aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/Makefile
AgeCommit message (Collapse)Author
2008-04-24[POWERPC] celleb: Move miscellaneous files for BeatIshizaki Kou
This moves miscellaneous files for Beat into platforms/cell/. All files in this patch are used by celleb-beat only. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] mpc512x: Basic platform supportJohn Rigby
512x is very similar to 83xx and most of this is patterned after code from 83xx. New platform: changed: arch/powerpc/Kconfig arch/powerpc/platforms/Kconfig arch/powerpc/platforms/Kconfig.cputype arch/powerpc/platforms/Makefile new: arch/powerpc/platforms/512x/* include/asm-powerpc/mpc512x.h Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-07[POWERPC] Walnut board supportJosh Boyer
Board support for the PPC405 Walnut evaluation board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-08[POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for nowDavid Gibson
This prepares for Ebony/440 support by creating an arch/powerpc/platforms/44x directory. It is populated with a single misc_44x.S file, into which is moved the 44x specific reset code from head_44x.S (on the grounds that we should really stop clogging up the head_* files with random asm helper routines). At the same time, we disable the (empty save Kconfig and Makefile) arch/powerpc/platforms/4xx directory from the arch/powerpc/platforms Makefile. Contrary to the comment in arch/powerpc/platforms/4xx/Makefile, attempting to build such an empty Makefile will fail, thus breaking compile for the 44x platforms we're about to add. It can go back in once we start porting some of the 40x platforms (and thus it becomes non-empty). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13[POWERPC] Restore 'proper' link order in platformSylvain Munaut
The 52xx was put before CHRP to allow EFIKA to be recognized properly. Now the efika tree is fixed up in prom_init so no need for this ugly hack. So we restore the 'normal' order. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: basic supportIshizaki Kou
This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Fix kernel build errors for mpc8272ads and mpc8560adsVitaly Bordug
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] 8xx: Add mpc885ads support and common mpc8xx filesVitaly Bordug
This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-20[POWERPC] Probe Efika platform before CHRP.David Woodhouse
The Efika matches chrp_probe() too, so put its own probe first to make sure we get it right in a multiplatform build. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Move Efika support files into platforms/52xxGrant Likely
The Efika board isn't different enough from other 52xx based boards to justify a separate platform. This patch merges it with the support code for all other 52xx based boards. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xxGrant Likely
No other chips use this device, it belongs in a 52xx-specific path. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3Geert Uytterhoeven
When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add support for ps3 platformGeoff Levand
Adds the core platform support for the PS3 game console and other devices using the PS3 hypervisor. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-13[PATCH] Add Efika platform supportNicolas DET
Add Efika (http://www.bplan-gmbh.de/efika_spec_en.html) platform support for arch/powerpc. Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13[POWERPC] powerpc: PA Semi PWRficient platform supportOlof Johansson
Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29[POWERPC] Add general support for mpc7448hpc2 (Taiga) platformZang Roy-r61911
Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] Add the mpc8641 hpcn Kconfig and Makefiles.Jon Loeliger
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20[PATCH] powerpc: Updated Initial MPC8540 ADS port with OF Flat DevBecky Bruce
Updated patch for support for mpc8540_ads in arch/powerpc with a flat OF device tree. This patch does not yet support PCI or I2C. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx supportKumar Gala
Updated Kconfig & Makefiles in prep for adding support for the Freescale MPC83xx family of processors to arch/powerpc. Moved around some config options that are more globally applicable to other PowerPC processors. Added a temporary config option (83xx) to match existing arch/ppc support for the MPC83xx line. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: create a new arch/powerpc/platforms/cell/smp.cArnd Bergmann
During the conversion to the merge tree, the Cell specific SMP initialization was removed from the pSeries code. This creates a new Cell specific SMP implementation file. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29powerpc: Merge maple support code to arch/powerpc/platforms/maplePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge 32-bit CHRP support.Paul Mackerras
SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22ppc64: Use arch/powerpc/platforms/powermac for powermac build.Paul Mackerras
This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22powerpc: Merge in 64-bit powermac support.Paul Mackerras
This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11powerpc: Remove 83xx from arch/powerpc/platforms/Makefile for nowPaul Mackerras
Since we don't have an 83xx directory or a 83xx/Makefile, having 83xx in causes make clean to fail. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move pSeries files to arch/powerpc/platforms/pseriesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28powerpc: Make powerpc pmac 32 bit build againStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27powerpc: Create arch/powerpc/platforms/iseriesStephen Rothwell
I also move arch/ppc64/kernel/HvCall.c to arch/powerpc/platforms/iseries/hvcall.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27powerpc: clean up after powermac build mergeStephen Rothwell
Complete moving arch/ppc64/kernel/mpic.h, include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h and include/asm-ppc64/kprobes.h Add arch/powerpc/platforms/Makefile and use it from arch/powerpc/Makefile Introduce OLDARCH temporarily so we can point back to the originating architecture Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>