aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc64/kernel/Makefile
AgeCommit message (Collapse)Author
2005-11-11[PATCH] powerpc: Move udbg code to arch/powerpcDavid Gibson
Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpcDavid Gibson
This patch moves a bunch more files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: hvcall.h proc_ppc64.c sysfs.c lparcfg.c rtas_pci.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Move scanlog.c to platforms/pseriesDavid Gibson
scanlog.c is only compiled on pSeries. Thus, this patch moves it to platforms/pseries. Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64). Built for iSeries (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-10[PATCH] ppc64: move eeh.c to powerpc directory from ppc64Linas Vepstas
11-eeh-move-to-powerpc.patch Move arch/ppc64/kernel/eeh.c to arch//powerpc/platforms/pseries/eeh.c No other changes (except for Makefile to build it) Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpcDavid Gibson
This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09powerpc: merge irq.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-05powerpc: Merge smp.c and smp.hPaul Mackerras
This also moves setup_cpu_maps to setup-common.c (calling it smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04powerpc: Merge smp-tbsync.c (the generic timebase sync routine)Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03powerpc: move ppc64/kernel/signal.c to arch/powerpcStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: Merge remaining RTAS codePaul Mackerras
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since cell wants them as well as pseries (and chrp can use rtas-proc.c too, at least in principle). rtas_fw.c is gone, with its bits moved into rtas_flash.c and rtas.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge bitops.hDavid Gibson
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: move arch/ppc64/kernel/bpa* to arch/powerpc/platforms/cellArnd Bergmann
This patch simply moves files over to arch/powerpc without making any changes to them. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: move mmio_nvram.c over to arch/powerpcArnd Bergmann
The nvram code formally known as bpa_nvram.c is rather generic really, so it is quite likely to be useful to future boards not based on cell. This patch puts it into arch/powerpc/sysdev. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Rename BPA to CellArnd Bergmann
The official name for BPA is now CBEA (Cell Broadband Engine Architecture). This patch renames all occurences of the term BPA to 'Cell' for easier recognition. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29powerpc: Merge maple support code to arch/powerpc/platforms/maplePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28[PATCH] powerpc: Move xics.[ch] into platforms/pseriesDavid Gibson
This patch moves the XICS interrupt controller code into the platforms/pseries directory, since it only appears on pSeries machines. If it ever appears on some other machine we can move it to sysdev, although xics.c itself will need a bunch of changes in that case to remove pSeries specific assumptions. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28ppc64: use the merged syscall tableStephen Rothwell
This allows us to also use entry_64.S from the merged tree and reverts the setup_64.c part of fda262b8978d0089758ef9444508434c74113a61. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28powerpc: Move U3 IOMMU driver to arch/powerpc/sysdevPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] ppc64: remove arch/ppc64/kernel/setup.cPaul Mackerras
and use setup_64.c from the merged tree instead. The only difference between them was the code to set up the syscall maps. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge rtas.c into arch/powerpc/kernelPaul Mackerras
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c, which contains generic RTAS functions useful on any CHRP platform, and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain some pSeries-specific firmware flashing bits. The parts of rtas.c that are to do with pSeries-specific error logging are protected by a new CONFIG_RTAS_ERROR_LOGGING symbol. The inclusion of rtas.o is controlled by the CONFIG_PPC_RTAS symbol, and the relevant platforms select that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge i8259.c into arch/powerpc/sysdevPaul Mackerras
This changes the parameters for i8259_init so that it takes two parameters: a physical address for generating an interrupt acknowledge cycle, and an interrupt number offset. i8259_init now sets the irq_desc[] for its interrupts; all the callers were doing this, and that code is gone now. This also defines a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and makes the platforms that need it select that symbol. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Move ras.c into arch/powerpc/platforms/pseriesMichael Ellerman
ras.o is only built for CONFIG_PPC_PSERIES, so move it into arch/powerpc/platforms/pseries. Update Makefiles to suit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-24powerpc: Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.cStephen Rothwell
Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update the Makefiles to make it work, and make ARCH=ppc64 still work. Michael's version put vio.c in arch/powerpc/sysedv but after consolting Paulus, this one puts it in arch/powerpc/kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-22ppc64: Use arch/powerpc/platforms/powermac for powermac build.Paul Mackerras
This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Use the merged mpic.cPaul Mackerras
This means we now compile in arch/powerpc/sysdev for ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]David Gibson
This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge time.c and asm/time.h.Paul Mackerras
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpcPaul Mackerras
Also corrected my email address in ptrace.c and updated the comments at the top of ptrace32.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18powerpc: merge ppc signal.c and ppc64 signal32.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17powerpc: Merge syscalls.c and sys_ppc32.c.Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-13powerpc: merge ptrace.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: use powerpc of_device.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: fix arch/ppc64/kernel/MakefileStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: merge binfmt_elf32.cStephen Rothwell
and use start_thread for both 32 and 64 bit bineries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13powerpc: consolidate cputable.cStephen Rothwell
Also simplify arch/ppc64/kernel/Makefile Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-11ppc64: Use merged versions of init_task.c and process.c.Paul Mackerras
These two files are now built in arch/powerpc/kernel instead of arch/ppc64/kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Get 64-bit configs to compile with ARCH=powerpcPaul Mackerras
This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move lparmap.c to arch/powerpc/kernelPaul Mackerras
Since lparmap.s gets included in arch/powerpc/kernel/head_64.S, this avoids depending on a file in another directory. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move pSeries files to arch/powerpc/platforms/pseriesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10ppc64: Use the merged lmb routinesPaul Mackerras
The only real change here is that lmb_enforce_memory_limit now takes the memory_limit as a parameter instead of as a global variable. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-01powerpc: make iSeries buildStephen Rothwell
Merge vmlinux.lds.S. Also remove arch/powerpc/kernel/vmlinux.lds which is a generated file. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01ppc64: simplify the build a littleStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01powerpc: merge idle_power4.S and trapc.sStephen Rothwell
Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30powerpc: Move lparmap.c to powerpc/platformsStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30powerpc: remove old vector.S filesStephen Rothwell
Update old kernel/Makefiles to cope Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move viopath.c to powerpc/platforms/iseriesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_smp.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to smp.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_vio.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to vio.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_VpdInfo.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to vpdinfo.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 03:36:52 +0000