aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/40x
AgeCommit message (Collapse)Author
2008-01-25[POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-09[POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.Stephen Neuendorffer
Includes both flavors of plb, opb, dcr, and a pseudo 'compound' bus for representing compound peripherals containing more than one logical device. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-12-24[POWERPC] 4xx: Use machine_device_initcall for bus probeJosh Boyer
Some machine_xx_initcall macros were recently added that check for the machine type before calling the function. This converts the 4xx platforms to use those for bus probing. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Mark of_bus structures as __initdataJosh Boyer
Mark the of_device_id structures used to probe the various busses on 4xx as __initdata. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add AMCC Makalu board support to platforms/40xStefan Roese
This patch adds basic support for the AMCC Makalu board to arch/powerpc. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add Kilauea PCIe support to dts and KconfigStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add 405EX CPU type needed for EMAC support on KilaueaStefan Roese
For EMAC support, 405EX needs to be defined to enable the corresponding EMAC features (IBM_NEW_EMAC_EMAC4, etc.). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resourcesBenjamin Herrenschmidt
This makes 4xx embedded platforms re-assign all PCI resources as we pretty much never care about what the various firmwares have done on these, it's generally not compatible with the way the kernel will map the bridges. We still need to also enable bus renumbering on some of them, but I will do that from a separate patch after I've fixed 4xx PCIe to handle all bus numbers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add PCI to Walnut platformBenjamin Herrenschmidt
This wires up the 4xx PCI support & device-tree bits for the 405GP based Walnut platform. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: EP405 boards support for arch/powerpcBenjamin Herrenschmidt
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD comes from a device-tree property, PCI is working to the point where I can see the video card, USB device, and south bridge. This should work with both EP405 and EP405PC. I've not totally figured out how IRQs are wired on this hardware though, thus at this stage, expect only USB interrupts working, pretty much the same as what arch/ppc did. Also, the flash, nvram, rtc and temp control still have to be wired. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-19[POWERPC] 4xx: Replace #includes of asm/of_platform.h with linux/of_platform.h.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19[POWERPC] 4xx: Enable EMAC for PPC405 Walnut boardJosh Boyer
This patch enables the ibm_newemac driver for the Walnut board. It fixes the device tree for the walnut board to order the MAL interrupts correctly and adds the local-mac-address property to the EMAC node. The bootwrapper is also updated to extract the MAC address from the OpenBIOS offset where it is stored. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-11[POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40xStefan Roese
This patch adds basic support for the new 405EX and the AMCC eval board Kilauea to arch/powerpc. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-11[POWERPC] Remove empty ppc_md.setup_arch hooksGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Virtex: Add generic Xilinx Virtex board supportGrant Likely
Adds support for generic Xilinx Virtex boards. Any board which specifies "xilinx,virtex" in the compatible property will make use of this board support. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Virtex: Add Kconfig macros for Xilinx Virtex board supportGrant Likely
Add the needed kconfig macros to enable Xilinx Virtex board support Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07[POWERPC] Walnut board supportJosh Boyer
Board support for the PPC405 Walnut evaluation board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20[POWERPC] 4xx Kconfig cleanupJosh Boyer
Remove some leftover cruft in the 40x Kconfig file. Also make sure we select WANT_DEVICE_TREE for 40x. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20[POWERPC] Rename 4xx paths to 40xJosh Boyer
4xx is a bit of a misnomer for certain things, as they really apply to PowerPC 40x only. Rename some of the files to clean this up. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>