would be nice to be able to create the instruction and patch it later, and also some code might want to check for errors in the branch creation before doing the patching. A future commit will change create_branch() to check for errors. For callers that don't care, replace create_branch() with patch_branch(), which just creates the branch and patches it directly. While we're touching all the callers, change to using unsigned int *, as this seems to match usage better. That allows (and requires) us to remove the volatile in the definition of vector in powermac/smp.c and mpc86xx_smp.c, that's correct because now that we're passing vector as an unsigned int * the compiler knows that it's value might change across the patch_branch() call. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Move code patching code into arch/powerpc/lib/code-patching.cMichael Ellerman
We currently have a few routines for patching code in asm/system.h, because they didn't fit anywhere else. I'd like to clean them up a little and add some more, so first move them into a dedicated C file - they don't need to be inlined. While we're moving the code, drop create_function_call(), it's intended caller never got merged and will be replaced in future with something different. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16[POWERPC] Fix -Os kernel builds with newer gcc versionsKumar Gala
GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix this we add the use the save/restore code from gcc and simplified it down for our needs (integer only). Additionally, we have to link this code into each module. The other solution was to add EXPORT_SYMBOL() which meant going through the trampoline which seemed nonsensical for these out-of-line routines. Finally, we add some checks to prom_init_check.sh to ignore the out-of-line save/restore functions. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-12[POWERPC] ppc: More compile fixesPaul Mackerras
This fixes a few more miscellaneous compile problems with ARCH=ppc. 1. Don't compile devres.c on ARCH=ppc, it doesn't have ioremap_flags. 2. Include <asm/irq.h> in setup.c for the __DO_IRQ_CANON definition. 3. Include <linux/proc_fs.h> in residual.c for the definition of create_proc_read_entry. 4. Fix xchg_ptr to be a static inline to eliminate a compiler warning. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05[POWERPC] devres: Add devm_ioremap_prot()Emil Medve
We provide an ioremap_flags, so this provides a corresponding devm_ioremap_prot. The slight name difference is at Ben Herrenschmidt's request as he plans on changing ioremap_flags to ioremap_prot in the future. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] Make rheap safe for spinlocksTimur Tabi
The rheap allocation function, rh_alloc, could call kmalloc with GFP_KERNEL. This can sleep, which means you couldn't hold a spinlock while called rh_alloc. Change all kmalloc calls to use GFP_ATOMIC so that it won't sleep. This is safe because only small blocks are allocated. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-07[POWERPC] Add hand-coded assembly strcmpSteven Rostedt
We have an assembly version of strncmp for the bootwrapper, but not for the kernel, so we end up using the C version in the kernel. This takes the strncmp code from the bootup and copies it to the kernel proper, adding two instructions so it copes correctly with len==0. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16[POWERPC] rheap: Changes config mechanismSylvain Munaut
Instead of having in the makefile all the option that requires rheap, we define a configuration symbol and when needed we make sure it's selected. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-16[POWERPC] exports rheap symbol to modulesSylvain Munaut
Theses can be useful in modules too. So we export them. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-03[POWERPC] Limit range of __init_ref_ok somewhatStephen Rothwell
This patch introduces zalloc_maybe_bootmem and uses it so that we don't have to mark a whole (largish) routine as __init_ref_ok. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Create and use CONFIG_WORD_SIZEStephen Rothwell
Linus made this suggestion for the x86 merge and this starts the process for powerpc. We assume that CONFIG_PPC64 implies CONFIG_PPC_MERGE and CONFIG_PPC_STD_MMU_32 implies CONFIG_PPC_STD_MMU. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] Fix section mismatch in PCI codeStephen Rothwell
Create a helper function (alloc_maybe_bootmem) that is marked __init_refok to limit the chances of mistakenly referring to other __init routines. WARNING: vmlinux.o(.text+0x2a9c4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.update_dn_pci_info' and '.pci_dn_reconfig_notifier') WARNING: vmlinux.o(.text+0x36430): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.mpic_msi_init_allocator' and '.find_ht_magic_addr') WARNING: vmlinux.o(.text+0x5e804): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') WARNING: vmlinux.o(.text+0x5e8e8): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') WARNING: vmlinux.o(.text+0x5e968): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-29Remove fs.h from mm.hAlexey Dobriyan
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-19[POWERPC] rheap - eliminates internal fragments caused by alignmentLi Yang
The patch adds fragments caused by rh_alloc_align() back to free list, instead of allocating the whole chunk of memory. This will greatly improve memory utilization managed by rheap. It solves MURAM not enough problem with 3 UCCs enabled on MPC8323. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-17[POWERPC] Fix alignment problem in rh_alloc_align() with exact-sized blocksTimur Tabi
When an rheap is created, the caller can specify the alignment to use. In rh_alloc_align(), if a free block is found that is the exact size needed (including extra space for alignment), that configured alignment value is not used to align the pointer. Instead, the default alignment is used. If the default alignment is smaller than the configured alignment, then the returned value will not be aligned correctly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09[POWERPC] User rheap from arch/powerpc/libKumar Gala
Removed rheap in arch/ppc/lib and changed build system to use the one in arch/powerpc/lib. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09[POWERPC] Change rheap functions to use ulongs instead of pointersTimur Tabi
The rheap allocation functions return a pointer, but the actual value is based on how the heap was initialized, and so it can be anything, e.g. an offset into a buffer. A ulong is a better representation of the value returned by the allocation functions. This patch changes all of the relevant rheap functions to use a unsigned long integers instead of a pointer. In case of an error, the value returned is a negative error code that has been cast to an unsigned long. The caller can use the IS_ERR_VALUE() macro to check for this. All code which calls the rheap functions is updated accordingly. Macros IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE(). Also added error checking to rh_attach_region(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-08[POWERPC] Remove use of 4level-fixup.h for ppc32David Gibson
For 32-bit systems, powerpc still relies on the 4level-fixup.h hack, to pretend that the generic pagetable handling stuff is 3-levels rather than 4. This patch removes this, instead using the newer pgtable-nopmd.h to handle the elision of both the pud and pmd pagetable levels (ppc32 pagetables are actually 2 levels). This removes a little extraneous code, and makes it more easily compared to the 64-bit pagetable code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30Merge branch 'linux-2.6' into for-2.6.22Paul Mackerras
2007-04-26[STRING]: Move strcasecmp/strncasecmp to lib/string.cDavid S. Miller
We have several platforms using local copies of identical code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24[POWERPC] Emulate more instructions in softwareAnanth N Mavinakayanahalli
Emulate a few more instructions in software - especially useful during singlestepping (xmon/kprobes). Instructions emulated with this patch are mfcr/mtcr rX, mfxer/mtxer rX, mflr/mtlr rX, mfctr/mtctr rX and mr rA,rB. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Use mtocrf instruction in asm when CONFIG_POWER4_ONLY=yOlof Johansson
mtocrf is a faster single-field mtcrf (move to condition register fields) instruction available in POWER4 and later processors. It can make quite a difference in performance on some implementations, so use it for CONFIG_POWER4_ONLY builds. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09[POWERPC] Make ppc64_defconfig without CONFIG_PPC_PSERIES buildStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-06[POWERPC] Added kprobes support to ppc32Kumar Gala
Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-07[POWERPC] Fix array indexing error in rheap grow()Timur Tabi
The grow() function in the rheap library allocates a larger array of blocks, copies the contents of the old blocks array to the newly allocated array and fixes the list_head pointers after the copy. At the end, the new blocks must be enqueued to the empty_list of the rh_info_t structure. This patch fixes a bug where the code was indexing past the end of the array when enqueueing blocks. The UCC ethernet driver, which uses the rheap allocator, experiences kernel panics because of this bug. Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] 8xx: generic 8xx code arch/powerpc portVitaly Bordug
Including support for non-coherent cache, some mm-related things + relevant field in Kconfig and Makefiles. Also included rheap.o compilation if 8xx is defined. Non-coherent mapping were refined and renamed according to Cristoph Hellwig. Orphaned functions were cleaned up. [Also removed arch/ppc/kernel/dma-mapping.c, because otherwise compiling with ARCH=ppc for a non DMA-cache-coherent platform ends up with two copies of __dma_alloc_coherent etc. -- paulus.] Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Disallow kprobes on emulate_step and branch_takenGui,Jian
On powerpc, probing on emulate_step function will crash 2.6.18.1 when it is triggered. When kprobe is triggered, emulate_step() is on its kernel path and will cause recursive kprobe fault. And branch_taken() is called in emulate_step(). This disallows kprobes on both of them. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-02[POWERPC] Fix rheap alignment problemLi Yang
Honor alignment parameter in the rheap allocator. This is needed by qe_lib. Remove compile warning. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Kumar Galak <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-28Merge branch 'upstream' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ
2006-09-21POWERPC: Move generic cpm2 stuff to powerpcVitaly Bordug
This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-20[POWERPC] make spinlocks work in a combined kernelStephen Rothwell
If we build a pSeries/iSeries combined kernel, we will need this. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-08-31Merge branch 'merge'Paul Mackerras
2006-08-31[POWERPC] Fix return value from memcpyPaul Mackerras
As pointed out by Herbert Xu <herbert@gondor.apana.org.au>, our memcpy implementation didn't return the destination pointer as its return value, and there is code in the kernel that expects that. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-13[POWERPC] iseries: Move e2a()/strne2a() into their only callerMichael Ellerman
The ASCII -> EBCDIC functions, e2a() and strne2a() are now only used in dt.c, so move them in there. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-15[POWERPC] Optimise some TOC usageAnton Blanchard
Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24[PATCH] remove powerpc bitops in favor of existing generic bitopsJon Mason
There already exists a big endian safe bitops implementation in lib/find_next_bit.c. The code in it is 90%+ common with the powerpc specific version, so the powerpc version is redundant. This patch makes the necessary changes to use the generic bitops in powerpc, and removes the powerpc specific version. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] powerpc: fix various sparse warningsStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-25powerpc: fix strncasecmp prototypeLinus Torvalds
It takes a size_t, not an int, as its third argument. Signed-off-by: Linus Torvalds <torvalds@osdl.org>