aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
AgeCommit message (Collapse)Author
2008-10-23sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-22sh: use 10MHz VIO_CLK for ov772x on Migo-RMagnus Damm
Use a slower VIO_CKO clock frequency for the ov772x on Migo-R. This improves the camera picture quality on Panel Board V2.1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: update ov772x byte order on Migo-RMagnus Damm
Update the ov772x byte sequence to enable byte swap. This to reflect the recent CEU driver change to follow incoming byte order. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Kill off unused port definitions.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: add support FLCTL for ap325rxa boardYoshihiro Shimoda
This patch adds platform_device for sh_flctl driver, NAND Flash simple partition, and GPIO setting. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: rsk7203: leds-gpio support for RSK+ LEDs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: fix soc-camera compile breakage on Migo-R.Guennadi Liakhovetski
Fix Migo-R compile breakage caused by incomplete merge. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: Fix up the SH7203 build.Paul Mundt
The sh7203.h include paths were missed in the previous update, so switch the include path to cpu/ as with the rest. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Migrate common board headers to mach-common/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Move the CPU definition headers from asm/ to cpu/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: reduce Migo-R smc91x overrunsMagnus Damm
Improve Migo-R ethernet performance by reducing smc91x overruns. This is done by enabling SMC91X_NOWAIT and optimizing CS4 setup. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Merge branch 'sh/gpiolib'Paul Mundt
2008-10-20sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA boardNobuhiro Iwamatsu
Renesas AP325RXA board has Epson RX-8564LC of RTC. This patch supports RTC of this board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7720 GPIO on magicpanelr2 boardMagnus Damm
This patch hooks up the magicpanelr2 board with the sh7720 pinmux code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7203 GPIO on rsk7203 boardMagnus Damm
Make the rsk7203 board use the newly added sh7203 pinmux code. Only a single LED plus the serial console pins for now. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7723 GPIO on AP325RXA boardMagnus Damm
This patch enables the GPIO code on AP325RXA and converts the code from register based pinmux configuration to GPIO based pin by pin setup. While at it 2 LEDs and one switch are added and exported to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7722 GPIO on Migo-R boardMagnus Damm
This patch enables the GPIO code on Migo-R and converts the code from register based pinmux configuration to GPIO based pin by pin setup. Fix whitespace damage while at it and add 2 LEDs and export them to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt
This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-24sh: ap325rxa: create CPLD data area in mtdNobuhiro Iwamatsu
AP320 and AP325RXA has CPLD data in NOR Flash. If this area erased, this board can not boot. This patch create CPLD data area and set writeable mask bit. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21sh: edosk7760: Correct size of bootloader flash partition.Luca Santini
This is 256K instead of 1M. [ Converted to use asm/sizes.h. -- PFM ] Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12sh: edosk7760 physmap-flash support.Luca Santini
Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Add Renesas EDOSK7760 board support.Luca Santini
This adds support for the Renesas (RTE) EDOSK7760 board. Currently supported devices are: - ramdisk support - ethernet support - nfs support - ext2/ext3 support - i2c support - fb support (M) Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11video: export sh_mobile_lcdc panel sizeMagnus Damm
Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Add support sh7760fb to sh7763rdp boardNobuhiro Iwamatsu
Add sh7760fb platform device to sh7763rdp's setup. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Add support sh_eth to sh7763rdp boardNobuhiro Iwamatsu
SH7763 has sh_eth device. This patch add sh_eth platform device to this board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: mach-x3proto: Fix up smc91x platform data.Paul Mundt
smc91x on x3proto needs 16-bit access and nowait, which we can now do through the platform data. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-05remove unneeded #include <linux/ide.h>'sAdrian Bunk
This patch remove unneeded #include <linux/ide.h>'s. It also adds a required #include <linux/interrupt.h> that was previously implicitely pulled by ide.h Signed-off-by: Adrian Bunk <bunk@kernel.org> [bart: revert change to tests/lkdtm.c (spotted by Stephen Rothwell)] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05remove unnecessary <linux/hdreg.h> includesBartlomiej Zolnierkiewicz
Following files don't need <linux/hdreg.h> at all: - arch/mips/jazz/setup.c - arch/sh/boards/mach-systemh/irq.c - drivers/macintosh/mediabay.c - drivers/scsi/hptiop.c - drivers/usb/storage/freecom.c - arch/powerpc/include/asm/ide.h - init/main.c Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-03arch/sh/boards/mach-se/7343/irq.c: removed duplicated #includeHuang Weiyi
Removed duplicated include <linux/irq.h> in arch/sh/boards/mach-se/7343/irq.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03arch/sh/boards/board-ap325rxa.c: removed duplicated #includeHuang Weiyi
Removed duplicated include <linux/delay.h> in arch/sh/boards/board-ap325rxa.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03sh/boards/Makefile typo fixAdrian Bunk
The following build error was caused by an obvious typo: <-- snip --> ... LD arch/sh/mm/built-in.o make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'. Stop. <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30sh: Move out individual boards without mach groups.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: More header path fixups for mach dir refactoring.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Move out the solution engine headers to arch/sh/include/mach-se/Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: I2C fix for AP325RXA and Migo-RMagnus Damm
Fix recently introduced I2C build breakage on AP325RXA and Migo-R. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Shuffle the board directories in to mach groups.Paul Mundt
This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Fix compile error of Solution EngineNobuhiro Iwamatsu
When I compiled Solution Engine, this become compile error because plaform device of sh_eth device becomes enable. When sh7710/sh7712 which could use sh_eth was chosen, revised it so that platform device of sh_eth device became enable. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: dreamcast: fix build failure from header reorg.Paul Mundt
Oops, machvec.h is in asm/, it was previously removed due to overzealous trimming. Fix up the path again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: migrate to arch/sh/include/Paul Mundt
This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: rsk7203: Add smc911x platform data.Paul Mundt
This hooks up platform data for the SMC9118 on the RSK+7203. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: SuperH Mobile CEU and camera platform data for AP325RXAMagnus Damm
Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Update smc911x platform data for AP325RXAMagnus Damm
Pass board specific smc911x parameters using struct smc911x_platdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: SuperH Mobile LCDC platform data for AP325RXAMagnus Damm
Add LCD panel platform data for the AP325RXA board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile CEU platform data for Migo-RMagnus Damm
Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile LCDC platform data for Migo-RMagnus Damm
Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7343 / SE77343Magnus Damm
Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722Magnus Damm
Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7723 / ap325rxaMagnus Damm
Use clk_always_enable() on the sh7723 processor and in the ap325rxa board code. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Renesas R0P7785LC0011RL board supportYoshihiro Shimoda
This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>