aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-07-22powerpc/mpc5200: Make mpc5200 GPIO driver select the GENERIC_GPIO configGrant Likely
CONFIG_GENERIC_GPIO is needed for the gpio driver to work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-22powerpc/mpc5200: Remove fsl-soc.c from mpc5200 build, it is not needed.Jon Smirl
Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-22Merge commit 'origin/master'Benjamin Herrenschmidt
Manually fixed up: drivers/net/fs_enet/fs_enet-main.c
2008-07-21sysdev: Pass the attribute to the low level sysdev show/store functionAndi Kleen
This allow to dynamically generate attributes and share show/store functions between attributes. Right now most attributes are generated by special macros and lots of duplicated code. With the attribute passed it's instead possible to attach some data to the attribute and then use that in shared low level functions to do different things. I need this for the dynamically generated bank attributes in the x86 machine check code, but it'll allow some further cleanups. I converted all users in tree to the new show/store prototype. It's a single huge patch to avoid unbisectable sections. Runtime tested: x86-32, x86-64 Compiled only: ia64, powerpc Not compile tested/only grep converted: sh, arm, avr32 Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21driver core: fix a lot of printk usages of bus_idGreg Kroah-Hartman
We have the dev_printk() variants for this kind of thing, use them instead of directly trying to access the bus_id field of struct device. This is done in order to remove bus_id entirely. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22powerpc: Fix build bug with binutils < 2.18 and GCC < 4.2Segher Boessenkool
binutils < 2.18 has a bug that makes it misbehave when taking an ELF file with all segments at load address 0 as input. This happens when running "strip" on vmlinux, because of the AT() magic in this linker script. People using GCC >= 4.2 won't run into this problem, because the "build-id" support will put some data into the "notes" segment (at a non-zero load address). To work around this, we force some data into both the "dummy" segment and the kernel segment, so the dummy segment will get a non-zero load address. It's not enough to always create the "notes" segment, since if nothing gets assigned to it, its load address will be zero. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Tested-By: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/eeh: Don't panic when EEH_MAX_FAILS is exceededMike Mason
This patch changes the EEH_MAX_FAILS action from panic to printing an error message. Panicking under under this condition is too harsh. Although performance will be affected and the device may not recover, the system is still running, which at the very least should allow for a more graceful shutdown. The patch also removes the msleep() within a spinlock, which can lead to a deadlock and is not recommended. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/cell: Add DMA_ATTR_WEAK_ORDERING dma attribute and use in Cell IOMMU ↵Mark Nelson
code Introduce a new dma attriblue DMA_ATTR_WEAK_ORDERING to use weak ordering on DMA mappings in the Cell processor. Add the code to the Cell's IOMMU implementation to use this code. Dynamic mappings can be weakly or strongly ordered on an individual basis but the fixed mapping has to be either completely strong or completely weak. This is currently decided by a kernel boot option (pass iommu_fixed=weak for a weakly ordered fixed linear mapping, strongly ordered is the default). Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Indicate which oprofile counters to use while in compat modeTorez Smith
While running on a system with new hardware and a kernel where the cpu_specs[] table does not recognize the new hardware, the identify_cpu() routine will select the default case as it searches through cpu_specs[] in an attempt to match the real PVR. Once the default case is selected, non of the oprofile counters and/or fields have been set up or defined. When identify_cpu() is called once more with the logical PVR, some of the cpu specific fields are replaced with the exception of the oprofile related ones. However, in the case where we have actually taken the default case while searching for the real PVR, we need to tell oprofile that we are now running in compatibility mode so it can pick up the correct counters. We do this by setting the oprofile_cpu_type field to be that taken from the cpu_specs[] for the cpu we are now emulating. This change will detect that we are now altering the real PVR and determine if we also need to update the oprofile_cpu_type field. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/boot: Change spaces to tabsAdrian Bunk
For C code spaces versus tabs is just a religious issue, but for Makefiles it actually matters. This patch fixes he following errors: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator. Stop. /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator. Stop. Since this was inside an ifdef DTC_GENPARSER it was not a problem unless someone wanted to regenerate the shipped generated files. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Remove duplicate 6xx option in KconfigAdrian Bunk
The real option is above in the same Kconfig file. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Use PPC_LONG and PPC_LONG_ALIGN in lib/string.SMichael Ellerman
Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros for readability. No change to the generated code. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Fix OF parsing of 64 bits PCI addressesBenjamin Herrenschmidt
The OF parsing code for PCI addresses isn't always treating properly the address space indication 0b11 (ie. 0x3) as meaning 64 bits memory space. This means that it fails to parse addresses for PCI BARs that have this encoding set by the firmware, which happens on some SLOF versions and breaks offb palette handling on Powerstation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
2008-07-22powerpc: Use WARN_ON(1) instead of __WARN()Michael Ellerman
__WARN() is not defined for all configs, use WARN_ON(1) instead. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Fix support for latencytopArnd Bergmann
We need to pass the kernel stack pointer instead of the user space stack pointer in save_stack_trace_tsk(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/ps3: Update ps3_defconfigGeoff Levand
Update ps3_defconfig. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/ps3: Add a sub-match id to ps3_system_busMasakazu Mokuno
Add sub match id for ps3 system bus so that two different system bus devices can be connected to a shared device. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc: Add a 6xx defconfigKumar Gala
This is a defconfig from Dave Jones and should be similar (if not identical) to the fedora ppc32 defconfig. The intent is to cover all cache coherent 6xx based chips and platforms as reasonable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/dma: Use the struct dma_attrs in iommu codeMark Nelson
Update iommu_alloc() to take the struct dma_attrs and pass them on to tce_build(). This change propagates down to the tce_build functions of all the platforms. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/cell: Add support for power button of future IBM cell bladesChristian Krafft
This patch adds support for the power button on future IBM cell blades. It actually doesn't shut down the machine. Instead it exposes an input device /dev/input/event0 to userspace which sends KEY_POWER if power button has been pressed. haldaemon actually recognizes the button, so a plattform independent acpid replacement should handle it correctly. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/cell: Cleanup sysreset_hack for IBM cell bladesChristian Krafft
This patch adds a config option for the sysreset_hack used for IBM Cell blades. The code is moves from pervasive.c into ras.c and gets it's own init method. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/cell/cpufreq: Add spu aware cpufreq governorChristian Krafft
This patch adds a cpufreq governor that takes the number of running spus into account. It's very similar to the ondemand governor, but not as complex. Instead of hacking spu load into the ondemand governor it might be easier to have cpufreq accepting multiple governors per cpu in future. Don't know if this is the right way, but it would keep the governors simple. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/axonram: Enable partitioning of the Axons DDR2 DIMMsMaxim Shchetynin
DDR2 memory DIMMs on the Axon could be accessed only as one partition when using file system drivers which are using the direct_access() method. This patch enables for such file system drivers to access Axon's DDR2 memory even if it is splitted in several partitions. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22powerpc/axonram: Use only one block device major numberMaxim Shchetynin
Axonram module registers one block device for each DDR2 DIMM found on a system. This means that each DDR2 DIMM becomes its own block device major number. This patch lets axonram module to register the only one block device for all DDR2 DIMMs which also spares kernel resources. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-20KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destructionMarcelo Tosatti
Flush the shadow mmu before removing regions to avoid stale entries. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Add coalesced MMIO support (powerpc part)Laurent Vivier
This patch enables coalesced MMIO for powerpc architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Remove decache_vcpus_on_cpu() and related callbacksAvi Kivity
Obsoleted by the vmx-specific per-cpu list. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-18Merge branch 'linus' into timers/nohzIngo Molnar
2008-07-18nohz: prevent tick stop outside of the idle loopThomas Gleixner
Jack Ren and Eric Miao tracked down the following long standing problem in the NOHZ code: scheduler switch to idle task enable interrupts Window starts here ----> interrupt happens (does not set NEED_RESCHED) irq_exit() stops the tick ----> interrupt happens (does set NEED_RESCHED) return from schedule() cpu_idle(): preempt_disable(); Window ends here The interrupts can happen at any point inside the race window. The first interrupt stops the tick, the second one causes the scheduler to rerun and switch away from idle again and we end up with the tick disabled. The fact that it needs two interrupts where the first one does not set NEED_RESCHED and the second one does made the bug obscure and extremly hard to reproduce and analyse. Kudos to Jack and Eric. Solution: Limit the NOHZ functionality to the idle loop to make sure that we can not run into such a situation ever again. cpu_idle() { preempt_disable(); while(1) { tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we are in the idle loop while (!need_resched()) halt(); tick_nohz_restart_sched_tick(); <- disables NOHZ mode preempt_enable_no_resched(); schedule(); preempt_disable(); } } In hindsight we should have done this forever, but ... /me grabs a large brown paperbag. Debugged-by: Jack Ren <jack.ren@marvell.com>, Debugged-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-16powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigsTimur Tabi
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some audio related options. In particular, OSS emulation should be enabled, and the old ALSA API should be disabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16Revert "powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENET"Kumar Gala
This reverts commit e3621ee633810be1079d0fa65ac2c904f53b73fa. This was not the proper fix. As Scott Wood said CONFIG_FS_ENET has nothing to do with the issue. The proper fix is to select PHYLIB for this board.
2008-07-16powerpc/ep8248e: Unconditionally select PHYLIB for mdio_bitbangKumar Gala
Its possible to build the phylib as a module, however this breaks the board code because alloc_mdio_bitbang and mdiobus_register are not available if we build as a module. These are needed by the board code since it implements the low level mdio bitbang ops. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in EP8248E support. Long term we should look at moving the mdio_ops into its own file so it can be built as a module. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/fsl: Minor TLBSYNC cleanup for FSL Book-EKumar Gala
Use the TLBSYNC macro defined in ppc_asm.h rather than our own ifdefs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: rework FSL Book-E PTE access and TLB missKumar Gala
This converts the FSL Book-E PTE access and TLB miss handling to match with the recent changes to 44x that introduce support for non-atomic PTE operations in pgtable-ppc32.h and removes write back to the PTE from the TLB miss handlers. In addition, the DSI interrupt code no longer tries to fixup write permission, this is left to generic code, and _PAGE_HWWRITE is gone. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Remove Kconfig PPC_CPM_NEW_BINDINGKumar Gala
With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING fixed up we dont have need for the Kconfig option anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16gianfar: Add magic packet and suspend/resume support.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Fix a bunch of sparse warnings in the qe_libAndy Fleming
Mostly having to do with not marking things __iomem. And some failure to use appropriate accessors to read MMIO regs. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Add support for multiple gfar mdio interfacesAndy Fleming
The old code assumed there was only one, but the 8572 actually has 3. Also, our usual id, 0xe0024520, gets resolved to -1 somewhere, and this was preventing the multiple buses from having different ids. So we only keep the low 20 bits, which have the interesting info, anyway. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/86xx: mpc8610_hpcd - add support for ULI RTCAnton Vorontsov
The ULI "Super South Bridge" contains ISA bridge to the legacy devices, such as Super IO mouse/keyboard/floppy disk controllers, parallel port, i8259 interrupt controller and so on. i8259 is disabled on the MPC8610HPCD, and other peripherals are not traced out. So we use only RTC. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/85xx/86xx: some refactoring for fsl_uli1575 codeAnton Vorontsov
- Get rid of uses_fsl_uli_m1575, it does not scale for all cases. Instead, let's explicitly use machine_is() for each fixup. - Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with machine_is(). One step closer to multiplatform kernels. - Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied. - RTC quirk applies to all boards though, so no machine_is() checks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/fsl_uli1575: fix RTC quirk to work on MPC8572DS and MPC8610HPCDAnton Vorontsov
This patch fixes RTC on MPC8572DS boards: dummy read helps only when reading at the end of the bridge's memory (i.e. outside of behind the bridge devices' assigned regions). With this change the quirk also makes RTC work on MPC8610HPCD, so it's unlikely that this will break MPC8641HPCN or MPC8544DS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/fsl_soc: gianfar: don't probe disabled devicesAnton Vorontsov
Freescale ships MPC8315E-RDB boards in two variants: 1. With TSEC1 ethernet support and USB UTMI PHY; 2. Without TSEC1 support, but with USB ULPI PHY in addition. For the second case U-Boot will add status = "disabled"; property into the TSEC1 node, so Linux should not try to probe it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/83xx: fix ULPI setup for MPC8315 processorsAnton Vorontsov
We must not use MPC831X_SICR[HL]_* definitions for the MPC8315 processors, because SICR USB bits locations are not compatible with MPC8313. This patch fixes ULPI workability on MPC8315E-RDB boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Move mpc83xx_add_bridge to fsl_pci.cJohn Rigby
This allows other platforms with the same pci block like MPC5121 to use it. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: pci config cleanupJohn Rigby
Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/mpc7448: add alias list to DTS, clean out old chosen nodePaul Gortmaker
The mpc7448hpc2 board doesn't have an alias block like most of the other modern eval boards have. We need this block in order to have u-boot be able to make use of the CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node) in the future. Also remove the old, redundant chosen node. Of all the modern Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only one which still has it. Its presence also breaks with some older versions of u-boot, like 1.3.1 -- which try and insert a second chosen node. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/mpc8313erdb: Add power management to the device tree.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/mpc83xx: Power Management supportScott Wood
Basic PM support for 83xx. Standby is implemented as sleep. Suspend-to-RAM is implemented as "deep sleep" (with the processor turned off) on 831x. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENETKumar Gala
If we don't enable FS_ENET we get build issues: arch/powerpc/platforms/built-in.o: In function `ep8248e_mdio_probe': arch/powerpc/platforms/82xx/ep8248e.c:129: undefined reference to `alloc_mdio_bitbang' arch/powerpc/platforms/82xx/ep8248e.c:143: undefined reference to `mdiobus_register' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16Merge commit 'origin/master'Benjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/kernel/stacktrace.c arch/powerpc/mm/slice.c arch/ppc/kernel/smp.c