aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/configs
AgeCommit message (Collapse)Author
2008-01-28sh: Add support for SDK7780 board.Nicholas Beck
Add support for Renesas Technology Europe SDK7780 board. Signed-off-by: Nicholas Beck <nbeck@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off dead HS771RVoIP board support.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Update SE7712 PCLK definition.Andrew Murray
This patch provides a correct value for CONFIG_SH_PCLK_FREQ for the SH7712 solution engine when used with the board's default factory settings. This results in the board running at its maximum CPU clock rate (200 MHz). Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off the mach-harp and mach-sim machtypes.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Update cayman defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move sh64 board defconfigs to arch/sh/configs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23sh: include ax88796 in the defconfig for r7785rpMagnus Damm
This patch adds the ax88796 device driver to the r7785rp defconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23sh: include ax88796 in the defconfig for r7780mpMagnus Damm
This patch adds the ax88796 device driver to the r7780mp defconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02sh: Update r7785rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Initial SH-X3 SMP support.Paul Mundt
This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Enable maple by default for the Dreamcast.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel MTD mapping update.Markus Brunner
This update moves the flash mapping for the Magic Panel into the board setup. It also removes references to the old MTD mapping option in the defconfig. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: update defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel R2 board support.Markus Brunner
This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Enable pata_platform in defconfig.Kristoffer Ericson
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: update hp6xx defconfig.Kristoffer Ericson
hp6xx_defconfig resync. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: defconfigs for R2D-PLUS and for R2D-1Magnus Damm
This patch removes the old r2d config file named rts7751r2d_defconfig and adds separate config files for the two r2d board versions. The two new defconfigs are identical with the exception of board selection: - rts7751r2dplus_defconfig selects CONFIG_RTS7751R2D_PLUS=y - rts7751r2d1_defconfig selects CONFIG_RTS7751R2D_1=y Please remember to update both files with r2d changes in the future. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03sh: fix defconfigs for sh7751r boardsMagnus Damm
This patch fixes up the defconfig for various sh7751r based boards by updating them to the single cpu subtype CONFIG_CPU_SUBTYPE_SH7751R. The following sh4 boards are updated: hs7751rvoip, landisk, lboxre2, systemh, titan. The current defconfigs with two subtypes defined trigger a configuration bug which result in kernel configurations with missing board support code. We end up with kernels without board code and with generic machvec only. So we need this patch to make sure the board code gets compiled in. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03sh: update r2d defconfigMagnus Damm
- Disable CONFIG_SH_DMA to avoid boot up freeze on R2D-1 - Disable CONFIG_SH_STANDARD_BIOS to support R2D-PLUS boot loaders Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03sh: update snapgear defconfig.David McCullough
Updated the snapgear defconfig to get a booting kernel. Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - add support for SH7750 and its variantsMagnus Damm
This patch converts the cpu specific 7750 setup code to use the new intc controller. Many new vectors are added and multiple processor variants including 7091, 7750, 7750s, 7750r, 7751 and 7751r should all have the correct vectors hooked up. IRLM interrupts can be enabled using ipr_irq_enable_irlm() which now is marked as __init. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: update r2d defconfig and fix SH7751R pci compliationMagnus Damm
This patch updates the r2d board support in a few ways: - CPU_SUBTYPE_SH7751R is selected in the defconfig to play well with the r2d board Kconfig entry. Without this the defconfig results in no board enabled. - Enable EARLY_PRINTK. - Enable SH_STANDARD_BIOS - this works well for early printk on the r2d board. - Add "earlyprink=bios" to the cmdline for early serial port output by default. - CONFIG_SUBTYPE_SH7751R support is added to the sh-specific pci makefile. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - add support for 7780Magnus Damm
This patch converts the cpu specific 7780 setup code to use the new intc controller. Many new vectors are added and also support for external interrupt sense configuration. So with this patch it is now possible to configure external interrupt pins as edge or level triggered using set_irq_type(). No external interrupts are registered by default. Use plat_irq_setup_pins() to select between IRQ or IRL mode. This patch also fixes the Alarm IRQ for the RTC. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: clean up interrupt code for solution engine 7722 boardMagnus Damm
This patch cleans up solution engine 7722 specific interrupt code. The main purpose is to replace the mux function with use of set_irq_chained_handler() and replace hard coded register poking code with set_irq_type(). The board specific interrupts are also moved to start from SE7722_FPGA_IRQ_BASE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: Fix irq assignment for uarts on sh7722Magnus Damm
This patch contains two serial port related fixes for sh7722: - Make sure the irqs for the first serial port is correct - Add the second and third serial port to the platform data Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13sh: Update r7785rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-07sh: Update dreamcast defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20Merge branch 'x3'Paul Mundt
2007-06-20sh: Preliminary support for the SH-X3 CPU.Paul Mundt
This adds basic support for UP SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Update se7722 defconfig.Paul Mundt
Hook up the multi-node stuff for the SE7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: Update SH-2/SH-2A defconfigs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11sh: Provide a defconfig for R7780MP.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Update r7780rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine 7722 board support.Ryusuke Sakato
This adds more full-featured support for the SH7722 Solution Engine. Previously this was using the generic board, and lacked most of the peripheral support. Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine SH7705 board and CPU updates.Nobuhiro Iwamatsu
This fixes up SH7705 CPU support and the SE7705 board for some of the recent changes. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7780 Solution Engine board support.Nobuhiro Iwamatsu
This adds support for the SH7780-based Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add defconfig for se7722.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add defconfig for se7712.Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: L-BOX RE2 support.Nobuhiro Iwamatsu
This adds support for the L-BOX RE2 router. http://www.nttcom.co.jp/l-box/ L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial, and LAN x2. This is one of the very few SH boards that a general person can obtain now. The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch adding it to current git. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Enable SM501 support for RTS7751R2D.Paul Mundt
This enables the SM501 drivers for the R2D board. Additional work needs to be done to migrate off of the VoyagerGX cchip code to make use of the rest of the mfd infrastructure. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15sh: rts7751r2d board updates.Paul Mundt
This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Solution Engine 7750's defconfig update.Nobuhiro Iwamatsu
Update se7750_defconfig. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: landisk board build fixes.Paul Mundt
Get the landisk board building again.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: SH-2 defconfig updates.Yoshinori Sato
This adds a new defconfig for SE7619 and updates SE7206. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: update r7780rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for Solution Engine 7206 and 7619 boards.Yoshinori Sato
This adds support for the Solution Engine 7206 and 7619. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 16:37:37 +0000