aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/86xx/Kconfig
AgeCommit message (Collapse)Author
2010-04-19powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=nAnton Vorontsov
Currently some MPC85xx and MPC86xx boards fail to build without CONFIG_PCI: arch/powerpc/platforms/fsl_uli1575.c: In function 'quirk_final_uli5249': arch/powerpc/platforms/fsl_uli1575.c:234: error: implicit declaration of function 'pci_bus_for_each_resource' arch/powerpc/platforms/fsl_uli1575.c:234: error: expected ';' before '{' token cc1: warnings being treated as errors arch/powerpc/platforms/fsl_uli1575.c:223: warning: unused variable 'dummy' make[1]: *** [arch/powerpc/platforms/fsl_uli1575.o] Error 1 This patch fixes the issue by appending 'if PCI' condition when selecting FSL_ULI1575 Kconfig symbol. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-04powerpc/86xx: Renaming following split of GE Fanuc joint ventureMartyn Welch
This patch renames GE Fanuc boards following the split-up of the GE Fanuc joint venture. These boards are now made by GE Intelligent platorms. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20powerpc/86xx: Support for NVRAM on GE Fanuc's PPC9AMartyn Welch
Add support for NVRAM on GE Fanuc's PPC9A. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20powerpc/86xx: Support for NVRAM on GE Fanuc's SBC310Martyn Welch
Add support for NVRAM on GE Fanuc's SBC310. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20powerpc/86xx: Enable NVRAM on GE Fanuc's SBC610Martyn Welch
This patch enables the NVRAM found on the GE Fanuc SBC610 Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15powerpc: Add 86xx support for SWIOTLBBecky Bruce
This is the final bit of code to allow enabling swiotlb on mpc86xx. The platform-specific code is very small and consists of enabling SWIOTLB in the config file, registering the swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops to point to swiotlb_pci_dma_ops if we have more memory than can be mapped by the inbound PCI windows. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-20Merge commit 'kumar/next' into nextBenjamin Herrenschmidt
2009-03-19powerpc/86xx: Board support for GE Fanuc's PPC9AMartyn Welch
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's PPC9A, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11powerpc/kconfig: Kill PPC_MULTIPLATFORMBenjamin Herrenschmidt
CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28powerpc/86xx: Board support for GE Fanuc SBC310Martyn Welch
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's SBC310, a 3U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/86xx: Basic GPIO support for GE Fanuc SBC610Martyn Welch
Basic support for the GPIO available on the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds basic support for the GPIO in the devices I/O FPGA, the GPIO functionality is exposed through the AFIX pins on the backplane, unless used by an AFIX card. This code currently does not support switching between totem-pole and open-drain outputs (when used as outputs, GPIOs default to totem-pole). The interrupt capabilites of the GPIO lines is also not currently supported. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16powerpc: Board support for GE Fanuc SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/85xx/86xx: some refactoring for fsl_uli1575 codeAnton Vorontsov
- Get rid of uses_fsl_uli_m1575, it does not scale for all cases. Instead, let's explicitly use machine_is() for each fixup. - Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with machine_is(). One step closer to multiplatform kernels. - Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied. - RTC quirk applies to all boards though, so no machine_is() checks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: pci config cleanupJohn Rigby
Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc: Add 82xx/83xx/86xx to 6xx MultiplatformKumar Gala
There isn't any reason at this point that we can't build 82xx, 83xx & 86xx support in with the other 6xx based boards. Twiddle the Kconfigs to allow this. This allows us to remove the machine type selection for related to 6xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29[RAPIDIO] Add RapidIO option to kernel configurationZhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] 86xx: Add support for Wind River SBC8641D boardPaul Gortmaker
This adds support for the Wind River SBC8641D board, based largely on the mpc86xx_hpcn support. The biggest difference is the lack of the Uli and the i8259 cascade, which simplifies things. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] Add initial MPC8610 HPCD Platform files.Xianghua Xiao
Add basic board support for the MPC8610 HPCD. This does not include any support the SoC Display or Audio controllers. Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loelier <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Create common fsl pci/e files based on 86xx platformsRoy Zang
Move arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h as the base to unify 83xx/85xx/86xx pci and pcie. Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option. The code still works for 86xx platforms. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] move 82xx/83xx/86xx Kconfig options to platform selectionArnd Bergmann
The cores used in the MPC82xx/83xx/86xx embedded controllers are very similar to those in the 32 bit general-purpose processors, so it makes sense to treat them as the same CPU family. Choosing between the embedded platforms and the multiplatform code is now done in the platform menu, but functionally everything stays the same. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-04-12[POWERPC] Convert 86xx platform to unified platform KconfigKumar Gala
Moved 86xx platform Kconfig over to being sourced by the unified arch/powerpc/platforms/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-24[POWERPC] Select DEFAULT_UIMAGE for HPC-NET/8641Paul Gortmaker
I suspect this was meant to be added like it was to a whole slew of other u-boot based boards, but probably just fell through the cracks. Add "select DEFAULT_UIMAGE" for the 8641/HPC-NET. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove redundant STD_MMU selection.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Move I8259 selection under MPC8641HPCN boardJon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] Add the mpc8641 hpcn Kconfig and Makefiles.Jon Loeliger
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 12:14:22 +0000