aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits) ide: remove ide_init_default_irq() macro ide: move default IDE ports setup to ide_generic host driver ide: remove obsoleted "idex=noprobe" kernel parameter (take 2) ide: remove needless hwif->irq check from ide_hwif_configure() ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers ide: limit legacy VLB host drivers to alpha, x86 and mips cmd640: init hwif->{io_ports,irq} explicitly cmd640: cleanup setup_device_ptrs() ide: add ide-4drives host driver (take 3) ide: remove ppc ifdef from init_ide_data() ide: remove ide_default_io_ctl() macro ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2) ppc/pmac: remove no longer needed IDE quirk ppc: don't include <linux/ide.h> ppc: remove ppc_ide_md ppc/pplus: remove ppc_ide_md.ide_init_hwif hook ppc/sandpoint: remove ppc_ide_md hooks ppc/lopec: remove ppc_ide_md hooks ppc/mpc8xx: remove ppc_ide_md hooks ...
2008-04-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-04-18ppc/pmac: remove no longer needed IDE quirkBartlomiej Zolnierkiewicz
IDE PMAC host driver and all IDE PCI host drivers use pci_enable_device() nowadays so the following quirk in pmac_pcibios_after_init() can be removed. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc: remove ppc_ide_mdBartlomiej Zolnierkiewicz
* Add special cases for pplus and prep to ide_default_{irq,io_base}() (+ FIXMEs about the need to use IDE platform host driver instead). * Remove no longer needed ppc_ide_md and struct ide_machdep_calls. * Then remove <linux/ide.h> include from: - arch/powerpc/kernel/setup_32.c - arch/ppc/kernel/ppc_ksyms.c - arch/ppc/kernel/setup.c - arch/ppc/platforms/pplus.c - arch/ppc/platforms/prep_setup.c There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/pmac: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add pmac_ide_init_ports() helper and use it instead of pmac_ide_init_hwif_ports(). * Remove ppc_ide_md hooks - no need for them (IDE pmac host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include from arch/powerpc/platforms/powermac/pmac.h. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17Generic semaphore implementationMatthew Wilcox
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-16phy: Change mii_bus id field to a stringAndy Fleming
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-03[POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet worksRené Bürgel
This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] mpc5200: Amalgamated DTS fixes and updatesBartlomiej Sieka
DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix rtas_flash procfs interfaceMaxim Shchetynin
Handling of the proc_dir_entry->count was changed in 2.6.24-rc5. After this change, the default value for pde->count is 1 and not 0 as before. Therefore, if we want to check whether our procfs file is already opened (already in use), we have to check if pde->count is greater than 2 rather than 1. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix deadlock with mmu_hash_lock in hash_page_syncBenjamin Herrenschmidt
hash_page_sync() takes and releases the low level mmu hash lock in order to sync with other processors disposing of page tables. Because that lock can be needed to service hash misses triggered by interrupt handlers, taking it must be done with interrupts off. However, hash_page_sync() appears to be called with interrupts enabled, thus causing occasional deadlocks. We fix it by making sure hash_page_sync() masks interrupts while holding the lock. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix iSeries hard irq enabling regressionBenjamin Herrenschmidt
A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix CPM2 SCC1 clock initialization.Laurent Pinchart
A missing break statement in a switch caused cpm2_clk_setup() to initialize SCC2 instead of SCC1. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIBKumar Gala
The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sataKim Phillips
as prescribed in Documentation/powerpc/booting-without-of.txt. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigsKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dtsAnton Vorontsov
Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. This patch fixes USB malfunctioning on the MPC837xE-RDB boards. Similar patch has been already applied for the MDS boards: commit 28b958859206b7010d03129611c2e444898e3ee4 Author: Li Yang <leoli@freescale.com> Date: Thu Mar 6 18:42:26 2008 +0800 [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-30powerpc/pseries/xcis: ansifyAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30vma_map: use proper pointer typesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28[POWERPC] Fix missed hardware breakpoints across multiple threadsMichael Ellerman
There is a bug in the powerpc DABR (data access breakpoint) handling, which can result in us missing breakpoints if several threads are trying to break on the same address. The circumstances are that do_page_fault() calls do_dabr(), this clears the DABR (sets it to 0) and sets up the signal which will report to userspace that the DABR was hit. The do_signal() code will restore the DABR value on the way out to userspace. If we reschedule before calling do_signal(), __switch_to() will check the cached DABR value and compare it to the new thread's value, if they match we don't set the DABR in hardware. So if two threads have the same DABR value, and we schedule from one to the other after taking the interrupt for the first thread hitting the DABR, the second thread will run without the DABR set in hardware. The cleanest fix is to move the cache update into set_dabr(), that way we can't forget to do it. Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-25[POWERPC] update pasemi_defconfigOlof Johansson
Disable GEN_RTC since it conflicts with the i2c rtc drivers registering, besides that keep most of the new defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-03-25Merge branch 'linux-2.6' into mergePaul Mackerras
2008-03-25[POWERPC] mpc5200: Fix incorrect compatible string for the mdio nodeGrant Likely
The MDIO node in the lite5200b.dts file needs to also claim compatibility with the older mpc5200 chip. Otherwise the driver won't find the device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] Update some defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-24[POWERPC] Fix Oops with TQM5200 on TQM5200Anatolij Gustschin
The "bestcomm-core" driver defines its of_match table as follows static struct of_device_id mpc52xx_bcom_of_match[] = { { .type = "dma-controller", .compatible = "fsl,mpc5200-bestcomm", }, { .type = "dma-controller", .compatible = "mpc5200-bestcomm", }, {}, }; so while registering the driver, the driver's probe function won't be called, because the device tree node doesn't have a device_type property. Thus the driver's bcom_engine structure won't be allocated. Referencing this structure later causes observed Oops. Checking bcom_eng pointer for NULL before referencing data pointed by it prevents oopsing, but fec driver still doesn't work (because of the lost bestcomm match and resulted task allocation failure). Actually the compatible property exists and should match and so the fec driver should work. This removes .type = "dma-controller" from the bestcomm driver's mpc52xx_bcom_of_match table to solve the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] mpc5200: Fix null dereference if bestcomm fails to initializeGrant Likely
If the bestcomm initialization fails, calls to the task allocate function should fail gracefully instead of oopsing with a NULL deref. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] Fix crash in init_ipic_sysfs on efikaOlaf Hering
The global primary_ipic in arch/powerpc/sysdev/ipic.c can remain NULL if ipic_init() fails, which will happen on machines that don't have an ipic interrupt controller. init_ipic_sysfs() will crash in that case. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] Don't use 64k pages for ioremap on pSeriesPaul Mackerras
On pSeries, the hypervisor doesn't let us map in the eHEA ethernet adapter using 64k pages, and thus the ehea driver will fail if 64k pages are configured. This works around the problem by always using 4k pages for ioremap on pSeries (but not on other platforms). A better fix would be to check whether the partition could ever have an eHEA adapter, and only force 4k pages if it could, but this will do for 2.6.25. This is based on an earlier patch by Tony Breeds. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Hide resources on Axon PCIE root complex nodesMichael Ellerman
The PCI bridge representing the PCIE root complex on Axon, contains device BARs for a memory range and ROM that define inbound accesses. This confuses the kernel resource management code -- the resources need to be hidden when Axon is a host bridge. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix cell IOMMU code to cope with empty dma-ranges and non-PCI devicesMichael Ellerman
The cell IOMMU code to parse the dma-ranges properties, used for the fixed mapping, was broken in two ways for some devices. Firstly it didn't cope with empty dma-ranges properties. An empty property implies no translation so can be safely skipped. The code also wrongly assumed it would be looking at PCI devices, and hard coded the number of address and size cells. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix build failure for tqm8540 and sbc85xx defconfigsPaul Gortmaker
The wrapper script didn't have entries for the TQM8540 board and the SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is 8250 based and not CPM based by looking at its defconfig. There was also a trailing * on the TQM8555 entry that I removed too. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix PMU + soft interrupt disable bugAnton Blanchard
Since the PMU is an NMI now, it can come at any time we are only soft disabled. We must hard disable around the two places we allow the kernel stack SLB and r1 to go out of sync. Otherwise the PMU exception can force a kernel stack SLB into another slot, which can lead to it getting evicted, which can lead to a nasty unrecoverable SLB miss in the exception entry code. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] user_regset PTRACE_SETREGS regression fixRoland McGrath
The PTRACE_SETREGS request was only recently added on powerpc, and gdb does not use it. So it slipped through without getting all the testing it should have had. The user_regset changes had a simple bug in storing to all of the 32-bit general registers block on 64-bit kernels. This bug only comes up with PTRACE_SETREGS, not PPC_PTRACE_SETREGS. It causes a BUG_ON to hit, so this fix needs to go in ASAP. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Fix large hash table allocation on Cell bladesMichael Ellerman
My recent hack to allocate the hash table under 1GB on cell was poorly tested, *cough*. It turns out on blades with large amounts of memory we fail to allocate the hash table at all. This is because RTAS has been instantiated just below 768MB, and 0-x MB are used by the kernel, leaving no areas that are both large enough and also naturally-aligned. For the cell IOMMU hack the page tables must be under 2GB, so use that as the limit instead. This has been tested on real hardware and boots happily. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Export empty_zero_pageTheodore Ts'o
Once again, this time with feeling.... - Ted >From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o <tytso@mit.edu> Date: Wed, 12 Mar 2008 11:50:39 -0400 Subject: Export empty_zero_page The empty_zero_page symbol is exported by most other architectures (s390, ia64, x86, um), and an upcoming ext4 patch needs it because ZERO_PAGE() references empty_zero_page, and we need it to zero out an unitialized extents in ext4 files. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMUTony Breeds
When building arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU we get the following warnings: arch/powerpc/platforms/powermac/pic.c: In function 'pmacpic_find_viaint': arch/powerpc/platforms/powermac/pic.c:623: warning: label 'not_found' defined but not used This fixes it. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Fix bogus test for unassigned PCI resourcesBenjamin Herrenschmidt
A bogus test for unassigned resources that came from our 32-bit PCI code ended up being "merged" by my previous patch series, breaking some 64-bit setups where devices have legal resources ending at 0xffffffff. This fixes it by completely changing the test. We now test for res->start == 0, as the generic code expects, and we also only do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag set, as there are cases of pSeries and iSeries where it could be a valid value and those can't reassign devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Fix zImage-dtb.initrd build errorGrant Likely
The pattern substitution rules were failing when used with zImage-dtb targets. If zImage-dtb.initrd was selected, the pattern substitution would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which caused the build to fail. This renames zImage-dtb to dtbImage to avoid the problem entirely. By not using the zImage prefix then is no potential for namespace collisions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernelsPaul Mackerras
Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-12Merge branch 'master' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs into merge
2008-03-11[POWERPC] spufs: fix rescheduling of non-runnable contextsJeremy Kerr
At present, we can hit the BUG_ON in __spu_update_sched_info by reading the regs file of a context between two calls to spu_run. The spu_release_saved called by spufs_regs_read() is resulting in the (now non-runnable) context being placed back on the run queue, so the next call to spu_run ends up in the bug condition. This change uses the SPU_SCHED_SPU_RUN flag to only reschedule a context if it's still in spu_run(). Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-03-11[POWERPC] spufs: don't (ab)use SCHED_IDLEJeremy Kerr
commit 4ef11014 introduced a usage of SCHED_IDLE to detect when a context is within spu_run. Instead of SCHED_IDLE (which has other meaning), add a flag to sched_flags to tell if a context should be running. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-03-10[POWERPC] QE: Make qe_get_firmware_info reentrantIonut Nicu
The function was returning NULL the second time it was called if the firmware was uploaded from the boot loader or the first time it was called if the firmware was uploaded from the kernel. Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-10[POWERPC] 83xx: Make 83xx perfmon support selectableAndy Fleming
Not all e300 cores support the performance monitors, and the ones that don't will be confused by the mf/mtpmr instructions. This allows the support to be optional, so the 8349 can turn it off while the 8379 can turn it on. Sadly, those aren't config options, so it will be left to the defconfigs and the users to make that determination. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-07[POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt mapJeremy McNicoll
The following patch allows interrupts to occur on the sbc8548. Currently PCI and PCI-X devices get assigned an IRQ but the interrupt count never increases. This solves the problem and adds PCI support as well. Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-07[POWERPC] QE: Fix QE firmware uploading limitTimur Tabi
Fix a typo in qe_upload_firmware() that prevented uploading firmware on systems with more than one RISC core. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-07[POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.Scott Wood
This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-07[POWERPC] 8xx: fix swapVitaly Bordug
This makes swap routines operate correctly on the ppc_8xx based machines. Code has been revalidated on mpc885ads (8M sdram) with recent kernel. Based on patch from Yuri Tikhonov <yur@emcraft.com> to do the same on arch/ppc instance. Recent kernel's size makes swap feature very important on low-memory platforms, those are actually non-operable without it. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>