aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc
AgeCommit message (Collapse)Author
2005-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-12-20[PATCH] powerpc: CPM2 interrupt handler failure after 100,000 interruptsEdson Seabra
The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: Edson Seabra <Edson.Seabra@cyclades.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-16[PATCH] ppc: ppc4xx_dma DMA_MODE_{READ,WRITE} fixAl Viro
DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their declarations there match the definitions. Old declarations in ppc4xx_dma.h are not right anymore (wrong type, to start with). Killed them, added include of asm/dma.h where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] ppc32: set smp_tb_synchronized on UP with SMP kernelJohannes Berg
ppc32 kernel, when built with CONFIG_SMP and booted on a single CPU machine, will not properly set smp_tb_synchronized, thus causing gettimeofday() to not use the HW timebase and to be limited to jiffy resolution. This, among others, causes unacceptable pauses when launching X.org. Signed-Off-By: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12[PATCH] powerpc: Fix clock spreading setting on some powermacsBenjamin Herrenschmidt
The code that sets the clock spreading feature of the Intrepid ASIC must not be run on some machine models or those won't boot. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-05ppc: Build in all three of powermac, PREP and CHRP supportPaul Mackerras
This reverts commit da0825fd201a03294dbf7f8f030676d608da122c, making it so that if you select CONFIG_PPC_MULTIPLATFORM you get support for PMAC, PREP and CHRP built in. The reason for not allowing PMAC, PREP and CHRP to be selected individually for ARCH=ppc is that there is too much interdependency between them in the platform support code. For example, CHRP uses the PMAC nvram code. Configuring with ARCH=powerpc does allow you to select support for PMAC and CHRP separately. Support for PREP is not there yet but should be there soon. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-01[PATCH] ppc32: fix treeboot image entrypointEugene Surovegin
Correctly specify treeboot based image entrypoint. Currently makefile uses $(ENTRYPOINT) which isn't defined anywhere. Each board port sets entrypoint-$(CONFIG_BOARD_NAME) instead. Without this patch I cannot boot Ocotea (PPC440GX eval board) anymore. I was getting random "OS panic" errors from OpenBIOS for a while, but with current kernel I get them all the time (probably because image became bigger). Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Acked-by: Tom Rini <trini@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01[PATCH] ppc32: Fix incorrect PCI frequency valueVitaly Bordug
The time to wait after deasserting PCI_RST has been counted with incorrect value - this patch fixes the issue. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-29[PATCH] ppc: fix floating point register corruptionPaolo Galtieri
I recently discovered a bug on PPC which causes the floating point registers to get corrupted when CONFIG_PREEMPT=y. The problem occurred while running a multi threaded Java application that does floating point. The problem could be reproduced in anywhere from 2 to 6 hours. With the patch I have included below it ran for over a week without failure. Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Tom Rini <trini@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-29[PATCH] ppc: Export symbol needed by MOLOtavio Salvador
Export symbol needed to allow MOL to run. This was changed to be inline in past and forgot to be change here. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-18powerpc: Fix a couple of compile warnings for 32-bit compilesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-18[PATCH] powerpc: merge align.cBenjamin Herrenschmidt
This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-18[PATCH] ppc: Fix warnings related to seq_fileKumar Gala
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-18[PATCH] ppc: Fix MPC83xx device tableKumar Gala
The SVRs for MPC8343/E were incorrect and really the SVRs for MPC8347/E. Signed-off-by: David Updegraff <dave@cray.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16[PATCH] ppc: Fix build with CONFIG_CHRP not setBenjamin Herrenschmidt
Building ARCH=ppc for multiplatforms with CONFIG_CHRP not set fails due to some unshielded code in xmon Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16[PATCH] ppc: Fix boot with yaboot with ARCH=ppcBenjamin Herrenschmidt
The merge of machine types broke boot with yaboot & ARCH=ppc due to the old code still retreiving the old-syle machine type passed in by yaboot. This patch fixes it by translating those old numbers. Since that whole mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the new prom_init that the merged architecture now uses for both ppc32 and ppc64 (after 2.6.15) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16[PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbieMarcelo Tosatti
Currently 8xx fails to boot due to endless pagefaults. Seems the bug is exposed by the change which avoids flushing the TLB when not necessary (in case the pte has not changed), introduced recently: __handle_mm_fault(): entry = pte_mkyoung(entry); if (!pte_same(old_entry, entry)) { ptep_set_access_flags(vma, address, pte, entry, write_access); update_mmu_cache(vma, address, entry); lazy_mmu_prot_update(entry); } else { /* * This is needed only for protection faults but the arch code * is not yet telling us if this is a protection fault or not. * This still avoids useless tlb flushes for .text page faults * with threads. */ if (write_access) flush_tlb_page(vma, address); } The "update_mmu_cache()" call was unconditional before, which caused the TLB to be flushed by: if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { if (vma->vm_mm == current->active_mm) { #ifdef CONFIG_8xx /* On 8xx, cache control instructions (particularly * "dcbst" from flush_dcache_icache) fault as write * operation if there is an unpopulated TLB entry * for the address in question. To workaround that, * we invalidate the TLB here, thus avoiding dcbst * misbehaviour. */ _tlbie(address); #endif __flush_dcache_icache((void *) address); } else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } Which worked to due to pure luck: PG_arch_1 was always unset before, but now it isnt. The root of the problem are the changes against the 8xx TLB handlers introduced during v2.6. What happens is the TLBMiss handlers load the zeroed pte into the TLB, causing the TLBError handler to be invoked (thats two TLB faults per pagefault), which then jumps to the generic MM code to setup the pte. The bug is that the zeroed TLB is not invalidated (the same reason for the "dcbst" misbehaviour), resulting in infinite TLBError faults. The "two exception" approach requires a TLB flush (to nuke the zeroed TLB) at each PTE update for correct behaviour: Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-13[PATCH] ppc32: Add support for handling PCI interrupts on MPC834x PCI ↵Kumar Gala
expansion card The MPC8349 PIBs system has a expansion board with 6 PCI slots. We needed to update the IDSEL interrupt mapping for it to work properly. However, only PCI1 is supported as the first revision of this expansion board doesn't function properly for PCI2. For the time being we have zero'd out the entries for the IDSELs related to PCI2. When a functioning expansion board exists we can fix the table. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] ppc: add support for new powerbooksOlof Johansson
Enablement patch for the new PowerBooks (late 2005 edition). This enables the ATA controller, Gigabit ethernet and basic AGP setup. Bluetooth works out-of-the box after running hid2hci. Still remaining is to get the touchpad to work, the simple change of just adding the new USB ids isn't enough. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] Update email address for KumarKumar Gala
Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11powerpc: Fix some compile problems with the VDSO stuffPaul Mackerras
We needed the VDSO symbols in the arch/ppc asm-offsets.c, and there were a few usages of _systemcfg still left lying around. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11[PATCH] ppc32: fix PQ2 PCI DMA interrupt handlingKumar Gala
The bit position in the status register corresponding to the PCI DMA interrupt was incorrect. Additionally, we did not have a define for the PCI DMA interrupt. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] PCI: NCR 53c810 quirkIvan Kokshaysky
Move the PPC fixup for old NCR 810 controllers to generic quirks - it's needed for Alpha, x86 and other architectures that use setup-bus.c. Thanks to Jay Estabrook for pointing out the issue. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-10[PATCH] powerpc: merge code values for identifying platformsPaul Mackerras
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Consolidate asm compatibility macrosDavid Gibson
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Merge cacheflush.h and cache.hDavid Gibson
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-10ppc/powerpc: workarounds for old Open Firmware versionsPaul Mackerras
This adds code to work around some problems with old versions of Open Firmware, such as on the early powermacs (7500 etc.) and the "Longtrail" CHRP machine. On these machines we have to claim the physical and virtual address ranges explicitly when claiming memory and then set up a V->P mapping. The Longtrail has more problems: setprop doesn't work, and we have to set an "allow-reclaim" variable to 0 in order to get claim on physical memory ranges to fail if the memory is already claimed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] ppc32: fix ppc44x fpu buildMatt Porter
Fixes ppc44x fpu support that broke from a bad arch/powerpc merge. Instead of adding KernelFP back in (which duplicates code) we use the same kernel fpu unavailable handler as classic PPC processors. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Merge signal.hDavid Gibson
Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09[PATCH] powerpc: sched fixupsAndrew Morton
- Re-add a hunk lost during merge: ppc64 is missing the hunk that disables preempt on the secondary CPUs before they call cpu_idle(). - ppc's cpu_idle() had the need_resched() test wrong. Cc: Nick Piggin <nickpiggin@yahoo.com.au> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: resched and cpu_idle reworkNick Piggin
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: disable preempt in idle tasksNick Piggin
Run idle threads with preempt disabled. Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()). How did it ever work before? Might fix the CPU hotplugging hang which Nigel Cunningham noted. We think the bug hits if the idle thread is preempted after checking need_resched() and before going to sleep, then the CPU offlined. After calling stop_machine_run, the CPU eventually returns from preemption and into the idle thread and goes to sleep. The CPU will continue executing previous idle and have no chance to call play_dead. By disabling preemption until we are ready to explicitly schedule, this bug is fixed and the idle threads generally become more robust. From: alexs <ashepard@u.washington.edu> PPC build fix From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> MIPS build fix Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] ppc32: Update MPC834x platform to work with new phylibKumar Gala
MPC834x uses the gianfar network driver which now uses the new phylib. We need to update the platform code to create a gianfar platform MDIO bus and pass the right intializations to the gianfar driver to make things work again. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] ppc32: Fix STx GP3 buildMatt Porter
Add missing include file to fix STx GP3 build. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] ppc32: Fix RapidIO build on 85xxMatt Porter
Fixes mismerged Makefile that prevented the ppc85xx rapidio support from being built. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09powerpc: merge irq.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-08[PATCH] ppc: Fix ARCH=ppc build with xmonBenjamin Herrenschmidt
xmon() prototype is inconsistent between ARCH=ppc and ARCH=powerpc, thus causing ARCH=ppc build breakage. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: SMU partition recoveryBenjamin Herrenschmidt
This patch adds the ability to the SMU driver to recover missing calibration partitions from the SMU chip itself. It also adds some dynamic mecanism to /proc/device-tree so that new properties are visible to userland. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08Merge ../linux-2.6Paul Mackerras
2005-11-07[PATCH] kfree cleanup: archJesper Juhl
This is the arch/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in arch/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded HZ division to avoid rounding errors. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] rapidio: message interface updatesMatt Porter
Updates the RIO messaging interface to pass a device instance into the event registeration and callbacks. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] RapidIO support: ppc32Matt Porter
Adds PPC32 RIO support. Init code for the MPC85xx RIO ports and glue for the STx GP3 board to use it. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add CPM1 config optionPantelis Antoniou
Kconfig patch needed by fs_enet to work. Works like CONFIG_CPM2. Cc: Kumar <kumar.gala@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add missing initrd header on ppc440Matt Porter
This missing initrd header slipped though last time. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Remove internal PCI arbiter check on PPC40xMatt Porter
On PPC405GP/GPR it should be possible to enable PCI support, even when the internal PCI arbiter is disabled (e.g. when using an external PCI arbiter). The removed code didn't allow this, and also generated a warning on PPC405EP platforms. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>