aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2007-09-19[POWERPC] spusched: Fix null pointer dereference in find_victimChristoph Hellwig
find_victim can dereference a NULL pointer when iterating over the list of victim spus because list_mutex only guarantees spu->ct to be stable, but of course not to be non-NULL. Also fix find_victim to not call spu_unbind_context without list_mutex because that violates the above guarantee. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-12Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Move serial_dev_init to device_initcall() [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue [POWERPC] cpm2: Fix off-by-one error in setbrg(). [PPC] 8xx: Fix r3 trashing due to 8MB TLB page instantiation [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI
2007-09-12[POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issueKumar Gala
Since the ULI1575 has a ISA bus we need to enable the generic ISA dma support for drivers that might expect it. Without this we get compile errors like the following: ound/built-in.o: In function `claim_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' sound/built-in.o: In function `release_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:195: undefined reference to `dma_spin_lock' sound/built-in.o: In function `claim_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' sound/built-in.o:/home/galak/git/linux-8572/include/asm/dma.h:195: more undefined references to `dma_spin_lock' follow make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-10[POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCIKumar Gala
We needed some ifdef CONFIG_PCI protection for pcibios_fixup so we can build !CONFIG_PCI. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-11[POWERPC] cell/PS3: Ignore storage devices that are still being probedGeert Uytterhoeven
On PS3, A storage device may show up in the repository before the hypervisor has finished probing: - If its type is not yet known, it shows up as PS3_DEV_TYPE_STOR_DUMMY, - If its regions are being probed, it shows up as having zero regions. If any of these happen, consider the device not yet present. The storage probe thread will retry later. This fixes the timing-dependent problem where a kernel booted from FLASH ROM sometimes cannot find the hard disk. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Always set master run control bit in mfc_sr1_setJeremy Kerr
At present, running any SPE program on the ps3 will trigger a BUG_ON when spufs_run_spu tries to clear the master run control bit, as lv1 does not make the master run control available to Linux. This change makes SPE apps work again by disabling changes to the master run control on PS3. Although we don't have the facility to disable a SPE with supervisor-level privileges, it's better than hitting the BUG_ON unconditionally. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 ↵Masato Noguchi
interrupt. The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt is edge-triggered. The current spu interrupt handler assumes this behavior and does not clear the interrupt status. The PS3 hypervisor visualizes all SPU interrupts as level, and on return from the interrupt handler the hypervisor will deliver a new virtual interrupt for any unmasked interrupts which for which the status has not been cleared. This fix clears the interrupt status in the interrupt handler. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] PS3: Fix bug where the major version part is not comparedMasakazu Mokuno
Fix the bug that the major version part of the firmware version number is ignored in the comparison done by ps3_compare_firmware_version because the difference of two 64-bit quantities is returned as an int. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spufs: Don't call spu_run_init from spu_reacquire_runnableAndre Detsch
This fixes a major bug which was happening when a SPU thread advances its execution right after being restored to a SPU. A potentially outdated NPC value was being (re)written to the SPU. So, spu_run_init, in this case, was either not doing anything relevant, or breaking the execution of the SPU thread. This fixes a common problem of losing a mailbox write when it was done to a saved context. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spufs: Fix update of mailbox status register during backed wbox writeArnd Bergmann
When a process writes into the inbound spu mailbox (wbox) while the context is saved, we accidentally break the contents of the mb_stat_R register by clearing other entries of the mailbox status register. This can cause the user side to hang. This change fixes the problem by only altering the appropriate bits of the mailbox status register during a backing-store write. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spu_manage: fix spu_unit_number for celleb device treeChristian Krafft
This fixes a regression introduced with 2.6.23-rc4 after on some confusion about the device tree interfaces. IBM QS21 device trees provide "physical-id", so we changed the code to run on that and remain compatible with all IBM machines. However, the Toshiba Celleb device tree provides the "unit-id" property, which was in the Linux code, but never used in this way on IBM hardware. Legacy device tree used the reg property for the physical id of an spe. This patch fixes find_spu_unit_number to look for the spu id in that order. The length is checked to avoid misinterpretation in case the attributes unit-id or reg do not contain the id. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Jeremy Kerr <jk@ozlabs.org>
2007-08-25[POWERPC] cell: Support pinhole-reset on IBM cell bladesArnd Bergmann
The Cell Broadband Engine has a method of injecting a system-reset-exception from an external source into the operating system, which should trigger the regular behaviour of entering xmon or kdump. Unfortunately, the exception handler cannot distinguish it from other interrupt causes by the SRR1 register, which gets used for this on Power 6 and others. IBM Blade servers that want to support triggering the system reset exception using a pinhole button in the front panel therefore use an extra register to determine the reset cause. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> -- Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] spu_manage: Use newer physical-id attributeChristian Krafft
Legacy device tree used the reg property for the physical id of an spe. On newer device tree layouts the reg property contains the "correct" value in the reg attribute. So there has been intoduced the "physical-id" on newer devicetree layouts. The id is stored by spu_manage into the spu struct as spe_id. cbe_thermal has been changed to use the spu->spe_id. There's no need for the thermal code to check devicetree attributes for itself. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] pasemi: Another IOMMU bugfix for 64K PAGE_SIZEOlof Johansson
More fallout from the switch from PAGE_SIZE based IOMMU to the native page size for the driver. By pure luck it happened to work most of the time, since we end up invalidating the wrong entries in the TLB. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-20Merge branch 'fixes-2.6.23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix 8xx compile failure [POWERPC] Fix FSL BookE machine check reporting [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards [POWERPC] Add interrupt resource for RTC CMOS driver
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-15[POWERPC] ps3: Fix no storage devices foundGeert Uytterhoeven
Fix probing of PS3 storage devices: in the success case, we should set `error' to zero, not `result'. Without this patch no storage devices are found. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] cell: Fix errno for modular spufs_create with invalid neighbourJeremy Kerr
At present, spu_create with an invalid neighbo(u)r will return -ENOSYS, not -EBADF, but only when spufs.o is built as a module. This change adds the appropriate errno, making the behaviour the same as the built-in case. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms ↵Kim Phillips
with QE UEC" This reverts commit 3baee955953957be5496cd28e9c544d9db214262. That commit was a mistake from the start; I added mdio type to the bus scan list early on in my ucc_geth migrate to phylib development, which is just pure wrong (the ucc_geth_mii driver creates the mii bus and the PHY layer handles PHY enumeration without translation). This follows on from commit 77926826f301fbd8ed96d3cd9ff17a5b59560dfb: Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()" which was basically trying to hide a symptom of the original mistake this revert fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] PS3: Remove text saying PS3 support is incompleteGeoff Levand
Remove the Kconfig message that indicates the PS3 platform support is incomplete. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] PS3: Fix storage probe logicGeert Uytterhoeven
Fix the PS3 storage probe logic to properly find device regions on cold startup. o Change the storage probe event mask from notify_device_ready to notify_region_update. o Improve the storage probe error handling. o Change ps3_storage_wait_for_device() to use a temporary variable to hold the buffer address. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] cell: Move SPU affinity init to spu_management_of_opsAndre Detsch
This patch moves affinity initialization code from spu_base.c to a new spu_management_of_ops function (init_affinity), which is empty in the case of PS3. This fixes a linking problem that was happening when compiling for PS3. Also, some small code style changes were made. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix a compile warning in powermac/feature.cSegher Boessenkool
...by using the pci_get API instead of the deprecated old stuff. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] ps3: Fix section mismatch in ps3/setup.cStephen Rothwell
WARNING: vmlinux.o(.text+0x605d4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.prealloc' and '.ps3_power_save') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] spufs: Fix affinity after introduction of node_allowed() callsAndre Detsch
This patch fixes affinity reference point placement, which was not being done in some situations, after the introduction of node_allowed() calls. The previously used parameter, 'ctx', is just the iterator of the previous list_for_each_entry_reverse loop, and its value might be invalid at the end of the loop. Also, the right context to seek for information when defining the reference ctx location _is_ the reference ctx. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] spusched: Fix initial timeslice calculationChristoph Hellwig
Currently we calculate the first timeslice for every context incorrectly - alloc_spu_context calls spu_set_timeslice before we set ctx->prio so we always calculate the longest possible timeslice for the lowest possible priority. This patch makes sure to update the schedule-related fields before calculating the timeslice and also makes sure we update the timeslice for a non-running context when entering spu_run so a priority change affects the context as soon as possible. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spusMasato Noguchi
We currently initialize cbe_spu_info[].spus in both init_spu_base and spu_sched_init. The initialise in spu_sched_init clears the SPU list, so we end up with no physical SPUs. Because of this, the spu_run syscall will block forever. This change removes the unnecessary initialization in spu_sched_init. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix Maple platform ISA busBenjamin Herrenschmidt
The Maple platform has ISA IOs but didn't call the new functions to actually map those, thus crashing when trying to access the nvram. This fixes Maple and JS2x using SLOF. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] iSeries: Fix section mismatch warning in lpeventsStephen Rothwell
WARNING: vmlinux.o(.text+0x4f568): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.setup_hvlpevent_queue' and '.process_hvlpevents') setup_hvlpevent_queue is only called from __init code so make it __init as well. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-24Merge branch 'for_paulus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits) [POWERPC] 85xx: Added needed MPC85xx PCI device IDs [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs [POWERPC] 85xxCDS: MPC8548 DTS cleanup. [POWERPC] 85xxCDS: Misc 8548 PCI Corrections. [POWERPC] 85xxCDS: Delay 8259 cascade hookup. [POWERPC] 85xxCDS: Make sure restart resets the PCI bus. [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line. [POWERPC] FSL: Add support for PCI-X controllers [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB [POWERPC] Provide ability to setup P2P bridge registers from struct resource [POWERPC] Add basic PCI/PCI Express support for 8544DS board [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime [POWERPC] Removed setup_indirect_pci_nomap [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS [POWERPC] 85xx: Added 8568 PCIe support [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected [POWERPC] Add basic PCI node for mpc8568mds board [POWERPC] Use Freescale pci/pcie common code for 85xx boards [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node ...
2007-07-24spusched: fix mismerge in spufs.hChristoph Hellwig
spufs.h now has two enums for the sched_flags leading to identical values for SPU_SCHED_WAS_ACTIVE and SPU_SCHED_NOTIFY_ACTIVE. Merge them into a single enum as they were in the IBM development tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24[POWERPC] 85xxCDS: Misc 8548 PCI Corrections.Randy Vinson
Setting the host bridge @8000 as primary. Also fixing a bug in setting the USB interrupt numbers. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xxCDS: Delay 8259 cascade hookup.Randy Vinson
The interrupts of an E100 card inserted in PCI slot 4 may be on at bootup. The resulting interrupt flood interacts with the 8259 cascade handler and prevents proper boot up. There is a quirk for the E100 that will disable the E100's interrupts but to use it, the 8259 cascade hookup must be delayed until after the quirk has run. This patch delays the 8259 cascade hookup by registering a device_initcall() which runs after the PCI quirk for the E100. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Make sure restart resets the PCI bus.Randy Vinson
The current 85xxCDS restart code fails to reset the PCI bus which can lead to odd behavior after the restart. This patch uses the VIA Super Southbridge to perform a PCI reset which will reset the entire system. NOTE: Since the VIA chip is behind a PCI-to-PCI bridge which can be disabled with a switch setting, it may not be possible to perform the PCI bus reset. In this case, the code defaults to the previous restart mechanism. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.Randy Vinson
The Freescale MPC8555CDS and MPC8548CDS reference hardware has a legacy 8259 interrupt controller pair contained within a VIA VT82C686B Southbridge on the main carrier board. The processor complex plugs into the carrier card using a PCI slot which limits the available interrupts to the INTA-INTD PCI interrupts. The output of the 8259 cascade pair is routed through a gate array and connected to the PCI INTA interrupt line. The normal interrupt chaining hook (set_irq_chained_handler) does not allow sharing of the chained interrupt which prevents the use of PCI INTA by PCI devices. This patch allows the 8259 cascade pair to share their interrupt line with PCI devices. NOTE: The addition of the .end routine for the MPIC is not strictly necessary for this patch. It's there so this code will run from within the threaded interrupt context used by the Real Time patch. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDSKumar Gala
The newer Arcadia boards for CDS have an FPGA that shows up on PCI however isn't a real PCI device. Add a quirk to just ignore the FPGA. This is based on the following patch from Andy & York: http://ozlabs.org/pipermail/linuxppc-dev/2007-February/032042.html Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connectedKumar Gala
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Use Freescale pci/pcie common code for 85xx boardsRoy Zang
Switch the 85xx platform over to using the FSL generic PCI code. This gets ups PCIe support in addition to base PCI support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xxZang Roy-r61911
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and PCIe on 85xx/86xx. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Create common fsl pci/e files based on 86xx platformsRoy Zang
Move arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h as the base to unify 83xx/85xx/86xx pci and pcie. Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option. The code still works for 86xx platforms. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-22Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Clean up duplicate includes in drivers/macintosh/ [POWERPC] Quiet section mismatch warning on pcibios_setup [POWERPC] init and exit markings for hvc_iseries [POWERPC] Quiet section mismatch in hvc_rtas.c [POWERPC] Constify of_platform_driver match_table [POWERPC] hvcs: Make some things static and const [POWERPC] Constify of_platform_driver name [POWERPC] MPIC protected sources [POWERPC] of_detach_node()'s device node argument cannot be const [POWERPC] Fix ARCH=ppc builds [POWERPC] mv64x60: Use mutex instead of semaphore [POWERPC] Allow smp_call_function_single() to current cpu [POWERPC] Allow exec faults on readable areas on classic 32-bit PowerPC [POWERPC] Fix future firmware feature fixups function failure [POWERPC] fix showing xmon help [POWERPC] Make xmon_write accept a const buffer [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option. [POWERPC] cell: CONFIG_SPE_BASE is a typo
2007-07-22Fix ppc64 mismergeAl Viro
Fix a mismerge in commit 8b6f50ef1d5cc86b278eb42bc91630fad455fb10: "spufs: make signal-notification files readonly for NOSCHED contexts", where structs got duplicated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22[POWERPC] Fix future firmware feature fixups function failureMichael Neuling
Move firmware feature initialisation from pSeries_init_early to the earlier pSeries_probe_hypertas so they are initialised before firmware feature fixups are applied. Currently firmware feature sections are only used for iSeries which initialises the these features much earlier. This is a bug in waiting on pSeries. Also adds some whitespace fixups. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22[POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-21spufs: make signal-notification files readonly for NOSCHED contextsJeremy Kerr
Reading from the signal{1,2} files requires a spu_acquire_saved, so make these files write-only for contexts created with SPU_CREATE_NOSCHED. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21ps3: FLASH ROM Storage DriverGeert Uytterhoeven
Add a FLASH ROM Storage Driver for the PS3: - Implemented as a misc character device driver - Uses a fixed 256 KiB buffer allocated from boot memory as the hypervisor requires the writing of aligned 256 KiB blocks Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21ps3: BD/DVD/CD-ROM Storage DriverGeert Uytterhoeven
Add a BD/DVD/CD-ROM Storage Driver for the PS3: - Implemented as a SCSI device driver - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>