aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx
AgeCommit message (Collapse)Author
2008-04-17[POWERPC] 85xx: Fix compile warningKumar Gala
arch/powerpc/platforms/85xx/mpc85xx_ads.c: In function ‘init_ioports’: arch/powerpc/platforms/85xx/mpc85xx_ads.c:168: warning: initialization discards qualifiers from pointer target type Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] CPM: Always use new binding.Scott Wood
The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 85xx: Enable DMA engine on the MPC8544 DSSebastian Siewior
Add the device tree node for the DMA engine on 8544, publish the device and enable the driver in the defconfig. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-01[POWERPC] Replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26[POWERPC] 85xx: Emerson KSI8560 base supportAlexandr Smirnov
The KSI8560 is a single compact, mid-, or full-size Advanced Mezzanine Card (AdvancedMC™) based on the Freescale™ Semiconductor MPC8560 PowerQUICC III™ microprocessor. This product will serve in data and signaling applications such as signaling gateways (SGW) and softswitch signaling interface cards. The board has altera maxii CPLD, that is used to obtain and manage board configuration. Also there are two SCC UART serial consoles and FCC ethernet, that is routed to the front panel, while other ethernet controlers (TSEC's) are routed to the backplane. Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: convert sbc85* boards to use machine_device_initcallKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: rework platform KconfigKumar Gala
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xxKumar Gala
* "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add basic support for Wind River SBC8548 boardPaul Gortmaker
This adds the basic support for the Wind River SBC8548 board, implemented as powerpc. It closely follows the implementation of the MPC8548CDS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boardsPaul Gortmaker
Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add support for Wind River SBC8560 in arch/powerpcPaul Gortmaker
This adds support for the Wind River SBC8560 board, implemented as powerpc. It closely follows the implementation of the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port STX GP3 board over from arch/ppcKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: mpc85xx_ads: add in missing of_node_put()Paul Gortmaker
Add in missing of_node_put() after cpm2_pic_init(). This and other coding style cleanups as suggested by Stephen Rothwell. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: convert boards to use machine_device_initcallKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] 8xxx: Convert #include of asm/of_{platform, device}.h into ↵Jon Loeliger
linux/of_{platform, device}.h. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11[POWERPC] 85xx: Killed <asm/mpc85xx.h>Kumar Gala
asm-powerpc/mpc85xx.h was really a hold over from arch/ppc. Now that more decoupling has occurred we can remove <asm/mpc85xx.h> and some of its legacy. As part of this we moved the definition of CPM_MAP_ADDR into cpm2.h for 85xx platforms. This is a stop gap until drivers stop using CPM_MAP_ADDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-11[POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] 85xx: mpc85xx_mds - reset UCC ethernet properlyAnton Vorontsov
Apart from that the current code doesn't compile it's also meaningless with regard to the MPC8568E-MDS' BCSR. This patch used to reset UCCs properly. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] QEIC: Implement pluggable handlers, fix MPIC cascadingAnton Vorontsov
set_irq_chained_handler overwrites MPIC's handle_irq function (handle_fasteoi_irq) thus MPIC never gets eoi event from the cascaded IRQ. This situation hangs MPIC on MPC8568E. To solve this problem efficiently, QEIC needs pluggable handlers, specific to the underlaying interrupt controller. Patch extends qe_ic_init() function to accept low and high interrupt handlers. To avoid #ifdefs, stack of interrupt handlers specified in the header file and functions are marked 'static inline', thus handlers are compiled-in only if actually used (in the board file). Another option would be to lookup for parent controller and automatically detect handlers (will waste text size because of never used handlers, so this option abolished). qe_ic_init() also changed in regard to support multiplexed high/low lines as found in MPC8568E-MDS, plus qe_ic_cascade_muxed_mpic() handler implemented appropriately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] mpc85xx_mds: select QUICC_ENGINEAnton Vorontsov
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] 85xx/86xx: refactor RSTCR reset codeKumar Gala
On the majority of 85xx & 86xx we have a register that's ability to assert HRESET_REQ to reset the board. We refactored that code so it can be shared between both platforms into fsl_soc.c and removed all the duplication in each platform directory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] Use for_each_ matching routinues for pci PHBsKumar Gala
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete bridges (mpc10x, tsi108) use the new for_each_compatible_node() or for_each_node_by_type() to provide more exact matching when looking for PHBs in the device tree. With the previous code it was possible to match on pci bridges since we were only matching on device_type. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS portKumar Gala
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Remove unnecessary loops_per_jiffy initialization code.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13[POWERPC] 85xx: Clean up from 85xx_ds renameKumar Gala
Renamed functions in 85xx_ds from 8544 to 85xx. Kept an unique machine def/probe for the MPC8544 DS board to handle some subtle differences between the future board based on the DS platform. Also fixed building w/o CONFIG_PCI and minor whitespace fixes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13[POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.cKumar Gala
Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more generic in prep for other boards based on the same platform. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-10[POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCIKumar Gala
We needed some ifdef CONFIG_PCI protection for pcibios_fixup so we can build !CONFIG_PCI. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-28Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-08-22[POWERPC] Remove old includes from arch/ppcKumar Gala
Remove includes of files that existed in arch/ppc that we dont need in arch/powerpc anymore. The following includes were removed: <asm/amigappc.h> <asm/bootinfo.h> <asm/ppcboot.h> <asm/ppc_sys.h> <asm/residual.h> <asm/m8260_pci.h> This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be needed and thus removed. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-10[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms ↵Kim Phillips
with QE UEC" This reverts commit 3baee955953957be5496cd28e9c544d9db214262. That commit was a mistake from the start; I added mdio type to the bus scan list early on in my ucc_geth migrate to phylib development, which is just pure wrong (the ucc_geth_mii driver creates the mii bus and the PHY layer handles PHY enumeration without translation). This follows on from commit 77926826f301fbd8ed96d3cd9ff17a5b59560dfb: Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()" which was basically trying to hide a symptom of the original mistake this revert fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-24[POWERPC] 85xxCDS: Misc 8548 PCI Corrections.Randy Vinson
Setting the host bridge @8000 as primary. Also fixing a bug in setting the USB interrupt numbers. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xxCDS: Delay 8259 cascade hookup.Randy Vinson
The interrupts of an E100 card inserted in PCI slot 4 may be on at bootup. The resulting interrupt flood interacts with the 8259 cascade handler and prevents proper boot up. There is a quirk for the E100 that will disable the E100's interrupts but to use it, the 8259 cascade hookup must be delayed until after the quirk has run. This patch delays the 8259 cascade hookup by registering a device_initcall() which runs after the PCI quirk for the E100. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Make sure restart resets the PCI bus.Randy Vinson
The current 85xxCDS restart code fails to reset the PCI bus which can lead to odd behavior after the restart. This patch uses the VIA Super Southbridge to perform a PCI reset which will reset the entire system. NOTE: Since the VIA chip is behind a PCI-to-PCI bridge which can be disabled with a switch setting, it may not be possible to perform the PCI bus reset. In this case, the code defaults to the previous restart mechanism. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.Randy Vinson
The Freescale MPC8555CDS and MPC8548CDS reference hardware has a legacy 8259 interrupt controller pair contained within a VIA VT82C686B Southbridge on the main carrier board. The processor complex plugs into the carrier card using a PCI slot which limits the available interrupts to the INTA-INTD PCI interrupts. The output of the 8259 cascade pair is routed through a gate array and connected to the PCI INTA interrupt line. The normal interrupt chaining hook (set_irq_chained_handler) does not allow sharing of the chained interrupt which prevents the use of PCI INTA by PCI devices. This patch allows the 8259 cascade pair to share their interrupt line with PCI devices. NOTE: The addition of the .end routine for the MPIC is not strictly necessary for this patch. It's there so this code will run from within the threaded interrupt context used by the Real Time patch. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDSKumar Gala
The newer Arcadia boards for CDS have an FPGA that shows up on PCI however isn't a real PCI device. Add a quirk to just ignore the FPGA. This is based on the following patch from Andy & York: http://ozlabs.org/pipermail/linuxppc-dev/2007-February/032042.html Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connectedKumar Gala
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Use Freescale pci/pcie common code for 85xx boardsRoy Zang
Switch the 85xx platform over to using the FSL generic PCI code. This gets ups PCIe support in addition to base PCI support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-09[POWERPC] Remove redundant pci_read_irq_line() function for 85xx platformRoy Zang
Remove redundant pci_read_irq_line() function for 85xx CDS board. This function has been realized in common ppc pci code. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03[POWERPC] Reworked interrupt numbers for OpenPIC based Freescale chipsKumar Gala
Make the interrupt numbers match the OpenPIC spec intead of the Freescale docs which distinguish between internal and external interrupts. Now we can use the interrupt number directly to find the register offset associated with it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03[POWERPC] 85xx: Fix 8548CDS reset bugRoy Zang
Begin with MPC8548 a new reset control register is added that asserts HRESET_REQ to board logic. This register is used for chip reset. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypesKumar Gala
Make the ppc32 pcibios_alloc_controller take a device node to match the ppc64 prototypes and have it set arch_data. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Removed remnants of bus_offsetKumar Gala
Removed the remants of bus_offset and use self_busno in the mv64x60 case and use pci_assign_all_buses on 83xx/85xx. 83xx/85xx have multiple PHBs and the firmwares on these devices tend not to handle topologies with P2P bridges well so we let Linux just reassign the bus numbers to match. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>