aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/44x
AgeCommit message (Collapse)Author
2008-08-28powerpc/44x: Add explicit Yosemite supportJosh Boyer
Add the Yosemite board to the explicitly supported list for ppc44x_simple boards and remove the compatible entry for bamboo from the DTS file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Add explicit support for AMCC GlacierJosh Boyer
Add explicit support for the AMCC Glacier eval board to Kconfig and the ppc44x_simple file. Also removes the cayonlands compatible entry from the DTS file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Taishan support to ppc44x_simpleJosh Boyer
Migrate the AMCC Taishan board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Sequoia support to ppc44x_simpleJosh Boyer
Migrate the AMCC Sequoia board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Rainier support to ppc44x_simpleJosh Boyer
Migrate the AMCC Rainier board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Katmai support to ppc44x_simpleJosh Boyer
Migrate the AMCC Katmai board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Canyonlands support to ppc44x_simpleJosh Boyer
Migrate the AMCC Canyonlands board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Migrate Bamboo support to ppc44x_simpleJosh Boyer
Migrate the AMCC Bamboo board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-28powerpc/44x: Add PowerPC 44x simple platform supportJosh Boyer
This adds a common board file for almost all of the "simple" PowerPC 44x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-04powerpc/4xx: Cleanup Warp for i2c driver changes.Sean MacLennan
This patch removes the i2c code which is now obsolete due to the new ibm iic driver walking the device tree for child nodes. There are two other small cleanups that came indirectly from the ad7414 code review. Make sure Tlow is correct and handle the case where i2c_smbus_read_word_data fails. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-04powerpc/44x: Adjust warp-nand resource end addressValentine Barshak
Adjust the NDFC resource end value (resource size = end - start + 1). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09powerpc/44x: Support NAND boot for Rev A Warp boardsSean MacLennan
Allow the Rev A Warp boards to boot from NAND. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-04powerpc/virtex: add Xilinx Virtex 5 ppc440 platform supportJohn Linn
Support for the Xilinx Virtex5 FXT 440 is being added. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-06-11powerpc/4xx: Sam440ep supportGiuseppe Coviello
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11powerpc/4xx: Fix resource issue in warp-nand.cValentine Barshak
The "ndfc-chip" device doesn't need any resources. All resources are handled by the "ndfc-nand" device. Registering the same memory resource twice causes "cat /proc/iomem" to go into an infinite loop displaying NDFC memory addresses. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-29[POWERPC] PIKA Warp: Update platform code to support Rev B boardsSean MacLennan
* Switched from 64M NOR/64M NAND to 4M NOR/256M NAND. * Full DTM support including critical temperature. * Added POST information. * Removed LED function, moved to new LED driver. * Moved ad7414 to new style I2C initialization. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-16[POWERPC] 4xx: Add idle wait support for 44x platformsJerone Young
This changes the cpu_idle loop for 44x platforms to utilize the Wait Enable feature of the CPU. This helps virtulization solutions know when the guest Linux kernel is in an idle state. A command line option called "idle" is also added to allow people to change the idle loop back to the original variation. This is done by setting "idle=spin" on the kernel command line. Signed-off-by: Jerone Young <jyoung5@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-05[POWERPC] 4xx: Use machine_device_initcall() for warp_nandValentine Barshak
With a multiplatform kernel, once built we always have warp_setup_nand_flash() called and NDFC probed, no matter what machine we actually run on. This potentially can cause problems (such as kernel crash), since NDFC is probed at a warp-predefined address. Using machine_device_initcall() NAND devices are registered if we run on a warp only. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-02[POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.cStefan Roese
This patch creates a common system reset routine for all 40x and 44x systems. Previously only a 44x routine existed. But since this system reset via the debug control register is common for 40x and 44x let's share this code for all those platforms in ppc4xx_soc.c. This patch also enables CONFIG_4xx_SOC for all 40x and 44x platforms. Tested on Kilauea (405EX) and Canyonlands (440EX). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26[POWERPC] 4xx: Add PPC4xx L2-cache support (440GX)Stefan Roese
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26[POWERPC] 4xx: Add platform support for the AMCC Yosemite boardJosh Boyer
The AMCC 440EP Yosemite board is very similar to the original AMCC Bamboo board. This adds a YOSEMITE option to Kconfig, and reuses the existing bamboo board support in the kernel. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26[POWERPC] 4xx: Add AMCC Canyonlands 460EX eval board support to platforms/44xStefan Roese
Canyonlands is the AMCC 460EX eval board, featuring nearly all of the 460EX interfaces: - 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane) - 2 * GBit Ethernet with TCP/IP acceleration - USB 2.0 Host/Device OTG and Host interface - SATA port Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15[POWERPC] 44x: Fix Kconfig formattingJosh Boyer
Clean up some whitespace issues in the 44x Kconfig file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-06[POWERPC] 4xx: Fix offset value on Warp boardSean MacLennan
While merging, I found a small bug that I forgot to send. I add an offset to a value twice. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp base platformSean MacLennan
Add the base platform support for the PIKA Warp boards. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-17[POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-02[POWERPC] 4xx: typo in calling machine_device_initcall() for Sequoia boardGrant Likely
Fix an obvious typo. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Use machine_device_initcall for bus probeJosh Boyer
Some machine_xx_initcall macros were recently added that check for the machine type before calling the function. This converts the 4xx platforms to use those for bus probing. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Mark of_bus structures as __initdataJosh Boyer
Mark the of_device_id structures used to probe the various busses on 4xx as __initdata. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigsJosh Boyer
Enable PCI support for these eval boards among other things. Also selects PCI for Rainier in the Kconfig file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: libfdt and pci fixes for RainierJosh Boyer
Update the Rainier wrapper for the libfdt merge and add the pci flags to the platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Include missing headerJosh Boyer
A small error caused a header file to be removed making sequoia support no longer compile. Fix it. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: 440GRx Rainier board support.Valentine Barshak
PowerPC 440GRx Rainier board support. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resourcesBenjamin Herrenschmidt
This makes 4xx embedded platforms re-assign all PCI resources as we pretty much never care about what the various firmwares have done on these, it's generally not compatible with the way the kernel will map the bridges. We still need to also enable bus renumbering on some of them, but I will do that from a separate patch after I've fixed 4xx PCIe to handle all bus numbers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Base support for 440SPe "Katmai" eval boardBenjamin Herrenschmidt
This adds base support for the Katmai board, including PCI-X and PCI-Express (but no RTC, nvram, etc... yet). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Wire up PCI on Bamboo boardBenjamin Herrenschmidt
This adds the device-tree bits & call to ppc4xx_pci_find_bridges() to make PCI work on the Bamboo board Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Base support for 440GX Taishan eval boardHugh Blemings
This patch adds base support for the AMCC Taishan 440GX evaluation board. Signed-off-by: Hugh Blemings <hugh@blemings.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: PCI support for Ebony boardBenjamin Herrenschmidt
This wires up the 4xx PCI support & device tree bits for 440GP based Ebony platform. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] Reworking machine check handling and Fix 440/440ABenjamin Herrenschmidt
This adds a cputable function pointer for the CPU-side machine check handling. The semantic is still the same as the old one, the one in ppc_md. overrides the one in cputable, though ultimately we'll want to change that so the CPU gets first. This removes CONFIG_440A which was a problem for multiplatform kernels and instead fixes up the IVOR at runtime from a setup_cpu function. The "A" version of the machine check also tweaks the regs->trap value to differenciate the 2 versions at the C level. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-19[POWERPC] 4xx: Replace #includes of asm/of_platform.h with linux/of_platform.h.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19[POWERPC] 4xx: Enable EMAC on Bamboo boardJosh Boyer
Fix some device tree omissions that prevented the new EMAC driver from setting up ethernet on the Bamboo board correctly and update the Bamboo defconfig. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19[POWERPC] 4xx: Enable NEW EMAC support for Sequoia 440EPx.Valentine Barshak
This patch enables NEW EMAC support for PowerPC 440EPx Sequoia board. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19[POWERPC] 4xx: Add RGMII support for Sequoia 440EPxValentine Barshak
This adds RGMII support to Sequoia DTS and sets correct phy-mode for EMACs. According to Sequoia datasheet, both ethernet ports are connected to RGMII interface, while ZMII is used only for MDIO. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11[POWERPC] Remove empty ppc_md.setup_arch hooksGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-10Device tree aware EMAC driverDavid Gibson
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-07[POWERPC] Fix bus probe on Bamboo boardJosh Boyer
Commit 804ace8881d21 changed the behavior of how compatible nodes are found. This highlighted a bug on the Bamboo board where it wasn't probing the bus specified in the DTS file. We fix it by being explicit about which bus to probe. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbvear.id.au>
2007-09-07[POWERPC] PowerPC 440EPx: Sequoia board supportValentine Barshak
AMCC PPC440EPx Sequoia board support. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20[POWERPC] Bamboo board supportJosh Boyer
Add support for the AMCC Bamboo board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 03:03:20 +0000