aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/Makefile
AgeCommit message (Collapse)Author
2007-10-15kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-21sh: Magic Panel R2 board support.Markus Brunner
This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501Magnus Damm
This patch replaces all instances of CONFIG_VOYAGERGX with CONFIG_MFD_SM501. While at it we make sure the r2d code compiles both with and without SM501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Initial support for SH-X3 prototype board.Paul Mundt
This adds initial support for the SH-X3 prototype board. Only simple logic for the IRQ controller and the heartbeat driver for now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-21sh: Fix DSP opcode regression for SH3-DSP parts.Paul Mundt
Older versions of binutils do not support -Wa,-isa= tuning, which is something we rely on for enabling DSP opcode support on the newer parts. SH3-DSP parts can still be handled with -Wa,-dsp even if the newer parts require the newer versions of binutils for supporting the new opcodes. This was broken in -rc1 when the SH4AL-DSP support was being reworked, and is needed to get SH3-DSP working with older toolchains again. Reported-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: hd64461 tidying.Kristoffer Ericson
Kill off the hd64461 io.c, as all of the hd64461 users are now using the generic I/O routines. [ hd64461/ moved to hd64461.c by Paul ] Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12sh: Don't let SH-4A clobber SH-4 CFLAGS.Paul Mundt
Older compilers don't support the -m4a{,nofpu} flags, which has the side-effect of allowing FP operations to be emitted. Switch this to incremental tuning, so we at least have -m4-nofpu as a fallback for the gcc3 toolchains. Without this, certain modules emit references to __udivsi3_i4 and __sdivsi3_i4. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-07sh: Drop -Wa,-dsp for DSP tuning.Paul Mundt
We already hand off the proper ISA variant with the dsp specifier appended, so we don't need to explicitly set -dsp. This causes some confusion with certain toolchains that are restricted to -dsp family opcodes artificially. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-06sh: Add cpu and mach links to CLEAN_FILES.Paul Mundt
These weren't being cleaned up, so add them to the CLEAN_FILES. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off dead SH7604 support.Paul Mundt
This was added during 2.5.x, but was never moved along. This can easily be resurrected if someone has one they wish to work with, but it's not worth keeping around in its current form. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Wrap CPU tuning through cc-option.Paul Mundt
Some compilers don't support the explicit CPU tuning, while binutils is still able to handle the special subtype-specific opcodes. Make the CFLAG optional, falling back on the compiler default if nothing better exists. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Rip out special unknown machvec.Paul Mundt
This kills off the BareCPU board as a "special" machvec, rather, we leave this as a default for when no other vector is available, or when we want to use it in combination with other vectors for testing with generic ops. As sh_mv is copied out anyways (or overloaded when an alternate vector is explicitly selected), this doesn't consume any additional memory. The generic machvec can be forcibly selected with sh_mv=generic, or by not having any other boards enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Get multiple boards in one image working again.Paul Mundt
This tidies up the build rules and permits multiple boards to be linked in to the same kernel. The earlier Kconfig work ensures that the CPU configuration is consistent across the boards, as this is the only thing that we can't do dynamically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: support older gcc'sAndrew Morton
Make my version of gcc happy. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine 7722 board support.Ryusuke Sakato
This adds more full-featured support for the SH7722 Solution Engine. Previously this was using the generic board, and lacked most of the peripheral support. Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7780 Solution Engine board support.Nobuhiro Iwamatsu
This adds support for the SH7780-based Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: L-BOX RE2 support.Nobuhiro Iwamatsu
This adds support for the L-BOX RE2 router. http://www.nttcom.co.jp/l-box/ L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial, and LAN x2. This is one of the very few SH boards that a general person can obtain now. The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch adding it to current git. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Bring kgdb back from the dead.Paul Mundt
This code has suffered quite a bit of bitrot, do some basic tidying to get it to a reasonably functional state again. This gets the basic support and the console working again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14sh: Kill off dead bigsur and ec3104 boards.Paul Mundt
Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Use proper SH-2A CFLAGS on newer compilers.Paul Mundt
-m2 doesn't end up working particularly well when we've got a constrained toolchain target. Switch to the same semantics used by SH-4A to attempt to get it right. Spotted by Alex Song <songqf9@yahoo.ca>. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Add uImage and S-rec generation support.Paul Mundt
Add a couple of new targets, both for uImage and S-rec generation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: set KBUILD_IMAGE to something sensible.Paul Mundt
This was missing for sh too, wire it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: gcc4 support.Stuart Menefy
This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Explicit endian selection support.Paul Mundt
Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for SH7206 and SH7619 CPU subtypes.Yoshinori Sato
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Solution Engine SH7343 board support.Paul Mundt
This adds support for the SE7343 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SH7710VoIPGW board support.Paul Mundt
This adds support for the SH7710 VoIP Gateway board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Kill off dead boards.Paul Mundt
None of these have been maintained in years, and no one seems to be interested in doing so, so just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SHMIN board support.Takashi YOSHII
This adds support for the SHMIN SH7706 board. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Add support for SH7706/SH7710/SH7343 CPUs.Paul Mundt
This adds support for the aforementioned CPU subtypes, and cleans up some build issues encountered as a result. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: math-emu supportTakashi YOSHII
This implements initial math-emu support, aimed primarily at SH-3. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Make O= builds work again.Paul Mundt
Some of the paths were a bit broken, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Drop incdir rule for SE7751.Paul Mundt
No longer needed.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Add support for R7780RP and R7780MP boards.Paul Mundt
This adds support for the Renesas SH7780 development boards, R7780RP and R7780MP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Board updates for I/O routine rework.Paul Mundt
This updates the various boards for some of the recent I/O routine updates. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Titan board support.Jamie Lenehan
Add support for the titan board. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: landisk board support.kogiidena
This adds support for the I-O DATA Landisk. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: hp6xx mach-type cleanups.Andriy Skulysh
Some minor cleanups for the updated consolidated hp6xx mach-type. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-06-09kconfig: integrate split config into silentoldconfigRoman Zippel
Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-06kbuild: change kbuild to not rely on incorrect GNU make behaviorPaul Smith
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-16[PATCH] sh: Move CPU subtype configuration to its own KconfigPaul Mundt
Currently the CPU subtype options are cluttering up arch/sh/Kconfig somewhat. Given that, this moves all of that in to its own arch/sh/mm/Kconfig. Things like cache configuration are also moved to this new location. This also adds support for strict CPU tuning on newer cores, which requires the addition of as-option. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] sh: Drop deprecated support for custom ramdisk embeddingPaul Mundt
sh had its own support for embedding ramdisk images in to the kernel binary, but people are using initramfs for this now, so we drop the ramdisk embedding. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11kbuild: rename prepare to archprepare to fix dependency chainSam Ravnborg
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare The dependency chain looks like this now: prepare | +--> prepare0 | +--> archprepare | +--> scripts_basic +--> prepare1 | +---> prepare2 | +--> prepare3 So prepare 3 is processed before prepare2 etc. This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed. prepare0 which build the asm-offsets.h file will need the actions performed by archprepare. The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09kbuild: h8300,m68knommu,sh,sh64 use generic asm-offsets.h supportSam Ravnborg
h8300, m68knommu, sh and sh64 all used the name asm-offsets.h so minimal changes required. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!