aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/boot
AgeCommit message (Collapse)Author
2007-01-24[POWERPC] Remove the broken Gemini supportAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add files build to .gitignoreRutger Nijlunsing
Mostly taken from corresponding Makefile's make-clean rule. Tested by (cross)compiling for $ARCH PPC and POWERPC and checking output of git-status. Signed-off-by: Rutger Nijlunsing <git-commit@tux.tmfweb.nl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Fix hang in start_ldr if _end or _edata is unalignedOlaf Hering
Quick fix for lack of memset(__bss_start, 0, _end-__bss_start) in load_kernel(). If edata is unaligned, the loop will overwrite all memory because r3 and r4 will never be equal. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-26[POWERPC] rewrite mkprep and mkbugboot in sane CAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-22[PATCH] zlib_inflate: Upgrade library code to a recent versionRichard Purdie
Upgrade the zlib_inflate implementation in the kernel from a patched version 1.1.3/4 to a patched 1.2.3. The code in the kernel is about seven years old and I noticed that the external zlib library's inflate performance was significantly faster (~50%) than the code in the kernel on ARM (and faster again on x86_32). For comparison the newer deflate code is 20% slower on ARM and 50% slower on x86_32 but gives an approx 1% compression ratio improvement. I don't consider this to be an improvement for kernel use so have no plans to change the zlib_deflate code. Various changes have been made to the zlib code in the kernel, the most significant being the extra functions/flush option used by ppp_deflate. This update reimplements the features PPP needs to ensure it continues to work. This code has been tested on ARM under both JFFS2 (with zlib compression enabled) and ppp_deflate and on x86_32. JFFS2 sees an approx. 10% real world file read speed improvement. This patch also removes ZLIB_VERSION as it no longer has a correct value. We don't need version checks anyway as the kernel's module handling will take care of that for us. This removal is also more in keeping with the zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've added something to the zlib.h header to note its a modified version. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Joern Engel <joern@wh.fh-wedel.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-04kbuild: use relative path to -ISam Ravnborg
Using a relative path has the advantage that when the kernel source tree is moved the relevant .o files will not be rebuild just because the path to the kernel src has changed. This also got rid of a user of TOPDIR - which has been deprecated for a long time now. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-28ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppcPaul Mackerras
32-bit CHRP machines are now supported only in arch/powerpc, as are all 64-bit PowerPC processors. This means that we don't use Open Firmware on any platform in arch/ppc any more. This makes PReP support a single-platform option like every other platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM is gone from arch/ppc. CONFIG_PPC_PREP is the option that selects PReP support and is generally what has replaced CONFIG_PPC_MULTIPLATFORM within arch/ppc. _machine is all but dead now, being #defined to 0. Updated Makefiles, comments and Kconfig options generally to reflect these changes. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-25Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits) kbuild: remove obsoleted scripts/reference_* files kbuild: fix make help & make *pkg kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h Kconfig: remove the CONFIG_CC_ALIGN_* options kbuild: add -fverbose-asm to i386 Makefile kbuild: clean-up genksyms kbuild: Lindent genksyms.c kbuild: fix genksyms build error kbuild: in makefile.txt note that Makefile is preferred name for kbuild files kbuild: replace PHONY with FORCE kbuild: Fix bug in crc symbol generating of kernel and modules kbuild: change kbuild to not rely on incorrect GNU make behavior kbuild: when warning symbols exported twice now tell user this is the problem kbuild: fix make dir/file.xx when asm symlink is missing kbuild: in the section mismatch check try harder to find symbols kbuild: fix section mismatch check for unwind on IA64 kbuild: kill false positives from section mismatch warnings for powerpc kbuild: kill trailing whitespace in modpost & friends kbuild: small update of allnoconfig description kbuild: make namespace.pl CROSS_COMPILE happy ... Trivial conflict in arch/ppc/boot/Makefile manually fixed up
2006-03-06kbuild: change kbuild to not rely on incorrect GNU make behaviorPaul Smith
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-10[PATCH] powerpc: trivial: modify comments to refer to new location of filesJon Mason
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Add support for Xilinx ML403 reference designGrant C. Likely
Includes fix for Xilinx silicon errata 213 Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the ↵Grant C. Likely
platfom bus. This patch only deals with the serial port definitions as there is no support for any other xilinx IP cores in the kernel tree at the moment. Board specific configuration moved out of virtex.[ch] and into the xparameters.h wrapper. This also prepares for the transition to the flattened device tree model. When the bootloader provides a device tree generated from an xparameters.h files, the kernel will no longer need xparameters/*. The platform bus will get populated with data from the device tree, and the device drivers will be automatically connected to the devices. Only the bootloader (or ppcboot) will need xparameters directly. Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15[PATCH] ppc: Remove powermac support from ARCH=ppcPaul Mackerras
This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc32: Put cache flush routines back into .relocate_code sectionPaul Janzen
In 2.6.14, we had the following definition of _GLOBAL() in include/asm-ppc/processor.h: #define _GLOBAL(n)\ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n;\ n: In 2.6.15, as part of the great powerpc merge, we moved this definition to include/asm-powerpc/ppc_asm.h, where it appears (to 32-bit code) as: #define _GLOBAL(n) \ .text; \ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n; \ n: Mostly, this is fine. However, we also have the following, in arch/ppc/boot/common/util.S: .section ".relocate_code","xa" [...] _GLOBAL(flush_instruction_cache) [...] _GLOBAL(flush_data_cache) [...] The addition of the .text section definition in the definition of _GLOBAL overrides the .relocate_code section definition. As a result, these two functions don't end up in .relocate_code, so they don't get relocated correctly, and the boot fails. There's another suspicious-looking usage at kernel/swsusp.S:37 that someone should look into. I did not exhaustively search the source tree, though. The following is the minimal patch that fixes the immediate problem. I could easily be convinced that the _GLOBAL definition should be modified to remove the ".text;" line either instead of, or in addition to, this fix. Signed-off-by: Paul Janzen <pcj@linux.sez.to> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Fix suboptimal uImage targetKumar Gala
Sam Ravnborg pointed out that calling if_changed was redundant in the rule since a prerequisite had to have changed for us to get there. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-06[PATCH] ppc32: Re-add embed_config.c to ml300/ep405Peter Korsgaard
Commit 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (ppc32: cleanup AMCC PPC40x eval boards to support U-Boot) broke the kernel for ML300 / EP405. It still compiles as there's a weak definition of the function in misc-embedded.c, but the kernel crashes as the bd_t fixup isn't performed. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01[PATCH] ppc32: fix treeboot image entrypointEugene Surovegin
Correctly specify treeboot based image entrypoint. Currently makefile uses $(ENTRYPOINT) which isn't defined anywhere. Each board port sets entrypoint-$(CONFIG_BOARD_NAME) instead. Without this patch I cannot boot Ocotea (PPC440GX eval board) anymore. I was getting random "OS panic" errors from OpenBIOS for a while, but with current kernel I get them all the time (probably because image became bigger). Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Acked-by: Tom Rini <trini@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[PATCH] powerpc: Consolidate asm compatibility macrosDavid Gibson
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10ppc/powerpc: workarounds for old Open Firmware versionsPaul Mackerras
This adds code to work around some problems with old versions of Open Firmware, such as on the early powermacs (7500 etc.) and the "Longtrail" CHRP machine. On these machines we have to claim the physical and virtual address ranges explicitly when claiming memory and then set up a V->P mapping. The Longtrail has more problems: setprop doesn't work, and we have to set an "allow-reclaim" variable to 0 in order to get claim on physical memory ranges to fail if the memory is already claimed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-BootMatt Porter
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add Yucca (440SPe eval board) platformRoland Dreier
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-26powerpc: Fixes to get the Longtrail CHRP a bit furtherPaul Mackerras
Talk about buggy firmware... the OF on the Longtrail returns 0 from the claim client service rather than -1 when the claim fails. It also has no device_type on the /memory node and blows up if the output buffer for package-to-path is too big. This also fixes a bug with calling alloc_up with align == 0, where we did _ALIGN_UP(alloc_bottom, 0) which will end up as 0. Lastly, we now check the return value (in r3) from calling the prom, and return -1 from call_prom if we get a negative value back. That is supposed to indicate that the requested client service doesn't exist. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-23powerpc: Make coff boot wrapper load the kernel at 8MPaul Mackerras
Previously it claimed 7MB starting at the 9M point and loaded the kernel there. That meant that prom_init put the flattened device tree above 16M. On the 601 that caused the early device tree scan to fail, since only 16MB are mapped with BATs on the 601. Moving this down to 8MB allows prom_init to put the flattened device tree between 15M and 16M, so it works on the 601. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-29[PATCH] ppc32 ld.script fix for building on ppc64Al Viro
In arch/ppc/boot/ld.script we need OUTPUT_ARCH(powerpc:common) for the same reasons why we need it in vmlinux.lds.S; when we build on ppc64 box, we need to be explicit about the target. See http://linus.bkbits.net:8080/linux-2.5/cset@1.1784.8.10 for the corresponding fix in vmlinux.lds.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] ppc32: In the boot code, don't rely on BASE_BAUD directlyTom Rini
Modifies serial_init to get base baud rate from the rs_table entry instead of BAUD_BASE. This patch eliminates duplication between the SERIAL_PORT_DFNS macro and BAUD_BASE. Without the patch, if a port set the baud rate in SERIAL_PORT_DFNS, but did not update BASE_BAUD, the BASE_BAUD value would still be used. Signed-off-by: Grant Likely <grant.likely@gdcanada.com> Signed-off-by: Tom Rini <trini@kernel.crashing.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] ppc32: Correct an instruction in the boot codeFrank van Maarseveen
In the flush and invalidate bootcode on PPC4xx we were accidentally using the wrong instruction. Use cmplw, which reads from a register like we want. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: cpci690 updatesMark A. Greer
Update the cpci690 platform code: - pass mem size in from bootwrapper via bi_rec - some minor fixups Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: katana updatesMark A. Greer
Update the katana platform support code: - if booted as zImage, pass mem size in via bi_req from bootwrapper - if booted as uImage, get mem size from bd_info passed in from u-boot - add support for 82544 present on katana 752i's - set cacheline size on pci devices - some minor fixups Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: mv64x60 updates & enhancementsMark A. Greer
Updates and enhancement to the ppc32 mv64x60 code: - move code to get mem size from mem ctlr to bootwrapper - address some errata in the mv64360 pic code - some minor cleanups - export one of the bridge's regs via sysfs so user daemon can watch for extraction events Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: add support for Marvell EV64360BP boardLee Nicks
This patch adds support for Marvell EV64360BP board. So far, it supports mpsc serial console, gigabit ethernet, jffs2 root filesystem, etc. Other device support, like watchdog, RTC, will be added later. Signed-off-by: Lee Nicks <allinux@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for PCOREKumar Gala
Support for the PCORE board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for REDWOODKumar Gala
Support for the REDWOOD board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for RAINIERKumar Gala
Support for the RAINIER board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for MCPN765Kumar Gala
Support for the MCPN765 board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for K2Kumar Gala
Support for the K2 board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for BEECHKumar Gala
Support for the BEECH board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for ASHKumar Gala
Support for the ASH board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] Remove NACA fixed address constraintDavid Gibson
Comments in head.S suggest that the iSeries naca has a fixed address, because tools expect to find it there. The only tool which appears to access the naca is addRamDisk, but both the in-kernel version and the version used in RHEL and SuSE in fact locate the NACA the same way as the hypervisor does, by following the pointer in the hvReleaseData structure. Since the requirement for a fixed address seems to be obsolete, this patch removes the naca from head.S and replaces it with a normal C initializer. For good measure, it removes an old version of addRamDisk.c which was sitting, unused, in the ppc32 tree. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-01[PATCH] ppc32: add 440ep supportMatt Porter
Add PPC440EP core support. PPC440EP is a PPC440-based SoC with a classic PPC FPU and another set of peripherals. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13[PATCH] ppc32: make -j12 all fails in uImage targetOlaf Hering
make -j zImage may call if_changed twice at the same time, the result is a corrupted vmlinux.gz Write to a temporary file for the time being until someone with make skills fix the serialization properly. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] update comment about gzip scratch sizeOlaf Hering
fix a comment about the array size. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] remove <linux/xattr_acl.h>Christoph Hellwig
This file duplicates <linux/posix_acl_xattr.h>, using slightly different names. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc32: Kill embedded system.map, use kallsymsBenjamin Herrenschmidt
This patch kills the whole embedded System.map mecanism and the bootloader-passed System.map that was used to provide symbol resolution in xmon. Instead, xmon now uses kallsyms like ppc64 does. No hurry getting that in Linus tree, let it be tested in -mm for a while first and make sure it doesn't break various embedded configs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28[PATCH] ppc32: Fix uImage make target to report success correctlyKumar Gala
The existing make rule when building a uImage would check to see if the image file existed to report 'is ready' or 'not made'. However make appeared to compute the file list before the rule was executed. Signed-off-by: Chris Clark <cpclark@xmission.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-30[PATCH] kbuild/ppc: tell when uimage was not builtSam Ravnborg
Tom Rini said: Note that there is still a trivial'ish change to make. When mkimage doesn't exist on the host we should say "uImage not made" or something similar. So I did like Tom asked. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] ppc32: Fix building 32bit kernel for 64bit machinesTom Rini
When building a ppc32 MULTIPLATFORM kernel for a 64bit pmac, we try and build certain files or use certain functions that make no sense in that context. This catches the last of these. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!