aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2009-01-05zero i_uid/i_gid on inode allocationAl Viro
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/x86/kernel/io_apic.c
2008-12-30Merge branch 'core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) stacktrace: provide save_stack_trace_tsk() weak alias rcu: provide RCU options on non-preempt architectures too printk: fix discarding message when recursion_bug futex: clean up futex_(un)lock_pi fault handling "Tree RCU": scalable classic RCU implementation futex: rename field in futex_q to clarify single waiter semantics x86/swiotlb: add default swiotlb_arch_range_needs_mapping x86/swiotlb: add default phys<->bus conversion x86: unify pci iommu setup and allow swiotlb to compile for 32 bit x86: add swiotlb allocation functions swiotlb: consolidate swiotlb info message printing swiotlb: support bouncing of HighMem pages swiotlb: factor out copy to/from device swiotlb: add arch hook to force mapping swiotlb: allow architectures to override phys<->bus<->phys conversions swiotlb: add comment where we handle the overflow of a dma mask on 32 bit rcu: fix rcutorture behavior during reboot resources: skip sanity check of busy resources swiotlb: move some definitions to header swiotlb: allow architectures to override swiotlb pool allocation ... Fix up trivial conflicts in arch/x86/kernel/Makefile arch/x86/mm/init_32.c include/linux/hardirq.h as per Ingo's suggestions.
2008-12-30Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-12-28Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-29powerpc/44x: Support 16K/64K base page sizes on 44xIlya Yanok
This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-26cpumask: powerpc: Introduce cpumask_of_{node,pcibus} to replace ↵Rusty Russell
{node,pcibus}_to_cpumask Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. (Also replaces powerpc internal uses of node_to_cpumask). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-25Merge branch 'next' into for-linusJames Morris
2008-12-23powerpc: Remove default kexec/crash_kernel ops assignmentsAnton Vorontsov
Default ops are implicit now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc/pseries: Fix cpu hotplugSebastien Dugue
Currently, pseries_cpu_die() calls msleep() while polling RTAS for the status of the dying cpu. However, if the cpu that is going down also happens to be the one doing the tick then we're hosed as the tick_do_timer_cpu 'baton' is only passed later on in tick_shutdown() when _cpu_down() does the CPU_DEAD notification. Therefore jiffies won't be updated anymore. This replaces that msleep() with a cpu_relax() to make sure we're not going to schedule at that point. With this patch my test box survives a 100k iterations hotplug stress test on _all_ cpus, whereas without it, it quickly dies after ~50 iterations. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-22powerpc/cell: add QPACE as a separate Cell platformBenjamin Krill
Since the QPACE (Chromodynamics Parallel Computing on the Cell Broadband Engine) platform doesn't use a iommu, doesn't have PCI devices and a MPIC much lesser setup and configurations are needed. So far all devices are detected as OF device. A notifier function is used to set the dma_ops for the of_platform bus. Further this patch splits the PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are shared with the QPACE platform and the rest. Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-12-22powerpc/cell: fix build breakage with CONFIG_SPUFS disabledArnd Bergmann
CBE_THERM and OPROFILE_CELL both cannot be built without SPU_FS disabled, so make the dependency explicit. Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-12-21powerpc/mpc5200: Make internal 5200 PIC the default interrupt controllerGrant Likely
The MPC5200 internal interrupt controller setup function needs to set the default interrupt controller when it is called. Without this irq_create_of_mapping() cannot be called without first determining the pointer to the irq controller (ie. call with controller = NULL). Reported-by: Steven Cavanagh <scavanagh@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21powerpc/mpc5200: Document and tidy irq driverGrant Likely
This patch adds documentation to the mpc5200 interrupt controller driver and cleans up some minor coding conventions. It also moves the contents of mpc52xx_pic.h into the driver proper (except for a small common bit that is moved to the common mpc52xx.h) because the information encoded there is not required by any other part of kernel code. Finally for code readability sake, the L2_OFFSET shift value is removed because the code using it resolves to a noop. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDEDBenjamin Herrenschmidt
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in in the hash code based on some CPU feature bit. We also manipulate _PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places. This changes the logic so that instead, the PTE now contains _PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms that need it. The hash code clears it if the feature bit is not set. It also adds some clean accessors to setup various valid combinations of access flags and change various bits of code to use them instead. This should help having the PTE actually containing the bit combinations that we really want. I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead set it explicitely from the TLB miss. I will ultimately remove it completely as it appears that it might not be needed after all but in the meantime, having it in the TLB miss makes things a lot easier. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Introduce MMU featuresBenjamin Herrenschmidt
We're soon running out of CPU features and I need to add some new ones for various MMU related bits, so this patch separates the MMU features from the CPU features. I moved over the 32-bit MMU related ones, added base features for MMU type families, but didn't move over any 64-bit only feature yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Split mmu_context handlingBenjamin Herrenschmidt
This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add reboot notifier to Collaborative Memory ManagerBrian King
When running Active Memory Sharing, pages can get marked as "loaned" with the hypervisor by the CMM driver. This state gets cleared by the system firmware when rebooting the partition. When using kexec to boot a new kernel, this state never gets cleared and the hypervisor and CMM driver can get out of sync with respect to the number of pages currently marked "loaned". Fix this by adding a reboot notifier to the CMM driver to deflate the balloon and mark all pages as active. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Disable Collaborative Memory Manager for kdumpBrian King
When running Active Memory Sharing, the Collaborative Memory Manager (CMM) may mark some pages as "loaned" with the hypervisor. Periodically, the CMM will query the hypervisor for a loan request, which is a single signed value. When kexec'ing into a kdump kernel, the CMM driver in the kdump kernel is not aware of the pages the previous kernel had marked as "loaned", so the hypervisor and the CMM driver are out of sync. This results in the CMM driver getting a negative loan request, which can then get treated as a large unsigned value and can cause kdump to hang due to the CMM driver inflating too large. Since there really is no clean way for the CMM driver in the kdump kernel to clean this up, simply disable CMM in the kdump kernel. This fixes hangs we were seeing doing kdump with AMS. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/iseries: viodasd needs to depend on CONFIG_BLOCKStephen Rothwell
Otherwise you get lot of errors like these: drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_open': drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_release': drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_getgeo': drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity' drivers/block/viodasd.c: At top level: drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer Discovered by a randconfig build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Pass a valid token to rtas_call() in phyp-dump codeTony Breeds
ibm_configure_kernel_dump is passed as the token to rtas_call() is never initialised. This sets it to something sane. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Nathan Lynch <ntl@pobox.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Protect against NULL pointer deref in phyp-dump codeTony Breeds
print_dump_header() will be called at least once with a NULL pointer in a normal boot sequence. If DEBUG is defined then we will dereference the pointer and crash. Add a quick fix to exit early in the NULL pointer case. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18"Tree RCU": scalable classic RCU implementationPaul E. McKenney
This patch fixes a long-standing performance bug in classic RCU that results in massive internal-to-RCU lock contention on systems with more than a few hundred CPUs. Although this patch creates a separate flavor of RCU for ease of review and patch maintenance, it is intended to replace classic RCU. This patch still handles stress better than does mainline, so I am still calling it ready for inclusion. This patch is against the -tip tree. Nevertheless, experience on an actual 1000+ CPU machine would still be most welcome. Most of the changes noted below were found while creating an rcutiny (which should permit ejecting the current rcuclassic) and while doing detailed line-by-line documentation. Updates from v9 (http://lkml.org/lkml/2008/12/2/334): o Fixes from remainder of line-by-line code walkthrough, including comment spelling, initialization, undesirable narrowing due to type conversion, removing redundant memory barriers, removing redundant local-variable initialization, and removing redundant local variables. I do not believe that any of these fixes address the CPU-hotplug issues that Andi Kleen was seeing, but please do give it a whirl in case the machine is smarter than I am. A writeup from the walkthrough may be found at the following URL, in case you are suffering from terminal insomnia or masochism: http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf o Made rcutree tracing use seq_file, as suggested some time ago by Lai Jiangshan. o Added a .csv variant of the rcudata debugfs trace file, to allow people having thousands of CPUs to drop the data into a spreadsheet. Tested with oocalc and gnumeric. Updated documentation to suit. Updates from v8 (http://lkml.org/lkml/2008/11/15/139): o Fix a theoretical race between grace-period initialization and force_quiescent_state() that could occur if more than three jiffies were required to carry out the grace-period initialization. Which it might, if you had enough CPUs. o Apply Ingo's printk-standardization patch. o Substitute local variables for repeated accesses to global variables. o Fix comment misspellings and redundant (but harmless) increments of ->n_rcu_pending (this latter after having explicitly added it). o Apply checkpatch fixes. Updates from v7 (http://lkml.org/lkml/2008/10/10/291): o Fixed a number of problems noted by Gautham Shenoy, including the cpu-stall-detection bug that he was having difficulty convincing me was real. ;-) o Changed cpu-stall detection to wait for ten seconds rather than three in order to reduce false positive, as suggested by Ingo Molnar. o Produced a design document (http://lwn.net/Articles/305782/). The act of writing this document uncovered a number of both theoretical and "here and now" bugs as noted below. o Fix dynticks_nesting accounting confusion, simplify WARN_ON() condition, fix kerneldoc comments, and add memory barriers in dynticks interface functions. o Add more data to tracing. o Remove unused "rcu_barrier" field from rcu_data structure. o Count calls to rcu_pending() from scheduling-clock interrupt to use as a surrogate timebase should jiffies stop counting. o Fix a theoretical race between force_quiescent_state() and grace-period initialization. Yes, initialization does have to go on for some jiffies for this race to occur, but given enough CPUs... Updates from v6 (http://lkml.org/lkml/2008/9/23/448): o Fix a number of checkpatch.pl complaints. o Apply review comments from Ingo Molnar and Lai Jiangshan on the stall-detection code. o Fix several bugs in !CONFIG_SMP builds. o Fix a misspelled config-parameter name so that RCU now announces at boot time if stall detection is configured. o Run tests on numerous combinations of configurations parameters, which after the fixes above, now build and run correctly. Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line): o Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a changeset some time ago, and finally got around to retesting this option). o Fix some tracing bugs in rcupreempt that caused incorrect totals to be printed. o I now test with a more brutal random-selection online/offline script (attached). Probably more brutal than it needs to be on the people reading it as well, but so it goes. o A number of optimizations and usability improvements: o Make rcu_pending() ignore the grace-period timeout when there is no grace period in progress. o Make force_quiescent_state() avoid going for a global lock in the case where there is no grace period in progress. o Rearrange struct fields to improve struct layout. o Make call_rcu() initiate a grace period if RCU was idle, rather than waiting for the next scheduling clock interrupt. o Invoke rcu_irq_enter() and rcu_irq_exit() only when idle, as suggested by Andi Kleen. I still don't completely trust this change, and might back it out. o Make CONFIG_RCU_TRACE be the single config variable manipulated for all forms of RCU, instead of the prior confusion. o Document tracing files and formats for both rcupreempt and rcutree. Updates from v4 for those missing v5 given its bad subject line: o Separated dynticks interface so that NMIs and irqs call separate functions, greatly simplifying it. In particular, this code no longer requires a proof of correctness. ;-) o Separated dynticks state out into its own per-CPU structure, avoiding the duplicated accounting. o The case where a dynticks-idle CPU runs an irq handler that invokes call_rcu() is now correctly handled, forcing that CPU out of dynticks-idle mode. o Review comments have been applied (thank you all!!!). For but one example, fixed the dynticks-ordering issue that Manfred pointed out, saving me much debugging. ;-) o Adjusted rcuclassic and rcupreempt to handle dynticks changes. Attached is an updated patch to Classic RCU that applies a hierarchy, greatly reducing the contention on the top-level lock for large machines. This passes 10-hour concurrent rcutorture and online-offline testing on 128-CPU ppc64 without dynticks enabled, and exposes some timekeeping bugs in presence of dynticks (exciting working on a system where "sleep 1" hangs until interrupted...), which were fixed in the 2.6.27 kernel. It is getting more reliable than mainline by some measures, so the next version will be against -tip for inclusion. See also Manfred Spraul's recent patches (or his earlier work from 2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2). We will converge onto a common patch in the fullness of time, but are currently exploring different regions of the design space. That said, I have already gratefully stolen quite a few of Manfred's ideas. This patch provides CONFIG_RCU_FANOUT, which controls the bushiness of the RCU hierarchy. Defaults to 32 on 32-bit machines and 64 on 64-bit machines. If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT, there is no hierarchy. By default, the RCU initialization code will adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable this balancing, allowing the hierarchy to be exactly aligned to the underlying hardware. Up to two levels of hierarchy are permitted (in addition to the root node), allowing up to 16,384 CPUs on 32-bit systems and up to 262,144 CPUs on 64-bit systems. I just know that I am going to regret saying this, but this seems more than sufficient for the foreseeable future. (Some architectures might wish to set CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs. If this becomes a real problem, additional levels can be added, but I doubt that it will make a significant difference on real hardware.) In the common case, a given CPU will manipulate its private rcu_data structure and the rcu_node structure that it shares with its immediate neighbors. This can reduce both lock and memory contention by multiple orders of magnitude, which should eliminate the need for the strange manipulations that are reported to be required when running Linux on very large systems. Some shortcomings: o More bugs will probably surface as a result of an ongoing line-by-line code inspection. Patches will be provided as required. o There are probably hangs, rcutorture failures, &c. Seems quite stable on a 128-CPU machine, but that is kind of small compared to 4096 CPUs. However, seems to do better than mainline. Patches will be provided as required. o The memory footprint of this version is several KB larger than rcuclassic. A separate UP-only rcutiny patch will be provided, which will reduce the memory footprint significantly, even compared to the old rcuclassic. One such patch passes light testing, and has a memory footprint smaller even than rcuclassic. Initial reaction from various embedded guys was "it is not worth it", so am putting it aside. Credits: o Manfred Spraul for ideas, review comments, and bugs spotted, as well as some good friendly competition. ;-) o Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers, Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton for reviews and comments. o Thomas Gleixner for much-needed help with some timer issues (see patches below). o Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos, Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines alive despite my heavy abuse^Wtesting. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16powerpc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Introduce ppc_pci_flags accessorsJosh Boyer
Currently there are a number of platforms that open code access to the ppc_pci_flags global variable. However, that variable is not present if CONFIG_PCI is not set, which can lead to a build break. This introduces a number of accessor functions that are defined to be empty in the case of CONFIG_PCI being disabled. The various platform files in the kernel are updated to use these. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/pseries: Check for GIQ indicator before calling set-indicatorNathan Lynch
Since "Factor out cpu joining/unjoining the GIQ" (b4963255ad5a426f04a0bb15c4315fa4bb40cde9) the WARN_ON in xics_set_cpu_giq() is being triggered during boot on JS20 because the GIQ indicator is not available on that platform. While the warning is harmless and the system runs normally, it's nicer to check for the existence of the indicator before trying to manipulate it. Implement rtas_indicator_present(), which searches the /rtas/rtas-indicators property for the given indicator token, and use this function in xics_set_cpu_giq(). Also use a WARN statement in xics_set_cpu_giq to get better information on failure. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/powermac: Use set_hard_smp_processor_id() instead of smp_hw_indexNathan Lynch
The hard_smp_processor_id functions are the appropriate interfaces for managing physical CPU ids. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Add sub-match id modalias supportGeert Uytterhoeven
commit 059e4938f8b060b10c4352e6c45739473bc73267 ("powerpc/ps3: Add a sub-match id to ps3_system_bus") forgot to update the module alias support: - Add the sub-match ids to the module aliases, so udev can distinguish between different types of sub-devices. - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb binds to the "FB" sub-device. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Quiet dmesg outputGeoff Levand
Change the debug message in dma_sb_region_create() from pr_info() to DBG() to quiet the dmesg output. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/chrp: Add missing of_node_put in pci.cNicolas Palix
of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code or when the device node is no longer used. The semantic match that catches the bug is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression struct device_node *n; position p1, p2; statement S1,S2; expression E,E1; expression *ptr != NULL; @@ ( if (!(n@p1 = of_find_node_by_name(...))) S1 | n@p1 = of_find_node_by_name(...) ) <... when != of_node_put(n) when != if (...) { <+... of_node_put(n) ...+> } when != true !n || ... when != n = E when != E = n if (!n || ...) S2 ...> ( return \(0\|<+...n...+>\|ptr\); | return@p2 ...; | n = E1 | E1 = n ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Nicolas Palix <npalix@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-16powerpc/cell/axon-msi: Fix MSI after kexecArnd Bergmann
Commit d015fe995 'powerpc/cell/axon-msi: Retry on missing interrupt' has turned a rare failure to kexec on QS22 into a reproducible error, which we have now analysed. The problem is that after a kexec, the MSIC hardware still points into the middle of the old ring buffer. We set up the ring buffer during reboot, but not the offset into it. On older kernels, this would cause a storm of thousands of spurious interrupts after a kexec, which would most of the time get dropped silently. With the new code, we time out on each interrupt, waiting for it to become valid. If more interrupts come in that we time out on, this goes on indefinitely, which eventually leads to a hard crash. The solution in this commit is to read the current offset from the MSIC when reinitializing it. This now works correctly, as expected. Reported-by: Dirk Herrendoerfer <d.herrendoerfer@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-13cpumask: make irq_set_affinity() take a const struct cpumaskRusty Russell
Impact: change existing irq_chip API Not much point with gentle transition here: the struct irq_chip's setaffinity method signature needs to change. Fortunately, not widely used code, but hits a few architectures. Note: In irq_select_affinity() I save a temporary in by mangling irq_desc[irq].affinity directly. Ingo, does this break anything? (Folded in fix from KOSAKI Motohiro) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: jeremy@xensource.com Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and ↵Rusty Russell
cpulist_scnprintf to take pointers. Impact: change calling convention of existing cpumask APIs Most cpumask functions started with cpus_: these have been replaced by cpumask_ ones which take struct cpumask pointers as expected. These four functions don't have good replacement names; fortunately they're rarely used, so we just change them over. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: mingo@redhat.com Cc: tony.luck@intel.com Cc: ralf@linux-mips.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: cl@linux-foundation.org Cc: srostedt@redhat.com
2008-12-04Merge branch 'master' into nextJames Morris
Conflicts: fs/nfsd/nfs4recover.c Manually fixed above to use new creds API functions, e.g. nfs4_save_creds(). Signed-off-by: James Morris <jmorris@namei.org>
2008-12-03powerpc/85xx: Don't reset the MPIC for CAMP mode on MPC8572DSHaiying Wang
The flag MPIC_WANTS_RESET shouldn't be set if we are doing cooperative asymmetric MP. The second linux shouldn't reset the pic or the first one gets very confused. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/86xx: Basic GPIO support for GE Fanuc SBC610Martyn Welch
Basic support for the GPIO available on the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds basic support for the GPIO in the devices I/O FPGA, the GPIO functionality is exposed through the AFIX pins on the backplane, unless used by an AFIX card. This code currently does not support switching between totem-pole and open-drain outputs (when used as outputs, GPIOs default to totem-pole). The interrupt capabilites of the GPIO lines is also not currently supported. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Fix compile warnings in mpc85xx_mds.cKumar Gala
arch/powerpc/platforms/85xx/mpc85xx_mds.c: In function 'board_fixups': arch/powerpc/platforms/85xx/mpc85xx_mds.c:244: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' arch/powerpc/platforms/85xx/mpc85xx_mds.c:250: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Add support for SMP initializationKumar Gala
Added 85xx specifc smp_ops structure. We use ePAPR style boot release and the MPIC for IPIs at this point. Additionally added routines for secondary cpu entry and initializtion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03Merge branch 'merge'Paul Mackerras
2008-12-01powerpc/cell: Fix GDB watchpoints, againArnd Bergmann
An earlier patch from Jens Osterkamp attempted to fix GDB watchpoints by enabling the DABRX register at boot time. Unfortunately, this did not work on SMP setups, where secondary CPUs were still using the power-on DABRX value. This introduces the same change for secondary CPUs on cell as well. Reported-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Tested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-01powerpc/cell/axon-msi: Retry on missing interruptArnd Bergmann
The MSI capture logic for the axon bridge can sometimes lose interrupts in case of high DMA and interrupt load, when it signals an MSI interrupt to the MPIC interrupt controller while we are already handling another MSI. Each MSI vector gets written into a FIFO buffer in main memory using DMA, and that DMA access is normally flushed by the actual interrupt packet on the IOIF. An MMIO register in the MSIC holds the position of the last entry in the FIFO buffer that was written. However, reading that position does not flush the DMA, so that we can observe stale data in the buffer. In a stress test, we have observed the DMA to arrive up to 14 microseconds after reading the register. This patch works around this problem by retrying the access to the FIFO buffer. We can reliably detect the conditioning by writing an invalid MSI vector into the FIFO buffer after reading from it, assuming that all MSIs we get are valid. After detecting an invalid MSI vector, we udelay(1) in the interrupt cascade for up to 100 times before giving up. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24Merge branch 'merge' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs into merge
2008-11-21powerpc/spufs: Fix spinning in spufs_ps_fault on signalJeremy Kerr
Currently, we can end up in an infinite loop if we get a signal while the kernel has faulted in spufs_ps_fault. Eg: alarm(1); write(fd, some_spu_psmap_register_address, 4); - the write's copy_from_user will fault on the ps mapping, and signal_pending will be non-zero. Because returning from the fault handler will never clear TIF_SIGPENDING, so we'll just keep faulting, resulting in an unkillable process using 100% of CPU. This change returns VM_FAULT_SIGBUS if there's a fatal signal pending, letting us escape the loop. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-11-19powerpc/pmac: Use of_find_node_with_property() in pmac_setup_arch()Michael Ellerman
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19powerpc: Use of_find_node_with_property() in cell_iommu_fixed_mapping_init()Michael Ellerman
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19powerpc/ps3: Replace the flip_ctl logic in ps3av and ps3fb by a mutexGeert Uytterhoeven
Introduce ps3_gpu_mutex to synchronizes GPU-related operations, like: - invoking the L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT command using the lv1_gpu_context_attribute() hypervisor call, - handling the PS3AV_CID_AVB_PARAM packet in the PS3 A/V Settings driver. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-14Merge branch 'master' into nextJames Morris
Conflicts: security/keys/internal.h security/keys/process_keys.c security/keys/request_key.c Fixed conflicts above by using the non 'tsk' versions. Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Pass credentials through dentry_open()David Howells
Pass credentials through dentry_open() so that the COW creds patch can have SELinux's flush_unauthorized_files() pass the appropriate creds back to itself when it opens its null chardev. The security_dentry_open() call also now takes a creds pointer, as does the dentry_open hook in struct security_operations. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the PowerPC archDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: James Morris <jmorris@namei.org>