aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev/dart_iommu.c
AgeCommit message (Collapse)Author
2008-07-25powerpc/pseries: iommu enablement for CMORobert Jennings
To support Cooperative Memory Overcommitment (CMO), we need to check for failure from some of the tce hcalls. These changes for the pseries platform affect the powerpc architecture; patches for the other affected platforms are included in this patch. pSeries platform IOMMU code changes: * platform TCE functions must handle H_NOT_ENOUGH_RESOURCES errors and return an error. Architecture IOMMU code changes: * Calls to ppc_md.tce_build need to check return values and return DMA_MAPPING_ERROR for transient errors. Architecture changes: * struct machdep_calls for tce_build*_pSeriesLP functions need to change to indicate failure. * all other platforms will need updates to iommu functions to match the new calling semantics; they will return 0 on success. The other platforms default configs have been built, but no further testing was performed. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/dma: Use the struct dma_attrs in iommu codeMark Nelson
Update iommu_alloc() to take the struct dma_attrs and pass them on to tce_build(). This change propagates down to the tce_build functions of all the platforms. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-02-13[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-17[POWERPC] Fix section mismatch in dart_iommu.cStephen Rothwell
These functions are only called from __init functions. WARNING: vmlinux.o(.text+0x398f4): Section mismatch: reference to .init.text:.lmb_alloc (between '.iommu_init_early_dart' and '.pci_dma_bus_setup_dart') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] DART iommu suspendJohannes Berg
This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09[POWERPC] Create and use set_pci_dma_opsStephen Rothwell
This will allow us to build without PCI easier. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Cell iommu supportJeremy Kerr
This patch adds full cell iommu support (and iommu disabled mode). It implements mapping/unmapping of iommu pages on demand using the standard powerpc iommu framework. It also supports running with iommu disabled for machines with less than 2GB of memory. (The default is off in that case, though it can be forced on with the kernel command line option iommu=force). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Refactor 64 bits DMA operationsBenjamin Herrenschmidt
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Use 4kB iommu pages even on 64kB-page systemsLinas Vepstas
The 10Gigabit ethernet device drivers appear to be able to chew up all 256MB of TCE mappings on pSeries systems, as evidenced by numerous error messages: iommu_alloc failed, tbl c0000000010d5c48 vaddr c0000000d875eff0 npages 1 Some experimentation indicates that this is essentially because one 1500 byte ethernet MTU gets mapped as a 64K DMA region when the large 64K pages are enabled. Thus, it doesn't take much to exhaust all of the available DMA mappings for a high-speed card. This patch changes the iommu allocator to work with its own unique, distinct page size. Although the patch is long, its actually quite simple: it just #defines a distinct IOMMU_PAGE_SIZE and then uses this in all the places that matter. As a side effect, it also dramatically improves network performance on platforms with H-calls on iommu translation inserts/removes (since we no longer call it 16 times for a 1500 bytes packet when the iommu HW is still 4k). In the future, we might want to make the IOMMU_PAGE_SIZE a variable in the iommu_table instance, thus allowing support for different HW page sizes in the iommu itself. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13[POWERPC] Fix G5 DART (IOMMU) race causing occasional data corruptionBenjamin Herrenschmidt
It seems that the occasional data corruption observed with the tg3 driver wasn't due to missing barriers after all, but rather seems to be due to the DART (= IOMMU) in the U4 northbridge reading stale IOMMU table entries from memory due to a race. This fixes it by making the CPU read the entry back from memory before using it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[POWERPC] U4 DART improvementsOlof Johansson
Better late than never... Respin based on previous comment. Only remaining issue last time was an extra mb() that I've taken out. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15[POWERPC] node local IOMMU tablesAnton Blanchard
Allocate IOMMU tables local to the relevant node. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-21[PATCH] powerpc: Lower threshold for DART enablement to 1GBOlof Johansson
Turn on the DART already at 1GB. This is needed because of crippled devices in some systems, i.e. Airport Extreme cards, only supporting 30-bit DMA addresses. Otherwise, users with between 1 and 2GB of memory will need to manually enable it with iommu=force, and that's no good. Some simple performance tests show that there's a slight impact of enabling DART, but it's in the 1-3% range (kernel build with disk I/O as well as over NFS). iommu=off can still be used for those who don't want to deal with the overhead (and don't need it for any devices). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10Merge ../powerpc-mergePaul Mackerras
2006-02-08[PATCH] fix iomem annotations in dart_iommuAl Viro
it's int __iomem *, not int * __iomem... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] powerpc: Always panic if lmb_alloc() failsMichael Ellerman
Currently most callers of lmb_alloc() don't check if it worked or not, if it ever does weird bad things will probably happen. The few callers who do check just panic or BUG_ON. So make lmb_alloc() panic internally, to catch bugs at the source. The few callers who did check the result no longer need to. The only caller that did anything interesting with the return result was careful_allocation(). For it we create __lmb_alloc_base() which _doesn't_ panic automatically, a little messy, but passable. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: minor dart driver cleanupOlof Johansson
Rpn is assigned every time in the loop, no need to increase it too. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Fix g5 DART initBenjamin Herrenschmidt
The patch enabling the new G5's with U4 broke initialization of the DART driver, causing it to trigger a BUG_ON for a case that is actually valid. This patch fixes it: Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Experimental support for new G5 Macs (#2)Benjamin Herrenschmidt
This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>