aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/Kconfig
AgeCommit message (Collapse)Author
2007-06-20Merge branch 'x3'Paul Mundt
2007-06-20sh: Preliminary support for the SH-X3 CPU.Paul Mundt
This adds basic support for UP SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Fix up cf-enabler dependency for SE boards.Paul Mundt
This was using CONFIG_SH_SOLUTION_ENGINE, where we really wanted CONFIG_SOLUTION_ENGINE. While we're at it, move the whole CF enabler mess somewhere better suited. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11sh: Tidy up dependencies for SH-2 build.Paul Mundt
SH-2 can presently get in to some pretty bogus states, so we tidy up the dependencies a bit and get it all building again. This gets us a bit closer to a functional allyesconfig and allmodconfig, though there are still a few things to fix up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fix SH-4 CPU selects.Paul Mundt
Now that select no longer works for selecting the "closest" CPU, we have to explicitly reference the precise sub-type in the few places where it actually matters (presently only setup code and some legacy sh-sci cruft). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Rip out special unknown machvec.Paul Mundt
This kills off the BareCPU board as a "special" machvec, rather, we leave this as a default for when no other vector is available, or when we want to use it in combination with other vectors for testing with generic ops. As sh_mv is copied out anyways (or overloaded when an alternate vector is explicitly selected), this doesn't consume any additional memory. The generic machvec can be forcibly selected with sh_mv=generic, or by not having any other boards enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Rework CPU/board dependencies.Paul Mundt
This was a big mess, rework the logic a bit so that we constrain to a particular subtype and figure out the board support based on that. This makes building subtype specific kernels supporting multiple boards possible again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: clockevent/clocksource/hrtimers/nohz TMU support.Paul Mundt
This adds basic support for clockevents and clocksources, presently only implemented for TMU-based systems (which are the majority of SH-3 and SH-4 systems). The old NO_IDLE_HZ implementation is also dropped completely, the only users of this were on TMU-based systems anyways. More work needs to be done to generalize the TMU handling, in that the current implementation is rather tied to the notion of TMU0 and TMU1 utilization. Additionally, as more SH timers switch over to this scheme, we'll be able to gut most of the remaining system timer infrastructure that existed before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine 7722 board support.Ryusuke Sakato
This adds more full-featured support for the SH7722 Solution Engine. Previously this was using the generic board, and lacked most of the peripheral support. Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: kdump support.Paul Mundt
This adds support for kexec based crash dumps. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7780 Solution Engine board support.Nobuhiro Iwamatsu
This adds support for the SH7780-based Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: L-BOX RE2 support.Nobuhiro Iwamatsu
This adds support for the L-BOX RE2 router. http://www.nttcom.co.jp/l-box/ L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial, and LAN x2. This is one of the very few SH boards that a general person can obtain now. The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch adding it to current git. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: generic BUG() support.Paul Mundt
Wire up GENERIC_BUG for SH. This moves off of the special bug frame and on to the generic struct bug_entry. Roughly the same semantics are retained, and we can kill off some of the verbose BUG() reporting code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: speculative execution support for SH7780.Paul Mundt
SH7780 has a speculative execution mode where it can speculatively perform an instruction fetch for subroutine returns, this allows it to be enabled. There are some various pitfalls associated with this mode, so it's left as depending on CONFIG_EXPERIMENTAL and not enabled by default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14sh: Kill off dead bigsur and ec3104 boards.Paul Mundt
Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: heartbeat consolidation for banked LEDs.Paul Mundt
This consolidates the various board heartbeat LED implementations, used for strobing the load average across a LED bank. Those boards not implementing a full bank can hook in via the LED class. We leave the compat hook in the machvec for now until those non-banked boards are able to migrate to the drivers/leds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: add SH_CLK_MD Kconfig default.Andrew Morton
This option needs a default - otherwise `make allmodconfig' gets stuck in an infinite loop. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: More tidying for large base pages.Paul Mundt
There were a few more things that needed fixing up, namely THREAD_SIZE and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE assumptions were being made. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-09[APM] SH: Convert to use shared APM emulation.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-12sh: Trivial build fixes for SH-2 support.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-08[PATCH] LOG2: Implement a general integer log2 facility in the kernelDavid Howells
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06sh: sh775x/titan fixes for irq header changes.Jamie Lenehan
The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: stacktrace/lockdep/irqflags tracing support.Paul Mundt
Wire up all of the essentials for lockdep.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dyntick infrastructure.Paul Mundt
This adds basic NO_IDLE_HZ support to the SH timer API so timers are able to wire it up. Taken from the ARM version, as it fit in to our API with very few changes needed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: TLB miss fast-path optimizations.Stuart Menefy
Handle simple TLB miss faults which can be resolved completely from the page table in assembler. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: generic push-switch framework.Paul Mundt
This adds support for a generic push switch framework. Adaptable for various switches, including GPIO switches and the push switches commonly found on Renesas debug boards. This allows switch states to be trivially reported through sysfs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Explicit endian selection support.Paul Mundt
Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Configurable timer IRQ.Paul Mundt
All of the various CPU subtypes currently hardcode TIMER_IRQ, switch this to a config option in the few places we need this. This allows further removal of hardcoded IRQ headers.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for SH7206 and SH7619 CPU subtypes.Yoshinori Sato
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-30Fix misc Kconfig typosMatt LaPlante
Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-06sh: First step at generic timeofday support.Paul Mundt
At the moment we wrap GENERIC_TIME around our existing timer API. As boards start providing their own clocksources, they're able to select GENERIC_TIME accordingly and optimize out most of the timer API. Once the current timers have been reworked as proper clocksource drivers, the rest of the place holders for the timer API can go away and we can flip on GENERIC_TIME unconditionally. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03sh: Set pclk default for SH7705.Paul Mundt
CPU sub-types set the pclk default in Kconfig, add one for SH7705. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: select CONFIG_EMBEDDED.Paul Mundt
This solution isn't very optimal, but it's generaly the behaviour that we want.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Solution Engine SH7343 board support.Paul Mundt
This adds support for the SE7343 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SH7710VoIPGW board support.Paul Mundt
This adds support for the SH7710 VoIP Gateway board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: maskreg IRQ support.Paul Mundt
Formerly implemented by ADX, we can use this generically, so move it over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Kill off dead boards.Paul Mundt
None of these have been maintained in years, and no one seems to be interested in doing so, so just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Kill off the rest of the legacy rtc mess.Paul Mundt
With the new RTC class driver, we can get rid of most of the old left over cruft. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SHMIN board support.Takashi YOSHII
This adds support for the SHMIN SH7706 board. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Add support for SH7706/SH7710/SH7343 CPUs.Paul Mundt
This adds support for the aforementioned CPU subtypes, and cleans up some build issues encountered as a result. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Make PAGE_OFFSET configurable.Paul Mundt
nommu needs to be able to shift PAGE_OFFSET, so we switch it to a non-user-visible CONFIG_PAGE_OFFSET and use that in the few places where it matters. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: math-emu supportTakashi YOSHII
This implements initial math-emu support, aimed primarily at SH-3. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: APM/PM support.Andriy Skulysh
This adds some simple PM stubs and the basic APM interfaces, primarily for use by hp6xx, where the existing userland expects it. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Add support for R7780RP and R7780MP boards.Paul Mundt
This adds support for the Renesas SH7780 development boards, R7780RP and R7780MP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: RTS7751R2D board updates.Paul Mundt
More of the same, trivial cleanups, and moving options to their own board-specific Kconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: HS7751RVoIP board updates.Paul Mundt
Various cleanups for HS7751RVoIP. Mostly just getting rid of the old mach.c and splitting codec configuration in to its own Kconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-06-29[PATCH] KConfig: Spellchecking 'similarity' and 'independent'Matt LaPlante
Several KConfig files had 'similarity' and 'independent' spelled incorrectly... Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] Configurable NODES_SHIFTYasunori Goto
Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for each arch. Its definition is sometimes configurable. Indeed, ia64 defines 5 NODES_SHIFT values in the current git tree. But it looks a bit messy. SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has been changeable by config. Suitable node's number may be changed in the future even if it is other architecture. So, I wrote configurable node's number. This patch set defines just default value for each arch which needs multi nodes except ia64. But, it is easy to change to configurable if necessary. On ia64 the number of nodes can be already configured in generic ia64 and SN2 config. But, NODES_SHIFT is defined for DIG64 and HP'S machine too. So, I changed it so that all platforms can be configured via CONFIG_NODES_SHIFT. It would be simpler. See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2 Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] bitops: sh: use generic bitopsAkinobu Mita
- remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove find_{next,first}{,_zero}_bit() - remove generic_ffs() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>