aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
AgeCommit message (Collapse)Author
2009-02-27sh: ap325rxa: Revert ov772x support.Paul Mundt
This change depends on some v4l changes that have been pushed back to 2.6.30, so drop this and fall back on the old soc_camera code until then. Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Acked-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: ap325rxa: Add ov772x support.Kuninori Morimoto
This patch add ov772x camera settings to ap325, Old camera is still supported. And it will be 2nd camera if you select ov772x and soc_camera_platform in same time. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: ap325rxa: control camera power toggling.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: sh7785lcr/highlander/hp6xx need linux/irq.h.Paul Mundt
More build fixes.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: Migo-R MMC support using spi_gpio and mmc_spi.Magnus Damm
This patch adds CN9 MMC support for MigoR using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: ap325rxa MMC support using spi_gpio and mmc_spiMagnus Damm
This patch adds CN3 MMC support for ap325rxa using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: mach-x3proto: needs linux/irq.h.Paul Mundt
Since commit ba84be2338d3a2b6020d39279335bb06fcd332e1 ("remove linux/hardirq.h from asm-generic/local.h"), the asm/irq.h definitions that mach-x3proto/setup.c depends on are no longer available, causing the build to die. So, include linux/irq.h explicitly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: convert rsk7203 to use smsc911x.Steve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: convert magicpanelr2 platform to use smsc911x.Steve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: convert ap325rxa platform to use smsc911x.Steve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: mach-migor: Add tw9910 support.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: mach-migor: Delete soc_camera_platform setup.Kuninori Morimoto
Migo-R can use ov772x camera driver in Linux 2.6.29. Therefore, soc_camera_platform setting is no longer needed. This patch removes it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: mach-migor: Add ov772x support.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Fix up pata_platform build breakage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: enable deferred io LCDC on Migo-RMagnus Damm
Enable LCDC deferred io on Migo-R using 1s delay. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add LCDC interrupt configuration to AP325 and Migo-RMagnus Damm
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off cf-enabler with extreme prejudice.Paul Mundt
Now that the rest of the boards that were using cf-enabler "generically" have switched to setting up their mappings on their own, only the mach-se boards were left using it. All of the cf-enabler using mach-se boards use a special initialization of the MRSHPC windows rather than going through the special PTE as other SH-4 platforms do. This consolidates the MRSHPC setup logic, hooks it up on the boards that care, and gets rid of any and all remaining references to cf-enabler. This has been long overdue, as cf-enabler has been the bane of arch/sh/kernel for the last 7 years. Good riddance. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-edosk7705: Fix up edosk7705 so it all builds again.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-microdev: Split out the fdc37c93xapm initialization code.Paul Mundt
This makes the microdev code a bit more readable, and moves the setup for the SuperIO out on its own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().Paul Mundt
This also fixes up a long-standing bug for this platform where the PIO base was set to a register offset, rather than the actual PIO offset itself. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.Paul Mundt
This gets rid of the cf enabler use on mach-sh03 and switches to use pata_platform with the proper address directly. cf_enabler is subsequently disabled for mach-sh03. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: board-shmin: Convert shmin to use __set_io_port_base().Paul Mundt
Drop the special mv_ioport_map() implementation, as this can simply use __set_io_port_base() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the cayman and microdev special heartbeat code.Paul Mundt
These can use the generic code instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Cayman boards from hw_interrupt_type to irq_chipMatt Fleming
I've been unable to even compile-test this change because I don't have an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have now been converted to use irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Dreamcast support from hw_interrupt_type to irq_chipMatt Fleming
Switch the dreamcast IRQ code over to the irq_chip way of doing things, so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Also, whilst I'm here change some things to make checkpatch.pl happy: - Indent with tabs, not with spaces - Include <linux/io.h>, not <asm/io.h> - Fix the multi-line comment style - Fix some typos in the comments Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert SystemH board support from hw_interrupt_type to irq_chipMatt Fleming
... as part of the hw_interrupt_type to irq_chip crusade. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Microdev boards from hw_interrupt_type to irq_chipMatt Fleming
This is part of the SH move to irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-migor: Kill off unused Migo-R machvec.Paul Mundt
This kills off the special Migo-R machvec, as nothing is using it. By default this will switch to using the generic machvec, which provides the same functionality. This saves us a bit of space in the machvec section. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add ov772x reset delay on Migo-RMagnus Damm
Add reset delay for the ov772x device on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt
RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: move the hp6xx pm codeMagnus Damm
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the platform directory together with the rest of the hp6xx pm code. This is done to let non-hp6xx platforms enable CONFIG_PM. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove ioport cruft and smc91x from se7343Magnus Damm
Remove out-of-date se7343 ioport code including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add isp1161 usb host device to se7343Magnus Damm
Add isp1161 platform data to get usb host working on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add st16c2550 devices to se7343Magnus Damm
Add 8250 platform data to setup the ST16C2550C chip on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix number of interrupts on se7343Magnus Damm
Fix to make sure that the on-board interrupt sources are included in the interrupt count on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile lcdc clock framework supportMagnus Damm
Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile ceu clock framework supportMagnus Damm
Add clock framework support to the sh_mobile ceu and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile keysc clock framework supportMagnus Damm
Add clock framework support to the sh_mobile keysc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-22sh: use 10MHz VIO_CLK for ov772x on Migo-RMagnus Damm
Use a slower VIO_CKO clock frequency for the ov772x on Migo-R. This improves the camera picture quality on Panel Board V2.1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: update ov772x byte order on Migo-RMagnus Damm
Update the ov772x byte sequence to enable byte swap. This to reflect the recent CEU driver change to follow incoming byte order. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Kill off unused port definitions.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: add support FLCTL for ap325rxa boardYoshihiro Shimoda
This patch adds platform_device for sh_flctl driver, NAND Flash simple partition, and GPIO setting. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: rsk7203: leds-gpio support for RSK+ LEDs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: fix soc-camera compile breakage on Migo-R.Guennadi Liakhovetski
Fix Migo-R compile breakage caused by incomplete merge. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: Fix up the SH7203 build.Paul Mundt
The sh7203.h include paths were missed in the previous update, so switch the include path to cpu/ as with the rest. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Migrate common board headers to mach-common/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Move the CPU definition headers from asm/ to cpu/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 22:16:16 +0000