aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2006-03-16powerpc: update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: properly configure DDR/P5IOC children devsJohn Rose
The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: remove duplicate EXPORT_SYMBOLSOlaf Hering
remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: RTC memory corruptionMichael Neuling
We should be memset'ing the data we are pointing to, not the pointer itself. This is in an error path so we probably don't hit it much. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: enable NAP only on cpus who support it to avoid memory ↵Benjamin Herrenschmidt
corruption This patch fixes incorrect setting of powersave_nap to 1 on all PowerMacs, potentially causing memory corruption on some models. This bug was introuced by me during the 32/64 bits merge. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig optionMichael Ellerman
The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a kernel that can be used _as_ the kdump kernel, not a kernel that can boot into a kdump kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105Olaf Hering
Enable the onboard IDE driver for p610, p615 and p630. They have the CD connected to this card. All other RS/6000 systems with this controller have no connectors and dont need this option. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: correct cacheflush loop in zImageOlaf Hering
Correct the loop for cacheflush. No idea where I copied the code from, but the original does not work correct. Maybe the flush is not needed. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16powerpc: Fix problem with time going backwardsPaul Mackerras
The recent changes to keep gettimeofday in sync with xtime had the side effect that it was occasionally possible for the time reported by gettimeofday to go back by a microsecond. There were two reasons: (1) when we recalculated the offsets used by gettimeofday every 2^31 timebase ticks, we lost an accumulated fractional microsecond, and (2) because the update is done some time after the notional start of jiffy, if ntp is slowing the clock, it is possible to see time go backwards when the timebase factor gets reduced. This fixes it by (a) slowing the gettimeofday clock by about 1us in 2^31 timebase ticks (a factor of less than 1 in 3.7 million), and (b) adjusting the timebase offsets in the rare case that the gettimeofday result could possibly go backwards (i.e. when ntp is slowing the clock and the timer interrupt is late). In this case the adjustment will reduce to zero eventually because of (a). Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-14powerpc: Disallow lparcfg being a modulePaul Mackerras
The lparcfg code needs several things which are pretty arcane internal details and which we don't want to export, which means that lparcfg doesn't work when built as a module. This makes it a bool instead of a tristate in the Kconfig so that users can't try to build it as a module. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix various syscall/signal/swapcontext bugs [PATCH] powerpc: incorrect rmo_top handling in prom_init [PATCH] powerpc: Fix incorrect pud_ERROR() message [PATCH] powerpc: Expose SMT and L1 icache snoop userland features [PATCH] powerpc: Fix windfarm_pm112 not starting all control loops [PATCH] powerpc: Fix old g5 issues with windfarm powerpc32: Fix timebase synchronization on 32-bit powermacs powerpc: Turn off verbose debug output in powermac platform functions powerpc: Fix might-sleep warning in program check exception handler
2006-03-08powerpc: Fix various syscall/signal/swapcontext bugsPaul Mackerras
A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-04ppc64: make sure to align stack pointer to 16 bytes at bootLinus Torvalds
yaboot is scrogged and calls us with an invalid stack alignment, it seems. Thanks to David Woodhouse to pointing me to the problem. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-03[PATCH] powerpc: incorrect rmo_top handling in prom_initBenjamin Herrenschmidt
On Thu, 2006-03-02 at 19:55 +0100, Olaf Hering wrote: > My iBook1 has 2 memory regions in reg. Depending on how I boot it > (vmlinux+initrd) or zImage.initrd, it will not boot with current Linus > tree. > rmo_top should be 160MB instead of 32MB. On logically-partitioned machines the first element of the reg property in the memory node is defined to be the "RMO" region, i.e. the memory that the processor can access in real mode. On other machines the first element has no special meaning, so only take it to be the RMO region on LPAR machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03[PATCH] powerpc: Expose SMT and L1 icache snoop userland featuresBenjamin Herrenschmidt
This patch makes userland aware of the icache snoop capability of the POWER5 (and possibly others in the future) and of SMT capabilities. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03powerpc32: Fix timebase synchronization on 32-bit powermacsPaul Mackerras
The variable `timebase' used to transfer the current timebase value from one cpu to the other in smp_core99_give/take_timebase was only an unsigned long, i.e. 32 bits on 32-bit machines. It needs to be 64 bits. This makes it a u64, and fixes the issue reported by Kyle Moffett, that the two cpus see wildly different values for the time of day. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03powerpc: Turn off verbose debug output in powermac platform functionsPaul Mackerras
This is along the lines suggested by Chris Lumens but goes further in that it leaves the DEBUG symbol undefined, making the DBG macro empty. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03powerpc: Fix might-sleep warning in program check exception handlerPaul Mackerras
On 32-bit, the exception prolog for the program check exception doesn't enable interrupts early on. If it is an illegal instruction exception, we read the instruction in order to emulate certain instructions, and the get_user of the instruction triggers a WARN_ON since interrupts are still disabled. This adds a local_irq_enable() to enable interrupts before reading the instruction. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] Add mm->task_size and fix powerpc vdsoBenjamin Herrenschmidt
This patch adds mm->task_size to keep track of the task size of a given mm and uses that to fix the powerpc vdso so that it uses the mm task size to decide what pages to fault in instead of the current thread flags (which broke when ptracing). (akpm: I expect that mm_struct.task_size will become the way in which we finally sort out the confusion between 32-bit processes and 32-bit mm's. It may need tweaks, but at this stage this patch is powerpc-only.) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] powerpc/iseries: Fix double phys_to_abs bug in htab_bolt_mappingMichael Ellerman
Before the merge I updated create_pte_mapping() to work for iSeries, by calling iSeries_hpte_bolt_or_insert. (4c55130b2aa93370f1bf52d2304394e91cf8ee39) Later we changed iSeries_hpte_insert to cope with the bolting case, and called that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping) (3c726f8dee6f55e96475574e9f645327e461884c). Unfortunately that change introduced a subtle bug, where we pass an absolute address to iSeries_hpte_insert() where it expects a physical address. This leads to us calling phys_to_abs() twice on the physical address, which is seriously bogus. This only causes a problem if the absolute address from the first translation can be looked up again in the chunk_map, which depends on the size and layout of memory. I've seen it fail on one box, but not others. The minimal fix is to pass the physical address to iSeries_hpte_insert(). For 2.6.17 we should make phys_to_abs() BUG if we try to double-translate an address. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: fix NULL pointer in handle_eeh_eventsOlaf Hering
This patch fixes a crash in handle_eeh_events, but ethtool -t still doesnt work right. ... pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0] pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c sp: c00000005192be60 msr: 9000000000009032 dar: 268 dsisr: 40000000 current = 0xc0000001fe7bf1a0 paca = 0xc00000000048b280 pid = 16322, comm = eehd enter ? for help [c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130 [c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68 ... (none):/# /usr/sbin/ethtool -i eth0 driver: e100 version: 3.5.10-k2-NAPI firmware-version: N/A bus-info: 0000:21:01.0 (none):/# /usr/sbin/ethtool -t eth0 Call Trace: [C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138 [C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4 [C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260 [C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220 [C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c [C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8 [C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740 [C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404 [C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108 [C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510 [C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94 [C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150 [C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc [C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40 EEH: Detected PCI bus error on device 0000:21:01.0 EEH: This PCI device has failed 1 times since last reboot: <NULL> - modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory Cannot get strings: No such device (none):/# (none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 (none):/# Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> and so on Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: vdso 64bits gettimeofday bugBenjamin Herrenschmidt
A bug in the assembly code of the vdso can cause gettimeofday() to hang or to return incorrect results. The wrong register was used to test for pending updates of the calibration variables and to create a dependency for subsequent loads. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-28[PATCH] powerpc: fix dynamic PCI probe regressionJohn Rose
Some hotplug driver functions were migrated to the kernel for use by EEH in commit 2bf6a8fa21570f37fd1789610da30f70a05ac5e3. Previously, the PCI Hotplug module had been changed to use the new OFDT-based PCI probe when appropriate: 5fa80fcdca9d20d30c9ecec30d4dbff4ed93a5c6 When rpaphp_pci_config_slot() was moved from the rpaphp driver to the new kernel function pcibios_add_pci_devices(), the OFDT-based probe stuff was dropped. This patch restores it. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-26Make Kprobes depend on modulesLinus Torvalds
Commit 9ec4b1f356b3bad928ae8e2aa9caebfa737d52df made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24[PATCH] powerpc: Fix mem= cmdline handling on arch/powerpc for !MULTIPLATFORMKumar Gala
mem= command line option was being ignored in arch/powerpc if we were not a CONFIG_MULTIPLATFORM (which is handled via prom_init stub). The initial command line extraction and parsing needed to be moved earlier in the boot process and have code to actual parse mem= and do something about it. Also, fixed a compile warning in the file. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24[PATCH] powerpc: Don't re-assign PCI resources on MapleSegher Boessenkool
Maple firmware does not need PCI resource allocation, and in fact, it can cause problems in some strange cases. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Fix some MPIC + HT APIC bugletsSegher Boessenkool
Do disable, not enable, the HT APIC IRQ in the function that is supposed to. Enable the MPIC IRQ before enabling the downstream APIC IRQ, avoids potentially losing an interrupt. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfigOlof Johansson
Update defconfigs for g5, pseries and generic ppc64. Default choices for everything, with the following exceptions: * Enable WINDFARM_PM112 on g5 and ppc64. * Increase CONFIG_NR_CPUS to 4 in g5_defconfig * CONFIG_TIGON3=y instead of =m in g5_defconfig Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc64: remove broken/bitrotted HMT supportAnton Blanchard
HMT support is currently broken and needs to be reworked to play nicely with the SMT scheduler. Remove the bit rotten bits for the time being. I also updated an incorrect comment, we enter __secondary_hold with the physical cpu id in r3. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Fix runlatch performance issuesAnton Blanchard
The runlatch SPR can take a lot of time to write. My original runlatch code would set it on every exception entry even though most of the time this was not required. It would also continually set it in the idle loop, which is an issue on an SMT capable processor. Now we cache the runlatch value in a threadinfo bit, and only check for it in decrementer and hardware interrupt exceptions as well as the idle loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc64: fix spinlock recursion in native_hpte_clearR Sharada
native_hpte_clear has a spinlock recursion problem with the native_tlbie_lock being called twice, once in native_hpte_clear() and once within tlbie(). Fix the problem by changing the call to tlbie() in native_hpte_clear() to __tlbie(). It still supports only 4k pages for now. Signed-off-by: R Sharada <sharada@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: disable OProfile for iSeriesKelly Daly
Disable OProfile in Kconfig for iSeries to prevent hangs. OProfile was not originally intended to work with legacy iSeries. Signed-off-by: Kelly Daly <kelly@au.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: fix altivec_unavailable_exception OopsesAlan Curry
altivec_unavailable_exception is called without setting r3... it looks like the r3 that actually gets passed in as struct pt_regs *regs is the undisturbed value of r3 at the time the altivec instruction was encountered. The user actually gets to choose the pt_regs printed in the Oops! This fixes the oops by passing the correct pt_regs pointer to altivec_unavailable_exception. Signed-off-by: Alan Curry <pacman@TheWorld.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Trivial fix to set the proper timeout value for kdumpHaren Myneni
The panic CPU is waiting forever due to some large timeout value if some CPU is not responding to an IPI. This patch fixes the problem - the maximum waiting period will be 10 seconds and then the kdump boot will go ahead. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24[PATCH] powerpc: Only calculate htab_size in one place for kexecMichael Ellerman
For kexec we need to know the size of the MMU hash table. Currently we calculate the size once in the htab code, and then twice more in the kexec code, once using htab_hash_mask and once using ppc64_pft_size. On some machines the ppc64_pft_size calculation is broken because ppc64_pft_size is not set. So we need to fix the second calculation, but better still we should just calculate the size once and use it everywhere else. Tested on Power5 LPAR, Power4 non-LPAR and Power3. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23[PATCH] powerpc: Initialise hvlpevent_queue.lock correctlyMichael Ellerman
When I changed the hvlpevent_queue code to use a spinlock instead of a custom atomic (719d1cd86780c156f954fc34f34481adac197aec) I didn't initialise the lock anywhere, oops. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-02-20[PATCH] powermac: Fix loss of ethernet PHY on sleepBenjamin Herrenschmidt
Some recent PowerBook models tend to lose the ethernet PHY on suspend/resume. It -seems- that they use a combo ethernet-firewire PHY chip and the firewire PHY seems to die the same way when that happens. Not trying to toggle the firewire cable power appears to fix it. So this patch disables changes to the firewire cable power control GPIO on those models. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] powerpc: Fix bug in spinup of renumbered secondary threadsMichael Ellerman
If the logical and physical cpu ids of a secondary thread don't match, we will fail to spin the thread up on pSeries machines due to a bug in pseries/smp.c We call the RTAS "start-cpu" method with the physical cpu id, the address of pSeries_secondary_smp_init and the value to pass that function in r3. Currently we pass "lcpu", the logical cpu id, but pSeries_secondary_smp_init expects the physical cpu id in r3. We should be passing pcpu instead. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20[PATCH] powerpc: Make UP -> SMP kexec work againMichael Ellerman
For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id in the paca and so they'll jump into kexec_wait, ready for a kexec. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20[PATCH] powerpc: Don't start secondary CPUs in a UP && KEXEC kernelMichael Ellerman
Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll start up the secondary CPUs which will then go beserk and we die. Simple fix is to conditionally call smp_release_cpus() in setup_system(). With that in place we don't need the dummy definition of smp_release_cpus() because all call sites are #ifdef'ed either SMP or KEXEC. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20[PATCH] powerpc: Fix OOPS in lparcfg on G5Olof Johansson
Fallback gracefully when reading /proc/ppc64/lparcfg when the /rtas device node can't be found. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20[PATCH] powerpc: remove duplicate exportsOlaf Hering
A few symbols are exported twice, remove them from ppc_ksyms.c Remove users of sys_ctrler in arch/ppc/ WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20powerpc: Keep xtime and gettimeofday in syncPaul Mackerras
This fixes a regression which was introduced by moving ppc32 to use the same sort of lockless gettimeofday as ppc64 has been using for some time. This involves getting the timebase and performing some simple arithmetic to convert it to seconds and microseconds. However, the factor and offset used there weren't being updated when NTP varied the tick length using adjtimex. 64-bit didn't notice the problem because it had a hook in the 32-bit adjtimex compat routine that attempted to work out what the generic timekeeping code would do and alter the factor and offset to match. However, that code was very complex and it wasn't clear that it still matched what the generic code would do. Now we use the generic current_tick_length() routine that was recently added to check that the current tick will be as long as we expect; if not we recompute the factor and offset. This keeps gettimeofday and xtime in sync. In addition we check that gettimeofday hasn't got ahead of xtime on each timer interrupt; if it has, we resync. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-02-10[PATCH] Fix building external modules on ppc32Andreas Gruenbacher
We are setting up sources for building external modules like this: /usr/src/linux-obj> # create a .config file /usr/src/linux-obj> make -C /usr/src/linux O=$PWD oldconfig /usr/src/linux-obj> make -C /usr/src/linux O=$PWD prepare /usr/src/linux-obj> make -C /usr/src/linux O=$PWD scripts /usr/src/linux-obj> make -C /usr/src/linux O=$PWD clean After that, external modules can be built with: /usr/src/module> make -C /usr/src/linux-obj M=$PWD This fails for ppc32 because the `make clean' removes the arch/powerpc/include directory. This should be done in archmrproper instead of in archclean. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-10[PATCH] powerpc: Add CONFIG_DEFAULT_UIMAGE for embedded boardsKumar Gala
Embedded boards that u-boot require a kernel image in the uImage format. This allows a given board to specify it wants a uImage built by default. This also fixes a warning at config time, as this symbol is referred to in arch/powerpc/platforms/83xx/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10[PATCH] powerpc: unshare system call registrationJANAK DESAI
Registers system call for the powerpc architecture. Signed-off-by: Janak Desai <janak@us.ibm.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10ppc: Use the system call table from arch/powerpc/kernel/systbl.SPaul Mackerras
With this, new system calls only have to be wired up in one place for ARCH=ppc and ARCH=powerpc, rather than 2. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-08[PATCH] fix iomem annotations in dart_iommuAl Viro
it's int __iomem *, not int * __iomem... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>