aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/83xx
AgeCommit message (Collapse)Author
2008-02-05[POWERPC] 83xx: mpc832x_rdb: fix compiler warningKim Phillips
arch/powerpc/platforms/83xx/mpc832x_rdb.c: In function ‘mpc832x_rdb_setup_arch’: arch/powerpc/platforms/83xx/mpc832x_rdb.c:104: warning: ‘np’ is used uninitialized in this function Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: configure USB clock for MPC8315EKim Phillips
SCCR USB bits are in a different location on the mpc8315. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: rework platform KconfigKumar Gala
* Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add MPC837x RDB platform supportKim Phillips
primarily based on mpc837x mds code. Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add base platform support for the mpc8315 rdb boardKim Phillips
mpc8315 identical to mpc8313 here, just check compatible. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platformKim Phillips
prepare for adding support for the mpc8315 rdb, since they are identical wrt platform code. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add support for Wind River SBC834x boardsPaul Gortmaker
This adds the basic support for the Wind River SBC834x boards. The SBC8349 is more common, although it should work on the SBC8347 board as well. Support is heavily based on the existing MPC834x_MDS code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RBD add NAND to device treeScott Wood
Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: introduce localbus and pata nodesAnton Vorontsov
This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: USB device tree cleanupsLi Yang
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Add MPC837x USB platform supportLi Yang
Add chip specific and board specific initialization for MPC837x USB. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: convert boards to use machine_device_initcallKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-24[POWERPC] Remove unneeded variable declarations from mpc837x_mdsJosh Boyer
Remove the declarations for isa_io_base and isa_mem_base as they are declared in pci-common.c now. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-20[POWERPC] pci32: Add flags modifying the PCI code behaviourBenjamin Herrenschmidt
This adds to the 32 bits PCI code some flags, replacing the old pci_assign_all_busses global, that allow us to control various aspects of the PCI probing, such as whether to re-assign all resources or not, or to not try to assign anything at all. This also adds the flag x86 already has to avoid ISA alignment on bridges that don't have ISA forwarding enabled (no legacy devices on the top level bus) and sets it for PowerMacs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-13[POWERPC] 83xx: mpc8313erdb: Fix whitespace.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-13[POWERPC] 83xx: mpc834x_mds: Fix whitespace and call of_platform_bus_probe().Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] 83xx: Add platform support for MPC837x MDS boardLi Yang
The MPC837x MDS is a new member of Freescale MDS reference system. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] 8xxx: Convert #include of asm/of_{platform, device}.h into ↵Jon Loeliger
linux/of_{platform, device}.h. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20[POWERPC] 83xx: MPC832x RDB - remove spidev stub, use mmc_spiAnton Vorontsov
mmc_spi has hit the mainline, so we can start using it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20[POWERPC] 8xxx: MDS board RTC fixesKim Phillips
Now the rtc class ds1374 driver has been added, remove the old rtc driver hookup code, add rtc node to device trees, and turn on the new driver in the defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-19[POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratumKim Phillips
If on a rev. 2.1, adjust UCC clock and data timing characteristics as specified in the rev.2.1 erratum #2. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-19[POWERPC] 83xx: mpc832x mds: Fix board PHY reset codeKim Phillips
currently the board-level PHY reset code for the mpc832x MDS messes with reset configuration words source settings which is plain wrong (it looks like this board code was cut-n-pasted from the mpc8360 mds code, which has the PHY reset bits in a different BCSR); this patch points the PHY reset code to the proper mpc832x mds PHY reset bits in the BCSR. Signed-off-by: Peter Van Ackeren <peter.vanackeren@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-19[POWERPC] Fix potential NULL dereferenceCyrill Gorcunov
This patch does fix potential NULL pointer dereference that could take place inside of strcmp() if of_get_property() call failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] QEIC: Implement pluggable handlers, fix MPIC cascadingAnton Vorontsov
set_irq_chained_handler overwrites MPIC's handle_irq function (handle_fasteoi_irq) thus MPIC never gets eoi event from the cascaded IRQ. This situation hangs MPIC on MPC8568E. To solve this problem efficiently, QEIC needs pluggable handlers, specific to the underlaying interrupt controller. Patch extends qe_ic_init() function to accept low and high interrupt handlers. To avoid #ifdefs, stack of interrupt handlers specified in the header file and functions are marked 'static inline', thus handlers are compiled-in only if actually used (in the board file). Another option would be to lookup for parent controller and automatically detect handlers (will waste text size because of never used handlers, so this option abolished). qe_ic_init() also changed in regard to support multiplexed high/low lines as found in MPC8568E-MDS, plus qe_ic_cascade_muxed_mpic() handler implemented appropriately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] Use for_each_ matching routinues for pci PHBsKumar Gala
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete bridges (mpc10x, tsi108) use the new for_each_compatible_node() or for_each_node_by_type() to provide more exact matching when looking for PHBs in the device tree. With the previous code it was possible to match on pci bridges since we were only matching on device_type. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-28[POWERPC] Fix mpc834x USB-MPH configuration.jacmet@sunsite.dk
mpc834x USB-MPH configuration got broken by commit 6f442560021aecf08658e26ed9a37e6928ef0fa1. The selection bits in SICRL should be cleared rather than set to configure the USB MUXes for the MPH. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stubAnton Vorontsov
Enabled using SPI controller on the MPC832x RDB board. We currently use a modalias of "spidev" as a place holder (replace with "mmc_spie") until the mmc_spi driver support is merged in. This gets us the ability to test SPI until then. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 83xx: Removed PCI exclude of PHBKumar Gala
Now that the generic code doesn't assign resources for Freescale PHBs we dont have to explicitly exclude it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22[POWERPC] Remove old includes from arch/ppcKumar Gala
Remove includes of files that existed in arch/ppc that we dont need in arch/powerpc anymore. The following includes were removed: <asm/amigappc.h> <asm/bootinfo.h> <asm/ppcboot.h> <asm/ppc_sys.h> <asm/residual.h> <asm/m8260_pci.h> This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be needed and thus removed. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-10[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms ↵Kim Phillips
with QE UEC" This reverts commit 3baee955953957be5496cd28e9c544d9db214262. That commit was a mistake from the start; I added mdio type to the bus scan list early on in my ucc_geth migrate to phylib development, which is just pure wrong (the ucc_geth_mii driver creates the mii bus and the PHY layer handles PHY enumeration without translation). This follows on from commit 77926826f301fbd8ed96d3cd9ff17a5b59560dfb: Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()" which was basically trying to hide a symptom of the original mistake this revert fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10[POWERPC] 83xx: Add USB support to mpc8349-mitx board portGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10[POWERPC] 83xx: USB platform code reworkLi Yang
Add 831x USB platform setup code and rework 834x USB platform setup code. Move USB platform code to usb.c for different boards with CPU of the same series to share the USB initialization code. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypesKumar Gala
Make the ppc32 pcibios_alloc_controller take a device node to match the ppc64 prototypes and have it set arch_data. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Removed remnants of bus_offsetKumar Gala
Removed the remants of bus_offset and use self_busno in the mv64x60 case and use pci_assign_all_buses on 83xx/85xx. 83xx/85xx have multiple PHBs and the firmwares on these devices tend not to handle topologies with P2P bridges well so we let Linux just reassign the bus numbers to match. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Remove hack to determine the 2nd PHBs bus numberKumar Gala
Now that we have the pci_controller in the exclude function we can easy figure out if the bus number is the PHB or not. The old style of using a variable setup at init time was actually broken and would only work in specific cases. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Pass the pci_controller into pci_exclude_deviceKumar Gala
There are times that we need to know which controller we are on to decide how to exclude devices properly. We now pass the pci_controller that we are going to use down to the pci_exclude_device function. This will greatly simplify being able to exclude the PHBs in multiple controller setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Remove set_cfg_type for PCI indirect users that don't need itKumar Gala
The Freescale and Marvell PCI controllers dont require explicit setting for type 1 config cycles. They handle producing them by implicitly looking at the bus, devfn. The TSI108 and 52xx don't use the generic PCI indirect code and thus don't bother with set_cfg_type. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] kill isa_{io,mem}_base definitions for !PCIArnd Bergmann
When CONFIG_PCI is disabled, the definitions for isa_io_base, isa_mem_base and pci_dram_offset are entirely unused, but they can result in link failure because they are defined in multiple places. The easiest fix is to just remove all these definitions. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29[POWERPC] rename add_bridge to avoid namespace clashesArnd Bergmann
Many platforms currently define their own add_bridge function, some of them globally. This breaks some multiplatform configurations. Prefixing each of these functions with the platform name avoids this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29[POWERPC] move 82xx/83xx/86xx Kconfig options to platform selectionArnd Bergmann
The cores used in the MPC82xx/83xx/86xx embedded controllers are very similar to those in the 32 bit general-purpose processors, so it makes sense to treat them as the same CPU family. Choosing between the embedded platforms and the multiplatform code is now done in the platform menu, but functionally everything stays the same. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-05-09[POWERPC] 83xx: Suppress warning when CONFIG_ options aren't definedKumar Gala
Suppress warning when CONFIG_PCI & CONFIG_QUICC_ENGINE is not defined Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09[POWERPC] 83xx: Suppress warning when CONFIG_PCI is not definedLi Yang
Suppress warning when CONFIG_PCI is not defined. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-02[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UECKim Phillips
Add 'mdio' to bus scan id list for platforms with QE UEC as a consequence of converting UEC mdio driver to an of_platform driver in the ucc_geth phylib conversion patch. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24Merge branch 'kconfig' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22
2007-04-12[POWERPC] Convert 83xx platform to unified platform KconfigKumar Gala
Moved 83xx platform Kconfig over to being sourced by the unified arch/powerpc/platforms/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13Merge branch 'linux-2.6' into for-2.6.22Paul Mackerras
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 01:19:51 +0000