aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-10-17powerpc/40x: Add PowerPC 405EZ Acadia defconfigJosh Boyer
Add simple defconfig for the AMCC PowerPC 405EZ Acadia evaluation board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add cuboot wrapper for Acadia boardJosh Boyer
This adds a cuboot wrapper for the AMCC PowerPC 405EZ Acadia board. The clocking code is derived from U-Boot, originally written by Stefan Roese. Signed-off-by: Josh Boyer <jwboyer@linux.ibm.com>
2008-10-17powerpc/40x: Add PowerPC 40x simple platform supportJosh Boyer
This adds a common board file for almost all of the "simple" PowerPC 40x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. The first board ported to this is the AMCC PowerPC 405EZ Acadia board. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add AMCC PowerPC 405EZ to cputableJosh Boyer
This adds the AMCC PowerPC 405EZ chip to the cputable Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: AMCC PowerPC 405EZ Acadia DTSJosh Boyer
Add the base DTS for the AMCC PowerPC 405EZ Acadia evalution board. In addition to some of the normal PPC 40x peripherals, the Acadia board has: - 64 MiB PSRAM - NOR and NAND flash - Two USB 1.1 host ports - Two CAN 2.0 ports - ADC and DAC connectors - LCD display This adds the basic platform support to build from. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-16Merge branch 'kvm-updates/2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits) KVM: ia64: Add intel iommu support for guests. KVM: ia64: add directed mmio range support for kvm guests KVM: ia64: Make pmt table be able to hold physical mmio entries. KVM: Move irqchip_in_kernel() from ioapic.h to irq.h KVM: Separate irq ack notification out of arch/x86/kvm/irq.c KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs KVM: Move device assignment logic to common code KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/ KVM: VMX: enable invlpg exiting if EPT is disabled KVM: x86: Silence various LAPIC-related host kernel messages KVM: Device Assignment: Map mmio pages into VT-d page table KVM: PIC: enhance IPI avoidance KVM: MMU: add "oos_shadow" parameter to disable oos KVM: MMU: speed up mmu_unsync_walk KVM: MMU: out of sync shadow core KVM: MMU: mmu_convert_notrap helper KVM: MMU: awareness of new kvm_mmu_zap_page behaviour KVM: MMU: mmu_parent_walk KVM: x86: trap invlpg KVM: MMU: sync roots on mmu reload ...
2008-10-16Merge branch 'core-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually.
2008-10-16Merge branch 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
2008-10-16powerpc: use iommu_num_pages function in IOMMU codeJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16powerpc: rename iommu_num_pages function to iommu_nr_pagesJoerg Roedel
This is a preparation patch for introducing a generic iommu_num_pages function. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16compat: generic compat get/settimeofdayChristoph Hellwig
Nothing arch specific in get/settimeofday. The details of the timeval conversion varied a little from arch to arch, but all with the same results. Also add an extern declaration for sys_tz to linux/time.h because externs in .c files are fowned upon. I'll kill the externs in various other files in a sparate patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ] Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16compat: move cp_compat_stat to common codeChristoph Hellwig
struct stat / compat_stat is the same on all architectures, so cp_compat_stat should be, too. Turns out it is, except that various architectures have slightly and some high2lowuid/high2lowgid or the direct assignment instead of the SET_UID/SET_GID that expands to the correct one anyway. This patch replaces the arch-specific cp_compat_stat implementations with a common one based on the x86-64 one. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ] Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16[PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITYMartin Schwidefsky
The SET_PERSONALITY macro is always called with a second argument of 0. Remove the ibcs argument and the various tests to set the PER_SVR4 personality. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16powerpc: fix linux-next build failureStephen Rothwell
Today's linux-next build (powerpc allyesconfig) failed like this: In file included from arch/powerpc/include/asm/mmu-hash64.h:17, from arch/powerpc/include/asm/mmu.h:8, from arch/powerpc/include/asm/pgtable.h:8, from arch/powerpc/mm/slb.c:20: arch/powerpc/include/asm/page.h:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'memstart_addr' arch/powerpc/include/asm/page.h:77: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'kernstart_addr' Caused by commit 600715dcdf567c86f8b2c6173fcfb4b873e25a19 ("generic: add phys_addr_t for holding physical addresses") from the tip-core tree. This only fails if CONFIG_RELOCATABLE is set. So include that instead of asm/types.h in asm/page.h for the CONFIG_RELOCATABLE case. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: ppc-dev <linuxppc-dev@ozlabs.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-15oprofile: more whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15powerpc/mpc5200: Don't touch pipelining for MPC5200BWolfram Sang
MPC5200 needs to have pipelining disabled for ATA to work. MPC5200B does not. So, for the latter, don't touch the original setting from the bootloader. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15powerpc/52xx: Make cuImage more robust in locating immr node.Grant Likely
Current device trees do not have the device_type = soc property set anymore. Fix up the cuImage bootwrapper fragment to still find the IMMR nodes. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15KVM: switch to get_user_pages_fastMarcelo Tosatti
Convert gfn_to_pfn to use get_user_pages_fast, which can do lockless pagetable lookups on x86. Kernel compilation on 4-way guest is 3.7% faster on VMX. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15Merge branches 'core/softlockup', 'core/softirq', 'core/resources', ↵Ingo Molnar
'core/printk' and 'core/misc' into core-v28-for-linus
2008-10-15KVM: ppc: kvmppc_44x_shadow_release() does not require mmap_sem to be lockedHollis Blanchard
And it gets in the way of get_user_pages_fast(). Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: powerpc: Map guest userspace with TID=0 mappingsHollis Blanchard
When we use TID=N userspace mappings, we must ensure that kernel mappings have been destroyed when entering userspace. Using TID=1/TID=0 for kernel/user mappings and running userspace with PID=0 means that userspace can't access the kernel mappings, but the kernel can directly access userspace. The net is that we don't need to flush the TLB on privilege switches, but we do on guest context switches (which are far more infrequent). Guest boot time performance improvement: about 30%. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: Write only modified shadow entries into the TLB on exitHollis Blanchard
Track which TLB entries need to be written, instead of overwriting everything below the high water mark. Typically only a single guest TLB entry will be modified in a single exit. Guest boot time performance improvement: about 15%. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: Stop saving host TLB stateHollis Blanchard
We're saving the host TLB state to memory on every exit, but never using it. Originally I had thought that we'd want to restore host TLB for heavyweight exits, but that could actually hurt when context switching to an unrelated host process (i.e. not qemu). Since this decreases the performance penalty of all exits, this patch improves guest boot time by about 15%. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: guest breakpoint supportHollis Blanchard
Allow host userspace to program hardware debug registers to set breakpoints inside guests. Signed-off-by: Jerone Young <jyoung5@us.ibm.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: trace powerpc instruction emulationChristian Ehrhardt
This patch adds a trace point for the instruction emulation on embedded powerpc utilizing the KVM_TRACE interface. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: adds trace points for ppc tlb activityJerone Young
This patch adds trace points to track powerpc TLB activities using the KVM_TRACE infrastructure. Signed-off-by: Jerone Young <jyoung5@us.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ppc: enable KVM_TRACE building for powerpcJerone Young
This patch enables KVM_TRACE to build for PowerPC arch. This means just adding sections to Kconfig and Makefile. Signed-off-by: Jerone Young <jyoung5@us.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15Merge commit 'origin'Benjamin Herrenschmidt
Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
2008-10-15powerpc: Fix CHRP PCI config access for indirect_pciBenjamin Herrenschmidt
Recently, indirect_pci was changed to test if the bus number requested is the one hanging straight off the PHB, then it substitutes the bus number with another one contained in a new "self_busno" field of the pci_controller structure. However, this breaks CHRP which didn't initialize this new field, and which relies on having the right bus number passed to the hardware. This fixes it by initializing this variable properly for all CHRP bridges Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPsBenjamin Herrenschmidt
The detection of the IBM "Python" PCI host bridge on IBM CHRP machines such as old RS6000 was broken when we changed of_device_is_compatible() from strncasecmp to strcasecmp (dropped the "n" variant) due to the way IBM encodes the chip version. We fix that by instead doing a match on the model property like we do for others bridges in that file. It should be good enough for those machines. If yours is still broken, let me know. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15powerpc: Fix 32-bit SMP boot on CHRPBenjamin Herrenschmidt
prom_init was changed to take a new argument, the address where the kernel is loaded, which is now used to copy the SMP spin loop down before use. However, only head_64.S was adapted to pass this new value, not head_32.S, thus breaking SMP boot on 32-bit SMP CHRP machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15powerpc: Fix link errors on 32-bit machines using legacy DMABenjamin Herrenschmidt
The new merged DMA code will try to access isa_bridge_pcidev when trying to DMA to/from legacy devices. This is however only defined on 64-bit. Fixes this for now by adding the variable, even if it stays NULL. In the long run, we'll make isa-bridge.c common to 32 and 64-bit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15powerpc/pci: Improve detection of unassigned bridge resourcesBenjamin Herrenschmidt
When the powerpc PCI layer is not configured to re-assign everything, it currently fails to detect that a PCI to PCI bridge has been left unassigned by the firmware and tries to allocate resource for the default window values in the bridge (0...X) (with the notable exception of a hack we have in there that detects some Apple firmware unassigned bridge resources). This results in resource allocation failures, which are generally fixed up later on but it causes scary warnings in the logs and we have seen the fixup code fall over in some circumstances (a different issue to fix as well). This code improves that by providing a more complete & useful function to intuit that a bridge was left unassigned by the firmware, and thus force a full re-allocation by the PCI code without trying to allocate the existing useless resources first. The algorithm we use basically considers unassigned a window that starts at 0 (PCI address) if the corresponding address space enable bit is not set. In addition, for memory space, it considers such a resource unassigned also if the host bridge isn't configured to forward cycles to address 0 (ie, the resource basically overlaps main memory). This fixes a range of problems with things like Bare-Metal support on pSeries machines, or attempt to use partial firmware PCI setup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14sputrace: use marker_synchronize_unregister()Mathieu Desnoyers
We need a marker_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14powerpc: Get USE_STRICT_MM_TYPECHECKS working againDavid Gibson
The typesafe version of the powerpc pagetable handling (with USE_STRICT_MM_TYPECHECKS defined) has bitrotted again. This patch makes a bunch of small fixes to get it back to building status. It's still not enabled by default as gcc still generates worse code with it for some reason. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14powerpc: Reflect the used arguments in machine_init() prototypeSebastian Andrzej Siewior
The "phys" argument to machine_init() isn't used and isn't likely to ever be so let's remove it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14powerpc: Fix DMA offset for non-coherent DMABenjamin Herrenschmidt
After Becky's work we can almost have different DMA offsets between on-chip devices and PCI. Almost because there's a problem with the non-coherent DMA code that basically ignores the programmed offset to use the global one for everything. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14Merge commit 'kumar/kumar-next'Benjamin Herrenschmidt
2008-10-14Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13powerpc: fix fsl_upm nand driver modular buildAnton Vorontsov
The fsl_upm nand driver fails to build because fsl_lbc_lock isn't exported, the lock is needed by the inlined fsl_upm_run_pattern() function: ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined! Dave Jones purposed to export the lock, but it is better to just uninline the fsl_upm_run_pattern(). When uninlined we also no longer need the exported fsl_lbc_regs, and both fsl_lbc_lock and fsl_lbc_regs could be marked static. While at it, also add some missing includes that we should have included explicitly. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-13powerpc/83xx: add NAND support for the MPC8360E-RDK boardsAnton Vorontsov
The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus, the first local bus' user-programmable machine is configured by the firmware to work with NAND chips. QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc: FPGA support for GE Fanuc SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds support for the registers held in the devices main FPGA, exposing extra information about the revision of the board through cpuinfo. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc: reserve two DMA channels for audio in MPC8610 HPCD device treeTimur Tabi
The Freescale Elo DMA driver binds to all DMA channels in the device tree that are compatible with "fsl,eloplus-dma-channel". This conflicts with the sound drivers for the MPC8610 HPCD. On this board, the SSI uses two DMA channels and therefore those channels are not available for general purpose use. We change the compatible properties for these channels "fsl,ssi-dma-channel". This works because the sound drivers don't actually check the compatible property when it grabs channels. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc: disable CHRP and PMAC support in various defconfigsTimur Tabi
Because CHRP and PMAC are by default enabled, several non-CHRP and non-PMAC PowerPC defconfigs will have these Kconfig options set erroneously. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boardsAnton Vorontsov
The RTC is sitting on the I2C1 bus at address 0x68. RTC interrupt signal is connected to the IPIC's EXT3 interrupt line. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc: remove support for bootmem-allocated memory for the DIU driverTimur Tabi
Early versions of the Freescale DIU framebuffer driver depended on a bootmem allocation of memory for the video buffer. The need for this feature was removed in commit 6b51d51a, so now we can remove the platform-specific code that allocated that memory. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc: remove non-dependent load fsl_booke PTE_64BITMilton Miller
b38fd42ff46a4a31dced8533e8a6e549693500b6 added false dependencys to order the load of upper and lower halfs of the pte, but only adjusted whitespace instead of deleting the old load in the iside handler, letting the hardware see the non-dependent load. This patch removes the extra load. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13powerpc/5121: Add PCI support.John Rigby
Uses mpc83xx_add_bridge in fsl_pci.c Adds second register tuple to pci node register property as done for 83xx device trees in a previous patch. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 10:39:15 +0000