aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/platforms
AgeCommit message (Collapse)Author
2006-03-27[PATCH] ppc32: Adds support for the LITE5200B dev boardSylvain Munaut
ppc32: Adds support for the LITE5200B dev board This LITE5200B devboard is the new development board for the Freescale MPC5200 processor. It has two PCI slots and so a different PCI IRQ routing. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits) [PATCH] powerpc: Add FSL SEC node to documentation [PATCH] macintosh: tidy-up driver_register() return values [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values [PATCH] powerpc: via-pmu warning fix [PATCH] macintosh: cleanup the use of i2c headers [PATCH] powerpc: dont allow old RTC to be selected [PATCH] powerpc: make powerbook_sleep_grackle static [PATCH] powerpc: Fix warning in add_memory [PATCH] powerpc: update mailing list addresses [PATCH] powerpc: Remove calculation of io hole [PATCH] powerpc: iseries: Add bootargs to /chosen [PATCH] powerpc: iseries: Add /system-id, /model and /compatible [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt) [PATCH] powerpc: iseries: mf related cleanups [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early() [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers ...
2006-03-20Merge branch 'master'Kumar Gala
2006-03-17[PATCH] Fix compile error for ML300/403Grant Likely
Needed due to changes in ppc_sys.c. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-17[PATCH] ppc: Fix platform_notify functions marked __initAdrian Cox
While adding USB support to an MV64360 based board this week, I discovered that all MV64x60 boards in the kernel have platform_notify functions marked with __init. This causes an oops if a device is added after boot. The patch below removes the __init markers. I do not have all these boards to test on, but the change seems very unlikely to break anything else. Signed-off-by: Adrian Cox <adrian@humboldt.co.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-17[PATCH] kzalloc() conversion in arch/ppcEric Sesterhenn
This converts arch/ppc to kzalloc usage. Crosscompile tested with allyesconfig. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-21ppc32: Fix BCSR_SIZE for MPC834x SYSHorst Kronstorfer
According to the 'MPC8349E MDS Processor Board User Manual Rev. 1.6' the size of the BCSR mapping is 32kb. Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-02-10[PATCH] powerpc: trivial: modify comments to refer to new location of filesJon Mason
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10Merge ../powerpc-mergePaul Mackerras
2006-02-09Merge branch 'viro'Jeff Garzik
2006-02-07[PATCH] ppc32: MPC885ADS, MPC866ADS and MPC8272ADS-specific platform stuff ↵Vitaly Bordug
for fs_enet Added proper ppc_sys identification and fs_platform_info's for MPC 885ADS, 866ADS and 8272ADS, utilizing function assignment to remove/do not use platform devices which conflict with PD-incompatible drivers. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Add support for Xilinx ML403 reference designGrant C. Likely
Includes fix for Xilinx silicon errata 213 Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Add xparameters file for Xilinx ML403 reference designGrant C. Likely
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Migrate ML300 reference design to the platform busGrant C. Likely
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the ↵Grant C. Likely
platfom bus. This patch only deals with the serial port definitions as there is no support for any other xilinx IP cores in the kernel tree at the moment. Board specific configuration moved out of virtex.[ch] and into the xparameters.h wrapper. This also prepares for the transition to the flattened device tree model. When the bootloader provides a device tree generated from an xparameters.h files, the kernel will no longer need xparameters/*. The platform bus will get populated with data from the device tree, and the device drivers will be automatically connected to the devices. Only the bootloader (or ppcboot) will need xparameters directly. Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Make Virtex-II Pro support generic for all Virtex devicesGrant C. Likely
The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX FPGAs. This patch cleans up the Virtex naming convention to reflect more than just the Virtex-II Pro. Rename files virtex-ii_pro.[ch] to virtex.[ch] Rename config value VIRTEX_II_PRO to XILINX_VIRTEX Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Move xparameters.h into xilinx virtex device specific pathGrant C. Likely
xparameters should not be needed by anything but virtex platform code. Move it from include/asm-ppc/ to platforms/4xx/xparameters/ This is preparing for work to remove xparameters from the dependancy tree for most c files. xparam changes should not cause a recompile of the world. Instead, drivers should get device info from the platform bus (populated by the boot code) Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-05[SERIAL] uart_port flags member should use UPF_*Russell King
Convert usage of ASYNC_* to UPF_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05[SERIAL] uart_port iotype member should use UPIO_*Russell King
Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-27[PATCH] mv643xx_eth: Clean up platform_data configurationDale Farnsworth
We shouldn't expose the hardware register contents in platform_data. The only things we allow the user to configure are autoneg, speed, and duplex. Add specific platform_data fields for these values and remove the registers configs. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-15[PATCH] ppc: Remove powermac support from ARCH=ppcPaul Mackerras
This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13[PATCH] powerpc: Updated platforms that use gianfar to match driverKumar Gala
The gianfar driver changed how it required MDIO bus and phy id's to be passed to it. Also, it no longer passes the physical address of the MDIO bus. Instead we have a proper platform device. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] m68k: kill mach_floppy_setup, convert to proper __setup() in driversAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: namespace pollution fix (custom->amiga_custom)Al Viro
in amigahw.h custom renamed to amiga_custom, in drivers with few instances the same replacement, in the rest - #define custom amiga_custom in driver itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] PCI: pci_find_device remove (ppc/platforms/85xx/mpc85xx_cds_common.c)Jiri Slaby
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board supportKumar Gala
This patch adds support for the TQ Components TQM85xx modules. Currently the modules TQM8540/8541/8555/8560 are supported. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc: removed unused variable i from code.Otavio Salvador
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] PPC_PREP: remove unneeded exportsAdrian Bunk
This patch removes the EXPORT_SYMBOL'ed but completely unused variable ucSystemType and removes the unneeded EXPORT_SYMBOL(_prep_type). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-06[PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCISylvain Munaut
Some custom cards might not need PCI, without this patch, compilation fails. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Remove useless file arch/ppc/platforms/mpc5200.cSylvain Munaut
That file is a left-over of the 'old' OCP model that should have been erased during the change to platform model but I forgot it ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: remove "jumbo" member from ocp_func_emac_dataEugene Surovegin
Remove the not needed anymore "jumbo" member from ocp_func_emac_data. Jumbo frame support is handled by PPC4xx EMAC driver internally now. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] powerpc: CPM2 interrupt handler failure after 100,000 interruptsEdson Seabra
The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: Edson Seabra <Edson.Seabra@cyclades.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12[PATCH] powerpc: Fix clock spreading setting on some powermacsBenjamin Herrenschmidt
The code that sets the clock spreading feature of the Intrepid ASIC must not be run on some machine models or those won't boot. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-17[PATCH] ppc: Fix warnings related to seq_fileKumar Gala
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] ppc32: Add support for handling PCI interrupts on MPC834x PCI ↵Kumar Gala
expansion card The MPC8349 PIBs system has a expansion board with 6 PCI slots. We needed to update the IDSEL interrupt mapping for it to work properly. However, only PCI1 is supported as the first revision of this expansion board doesn't function properly for PCI2. For the time being we have zero'd out the entries for the IDSELs related to PCI2. When a functioning expansion board exists we can fix the table. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] ppc: add support for new powerbooksOlof Johansson
Enablement patch for the new PowerBooks (late 2005 edition). This enables the ATA controller, Gigabit ethernet and basic AGP setup. Bluetooth works out-of-the box after running hid2hci. Still remaining is to get the touchpad to work, the simple change of just adding the new USB ids isn't enough. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] Update email address for KumarKumar Gala
Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[PATCH] powerpc: Merge cacheflush.h and cache.hDavid Gibson
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-09[PATCH] ppc32: Update MPC834x platform to work with new phylibKumar Gala
MPC834x uses the gianfar network driver which now uses the new phylib. We need to update the platform code to create a gianfar platform MDIO bus and pass the right intializations to the gianfar driver to make things work again. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] ppc32: Fix STx GP3 buildMatt Porter
Add missing include file to fix STx GP3 build. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09powerpc: merge irq.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-07[PATCH] RapidIO support: ppc32Matt Porter
Adds PPC32 RIO support. Init code for the MPC85xx RIO ports and glue for the STx GP3 board to use it. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-BootMatt Porter
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add Yucca (440SPe eval board) platformRoland Dreier
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add 440SPe supportRoland Dreier
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: add watchdog & RTC support for Marvell EV64360BP boardLee Nicks
This patch adds watchdog, RTC support for Marvell EV64360BP board. Signed-off-by: Lee Nicks <allinux@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
2005-10-30[PATCH] remove some more check_region stuffJeff Garzik
Removed some more references to check_region(). I checked these changes into the 'checkreg' branch of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git The only valid references remaining are in: drivers/scsi/advansys.c drivers/scsi/BusLogic.c drivers/cdrom/sbpcd.c sound/oss/pss.c Remove last vestiges of ide_check_region() drivers/char/specialix: trim trailing whitespace drivers/char/specialix: eliminate use of check_region() Remove outdated and unused references to check_region() [sound oss] remove check_region() usage from cs4232, wavfront [netdrvr eepro] trim trailing whitespace [netdrvr eepro] remove check_region() usage Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 16:20:32 +0000