aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
AgeCommit message (Collapse)Author
2010-03-23sh: ms7724: Add tiny-document for soundKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_initKuninori Morimoto
i2c_put_adapter is needed after i2c_get_adapter Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: Fix up ctrl_read/write stragglers in migor setup.Paul Mundt
ctrl_read/writeX are deprecated, this converts them over to their __raw_read/write() counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: audio support for the sh7722 Migo-R boardGuennadi Liakhovetski
Configure SIU port B pins and register the WM8978 audio codec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26soc-camera: ov772x: Modify buswidth controlKuninori Morimoto
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26sh: remove dead LED code for migo-r and ms7724seMagnus Damm
CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec build fix for CONFIG_I2C=nMagnus Damm
Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec r-standby supportMagnus Damm
This patch adds board specific r-standby resume code for ecovec. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ms7724se r-standby supportMagnus Damm
This patch adds board specific r-standby resume code for ms7724se. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: modify scan_timing for KEYSCKuninori Morimoto
KEYSC::SCN register of SH7724 is 3bit. Thus, scan_timing should be 0 - 7 here. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: Add sh_sir supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: mach-ecovec24: Add sh_sir supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: sh7724: Update FSI/SPU2 clockKuninori Morimoto
When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: always enable sh7724 vpu_clk and set to 166MHz on EcovecMagnus Damm
Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7724 INTC table and update the SDHI platform data for Ecovec24, KFR2R09 and MS7724SE. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7723/AP325 SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7723 INTC table and update the SDHI platform data for AP325. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7722/Migo-R SDHI vector mergeMagnus Damm
Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-dreamcast: Convert to sparseirq.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-se: Convert SH7724 solution engine FPGA to sparseirq.Paul Mundt
This uses the new create_irq_nr() to build up the FPGA's desired virtual IRQ mapping and permits us to finally flip on sparseirq for this board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02Merge branch 'sh/stable-updates'Paul Mundt
2010-01-30sh: mach-se: Fix up irq_desc reference.Paul Mundt
The irq_desc needs to be accessed with irq_to_desc(), this fixes up a build error with irq_desc being undefined. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-28sh: mach-titan: Kill off unused PIO port mangling.Paul Mundt
Nothing is using this, kill it off. Fixing up access sizes can be done with trapped I/O for anyone wanting to make use of this for devices that need it, everything else is already pure MMIO. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26sh: Mass ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Probe system FPGA area mapping.Paul Mundt
This implements dynamic probing for the system FPGA. The system reset controller contains a fixed magic read word in order to identify the FPGA. This just utilizes a simple loop that scans across all of the fixed physical areas (area 0 through area 6) to locate the FPGA. The FPGA also contains register information detailing the area mappings and chip select settings for all of the other blocks, so this needs to be done before we can set up anything else. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: reset controller reboot support.Paul Mundt
This wires up the machine_ops reboot call to use the system reset controller. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Split out FPGA IRQ controller setup.Paul Mundt
This moves out the FPGA IRQ controller setup code to its own file, in preparation for switching off of IRL mode and having it provide its own irq_chip. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: FPGA updates.Paul Mundt
This does a bit of refactoring of the FPGA management code. The primary FPGA initialization is moved out to its own file in preparation for implementing some of the more complex capabilities, a complete set of register definitions is provided, and all of the existing users in the board code are moved over to use the new interface instead of setting up overlapping mappings. This also corrects the FPGA size, which previously was chomped off at the SDIF control register. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Fix up sdk7780 and urquell builds.Paul Mundt
These two got broken in the heartbeat private data conversion, fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: urquell: Handle EXTAL configuration here, too.Paul Mundt
urquell happens to use the same mode pins and EXTAL configuration as SDK7786, so just copy it over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: mach-sdk7786: Detect/configure/propagate EXTAL.Paul Mundt
This uses the mode pins exposed through the FPGA to work out whether we're driven from EXTAL or not and does the appropriate setup and propagation through the clock framework. This will also -EINVAL out for anyone adding in their own oscillators, forcing proper configuration with the clock framework instead of proceeding on with bogus clock values. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Convert p3_ioremap() users to ioremap_prot().Paul Mundt
This kills off the ancient p3_ioremap(), converting over to the more generic ioremap_prot() instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: Prevent 64-bit pgprot clobbering across ioremap implementations.Paul Mundt
Presently 'flags' gets passed around a lot between the various ioremap helpers and implementations, which is only 32-bits. In the X2TLB case we use 64-bit pgprots which presently results in the upper 32bits being chopped off (which handily include our read/write/exec permissions). As such, we convert everything internally to using pgprot_t directly and simply convert over with pgprot_val() where needed. With this in place, transparent fixmap utilization for early ioremap works as expected. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18Merge branch 'sh/stable-updates'Paul Mundt
2010-01-18sh: ms7724: Correct sh-eth EEPROM polling timeout.Kuninori Morimoto
This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-16sh: Use ioremap_fixmed to map the SM501 DRAM config registerMatt Fleming
We need to write to the DRAM config register very early and at such an early stage ioremap() is not available. So use ioremap_fixed() to map the register. The reason that we are avoiding using the legacy P2 mapping is that there will come a day when the legacy P2 mappings no longer exist. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-01-15sh: Generalize SH7786 PCIe support.Paul Mundt
Previously this was only built in for Urquell boards, but the same approach can be used on SDK7786 now that the mode pin reading is supported, so make it generic to SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: mach-sdk7786: mode pins support.Paul Mundt
This wires up the mode pins support on the SDK7786. The pins are standard SH7786 pins, and all are fixed in software. Needed for the clock framework, PCIe, and so forth. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: heartbeat: Update boards for access size hinting.Paul Mundt
This updates the existing boards that specify the register width through platform data to use the resource flags instead. This eliminates platform data completely in most cases, and permits further improvement in the heartbeat driver as well as shrinking the overall private data size. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: mach-sdk7786: heartbeat support.Paul Mundt
Hand off the user LEDs to the heartbeat driver. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: mach-ecovec24: Add motion sensor driver support.NISHIMOTO Hiroki
This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14sh: Preliminary SDK7786 board support.Paul Mundt
This stubs in some preliminary board support for the RTE SDK7786. This is quite stunted at the moment, and primarily builds on top of the system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity, with initial peripheral support restricted to the debug ethernet. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-12sh: mach-se: Convert SE7343 FPGA to dynamic IRQ allocation.Paul Mundt
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA interrupt controller and switches over to a completely dynamic set. No assumptions regarding a contiguous range are made, and the platform resources themselves need to be filled in lazily. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24sh: mach-ecovec24: setup.c detailed correctionKuninori Morimoto
o remove unused define o add device name comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
2009-12-16V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict ↵Guennadi Liakhovetski
sizes, add platform data It has been experimentally found out, that the sensor only supports up to 512x384 video output and also has some restrictions on minimum scale. We disable non-working size ranges until, maybe, someone finds out how to properly set them up. Also add cropping support, an auto white balance control, platform data to specify master clock frequency and polarity of the IOCTL pin. create mode 100644 include/media/rj54n1cb0c.h Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13659): soc-camera: convert to the new mediabus APIGuennadi Liakhovetski
Convert soc-camera core and all soc-camera drivers to the new mediabus API. This also takes soc-camera client drivers one step closer to also be usable with generic v4l2-subdev host drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in ↵Guennadi Liakhovetski
struct soc_camera_link After this change drivers can be further extended to not fail, if they don't get platform data, but to use defaults. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16sh: Fix test of unsigned in se7722_irq_demux()Roel Kluin
se7722_fpga_irq[] is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add FSI sound supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>