aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-01-23[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dtsWade Farnsworth
Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdataScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RDB - Add NOR flash to the device tree.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RBD add NAND to device treeScott Wood
Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 82xx: Embedded Planet EP8248E supportScott Wood
This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500Dale Farnsworth
The e500 MMU init code previously assumed KERNELBASE always equaled PAGE_OFFSET and PHYSICAL_START was 0. This is useful for kdump support as well as asymetric multicore. For the initial kdump support the secondary kernel will run at 32M but need access to all of memory so we bump the initial TLB up to 64M. This also matches with the forth coming ePAPR spec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.Scott Wood
Don't depend on the reg property as a way to determine the base of the immr space. The reg property might be defined differently for different SoC families. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Update MPC8610 HPCD to support audio driversTimur Tabi
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add IPIC Kconfig optionJohn Rigby
IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add support for mpc512x interrupts to ipicJohn Rigby
Added ipic_info entries for vectors used by 512x that were previously unused by 83xx. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix carry bug in 128-bit unsigned integer addingLiu Yu
Synchronize it to the definition in include/math-emu/op-4.h for short term. Signed-off-by: Liu Yu <Yu.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: mpc85xx_ads: add in missing of_node_put()Paul Gortmaker
Add in missing of_node_put() after cpm2_pic_init(). This and other coding style cleanups as suggested by Stephen Rothwell. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add support for Freescale QUICCEngine UARTTimur Tabi
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add ability to upload QE firmwareTimur Tabi
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] fsl_soc: add support to gianfar for fixed-link propertyVitaly Bordug
fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO busVitaly Bordug
...thus use fixed-link to register proper "Fixed PHY" Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: introduce localbus and pata nodesAnton Vorontsov
This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: USB device tree cleanupsLi Yang
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Add MPC837x USB platform supportLi Yang
Add chip specific and board specific initialization for MPC837x USB. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: add device trees for MPC837x MDS boardLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix incorrect interrupt map on FSL reference boardsKumar Gala
The ULI based boards had the interrupt maps for USB on the ULI incorrectly set. Also, the MPC8572DS was missing the interrupt-map-mask for the 3rd PCIe controller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_aliasKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_aliasKumar Gala
Add the ability to set the mac address given the alias for the device. Removes the need for having a linux,network-index property. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: convert boards to use machine_device_initcallKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: convert boards to use machine_device_initcallKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fixup use of phys_addr_t in mpic codeBecky Bruce
The mpic_map() and __mpic_map_mmio() need to use phys_addr_t for the physical address they are passed. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Remove update_bridge_resourceKumar Gala
The 85xx/86xx pci code no longer uses update_bridge_resource and it was the only caller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xxKumar Gala
The current PCI code for Freescale 85xx/86xx was treating the virtual P2P PCIe bridge as a transparent bridge. Rather than doing that fixup the virtual P2P bridge by copying the resources from the PHB. Also, fixup a bit of the code for dealing with resource_size_t being 64-bits and how we set ATMU registers for >4G. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fixup transparent P2P resourcesKumar Gala
For transparent P2P bridges the first 3 resources may get set from based on BAR registers and need to get fixed up. Where as the remainder come from the parent bus and have already been fixed up. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resourcesKumar Gala
The fixup code that handles the case for PowerMac's that leave bridge windows open over an inaccessible region should only be applied to memory resources (IORESOURCE_MEM). If not we can get it trying to fixup IORESOURCE_IO on some systems since the other conditions that are used to detect the case can easily match for IORESOURCE_IO. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix handling of memreserve if the range lands in highmemKumar Gala
There were several issues if a memreserve range existed and happened to be in highmem: * The bootmem allocator is only aware of lowmem so calling reserve_bootmem with a highmem address would cause a BUG_ON * All highmem pages were provided to the buddy allocator Added a lmb_is_reserved() api that we now use to determine if a highem page should continue to be PageReserved or provided to the buddy allocator. Also, we incorrectly reported the amount of pages reserved since all highmem pages are initally marked reserved and we clear the PageReserved flag as we "free" up the highmem pages. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25
2008-01-17[POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Check that the syscall table matches the syscall numbersStephen Rothwell
Also check that __NR_syscalls has been updated appropriately. Hopefully this will catch any out of order additions to the table in the future. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add hugepagesz boot-time parameterJon Tollefson
This adds the hugepagesz boot-time parameter for ppc64. It lets one pick the size for huge pages. The choices available are 64K and 16M when the base page size is 4k. It defaults to 16M (previously the only only choice) if nothing or an invalid choice is specified. Tested 64K huge pages successfully with the libhugetlbfs 1.2. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] arch/powerpc/kernel: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] cell: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] powermac: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Update .gitignore filesJochen Friedrich
Update .gitignore as needed by dtc addition. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] pci_32.c: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] eeh.c: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] iSeries: eliminate pci_dn bussubnoStephen Rothwell
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store that value (instead of the BAR number) when we allocate the device bars. This is not a fast path, so we can look up the device_node property there instead of using the bussubno field of the pci_dn. The other user of iseries_ds_addr() was already scanning the device tree, so looking up a property will not slow it down any more. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn pcidev is only used by EEHStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/platforms/powermacCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/kernelCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/sysdevCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add of_find_matching_node() helper functionGrant Likely
Similar to of_find_compatible_node(), of_find_matching_node() and for_each_matching_node() allow you to iterate over the device tree looking for specific nodes, except that they take of_device_id tables instead of strings. This also moves of_match_node() from driver/of/device.c to driver/of/base.c to colocate it with the of_find_matching_node which depends on it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-15[POWERPC] pasemi: Move electra-ide to pata_of_platformOlof Johansson
Move electra-ide glue over to the new pata_of_platform framework, and add the quirks needed to that driver. Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 15:33:03 +0000