aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel/cpu
AgeCommit message (Collapse)Author
2007-08-22sh: missing symbol fix for sh4-202Magnus Damm
This patch adds a plat_irq_setup() symbol for sh4-202. Without this fix it is impossible to build a working kernel using the microdev_defconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01sh: Fix lockdep debugging oops on SH-3/4.Paul Mundt
In the SH-3/4 TLB access violation path we were enabling IRQs before the call in to trace_hardirqs_on(), which ended up triggering: if (DEBUG_LOCKS_WARN_ON(!irqs_disabled())) return; in kernel/lockdep.c:2031. Fix this up by removing the early re-enable, we were already re-enabling IRQs post-trace_hardirqs_on() already, so the semantics are now as was initially intended. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: Silence sq compile warning on sh4 nommu.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove old broken pint codeMagnus Damm
The code in arch/sh/kernel/cpu/irq/pint.c doesn't compile, so let's get rid of it to make space for a future pint implementation on top of intc. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - add support for SH7750 and its variantsMagnus Damm
This patch converts the cpu specific 7750 setup code to use the new intc controller. Many new vectors are added and multiple processor variants including 7091, 7750, 7750s, 7750r, 7751 and 7751r should all have the correct vectors hooked up. IRLM interrupts can be enabled using ipr_irq_enable_irlm() which now is marked as __init. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: Support rate rounding for SH7722 FRQCR clocks.Paul Mundt
Now that the round_rate() op is supported, hook it up on SH7722 for the FRQCR (CPU, PCLK, etc.) clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: Implement clk_round_rate() in the clock framework.Paul Mundt
This is an optional component of the clock framework. However, as we're going to be using this in the cpufreq drivers, add support for it to the framework. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - add support for 7780Magnus Damm
This patch converts the cpu specific 7780 setup code to use the new intc controller. Many new vectors are added and also support for external interrupt sense configuration. So with this patch it is now possible to configure external interrupt pins as edge or level triggered using set_irq_type(). No external interrupts are registered by default. Use plat_irq_setup_pins() to select between IRQ or IRL mode. This patch also fixes the Alarm IRQ for the RTC. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - improve group supportMagnus Damm
This patch improves intc group support, ie it makes it possible to group interrupts together and mask / unmask the entire group. This also works with priorities, so setting a priority for an entire group is also possible. This patch is needed to properly support certain processors such as the 7780. Fixes for NULL pointers in DECLARE_INTC_DESC() are also included. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: IPR/INTC2 IRQ setup consolidation.Magnus Damm
This patch unifies the cpu specific interrupt setup functions for interrupt controller blocks such as ipr, intc2 and intc. There is no point in having separate functions for each interrupt controller, so let's clean this up. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - add support for 7722 processorMagnus Damm
This patch converts the cpu specific 7722 setup code to use the new intc controller. Many new vectors are added and also support for external interrupt sense configuration. So with this patch it is now possible to configure external interrupt pins as edge or level triggered using set_irq_type(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: intc - shared IPR and INTC2 controllerMagnus Damm
This is the second version of the shared interrupt controller patch for the sh architecture, fixing up handling of intc_reg_fns[]. The three main advantages with this controller over the existing ones are: - Both priority (ipr) and bitmap (intc2) registers are supported - External pin sense configuration is supported, ie edge vs level triggered - CPU/Board specific code maps 1:1 with datasheet for easy verification This controller can easily coexist with the current IPR and INTC2 controllers, but the idea is that CPUs/Boards should be moved over to this controller over time so we have a single code base to maintain. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: Fix irq assignment for uarts on sh7722Magnus Damm
This patch contains two serial port related fixes for sh7722: - Make sure the irqs for the first serial port is correct - Add the second and third serial port to the platform data Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-16sh: sh-rtc support for SH7709.Kristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Preliminary support for the SH-X3 CPU.Paul Mundt
This adds basic support for UP SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Hook up hard_smp_processor_id() for INTC2 block.Paul Mundt
We need to know the CPU ID in order to calculate the mask and ack registers effectively. Stub this in for UP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: rework ipr codeMagnus Damm
This patch reworks the ipr code by grouping the offset array together with the ipr_data structure in a new data structure called ipr_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. This strategy has much in common with the recently merged intc2 code. One logic change has been made - the original ipr code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: rework intc2 codeMagnus Damm
The shared intc2 code currently contains cpu-specific #ifdefs. This is a tad unclean and it prevents us from using the shared code to drive board-specific irqs on the se7780 board. This patch reworks the intc2 code by moving the base addresses of the intc2 registers into struct intc2_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. One logic change has been made - the original shared intc2 code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11sh: Fixup misaligned data for sh2 lockdep.Paul Mundt
lockdep/irqflags tracing on SH-2 ends up with a misaligned branch, fix it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11sh: Tidy up dependencies for SH-2 build.Paul Mundt
SH-2 can presently get in to some pretty bogus states, so we tidy up the dependencies a bit and get it all building again. This gets us a bit closer to a functional allyesconfig and allmodconfig, though there are still a few things to fix up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off dead SH7604 support.Paul Mundt
This was added during 2.5.x, but was never moved along. This can easily be resurrected if someone has one they wish to work with, but it's not worth keeping around in its current form. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fix the SH7722 flatmem build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: URAM node support for SH7722.Paul Mundt
This adds the URAM block on SH7722 as a separate node. Sparsemem is required for this, or it can simply be disabled by explicitly selecting a flatmem model. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fix SH-4 CPU selects.Paul Mundt
Now that select no longer works for selecting the "closest" CPU, we have to explicitly reference the precise sub-type in the few places where it actually matters (presently only setup code and some legacy sh-sci cruft). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix SH4-202 clock fwk set_rate() mismatch.Paul Mundt
With the SH7722 changes, ->set_rate() also takes an algo_id, SH4-202 was overlooked when this change went in. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix in_nmi symbol build error.Paul Mundt
If CONFIG_KGDB_NMI is disabled, we're left with a stray in_nmi reference that can't be resolved. Move the symbol under the ifdef, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: trivial build cleanups.Evgeniy Polyakov
Several errors were spotted during building for custom config (SMP included). Although SMP still does not compile (no ipi and __smp_call_function) and does not work, this looks a bit cleaner. Some other errors obtained via gcc-4.1.0 build. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Fix pcrel too far for in_nmi label.Takashi YOSHII
Add lost in_nmi definition to solve pcrel too far. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix clock multiplier on SH7722.dmitry pervushin
This fixes up the master clock multiplier and initial rate propagation for the SH7722 clocks. Signed-off-by: dmitry pervushin <dimka@nomadgs.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix up various compile warnings for SE boards.Paul Mundt
- setup-sh7750.c only defines the sh7751_ipr_map when building with SH7751 support. - 7722 Solution Engine was missing a mach-type entry, causing the macro in cf-enabler to be undefined. - arch/sh/mm/init.c needs linux/pagemap.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21spelling fixes: arch/sh/Simon Arlott
Spelling fixes in arch/sh/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix stacktrace simplification fallout. sh: SH7760 DMABRG support. sh: clockevent/clocksource/hrtimers/nohz TMU support. sh: Truncate MAX_ACTIVE_REGIONS for the common case. rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq(). sh: Convert to common die chain. sh: Wire up utimensat syscall. sh: landisk mv_nr_irqs definition. sh: Fixup ndelay() xloops calculation for alternate HZ. sh: Add 32-bit opcode feature CPU flag. sh: Fix PC adjustments for varying opcode length. sh: Support for SH-2A 32-bit opcodes. sh: Kill off redundant __div64_32 symbol export. sh: Share exception vector table for SH-3/4. sh: Always define TRAPA_BUG_OPCODE. sh: __GFP_REPEAT for pte allocations, too. rtc: rtc-sh: Fix up dev_dbg() warnings. sh: generic quicklist support.
2007-05-09fix file specification in commentsUwe Kleine-König
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09sh: Add 32-bit opcode feature CPU flag.Paul Mundt
Add a CPU flag for the CPUs that support 32-bit opcodes, which gets passed down to userspace. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Fix PC adjustments for varying opcode length.Paul Mundt
There are a few different cases for figuring out how to size the instruction. We read in the instruction located at regs->pc - 4 when rewinding the opcode to figure out if there's a 32-bit opcode before the faulting instruction, with a default of a - 2 adjustment on a mismatch. In practice this works for the cases where pc - 4 is just another 16-bit opcode, or we happen to have a 32-bit and a 16-bit immediately preceeding the pc value. In the cases where we aren't rewinding, this is much less ugly.. We also don't bother fixing up the places where we're explicitly dealing with 16-bit instructions, since this might lead to confusion regarding the encoding size possibilities on other CPU variants. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Support for SH-2A 32-bit opcodes.Paul Mundt
SH-2A supports both 16 and 32-bit instructions, add a simple helper for figuring out the instruction size in the places where there are hardcoded 16-bit assumptions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Share exception vector table for SH-3/4.Paul Mundt
The only difference between these at the moment are the FPU exceptions, and these are hidden away under CONFIG_SH_FPU (which is only set for the SH-4 case anyways..). This consolidates the two tables, and updates SH-4 to use the updated copy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: R7785RP board updates.Ryusuke Sakato
Some fixups for the R7785RP board. Gets iVDR working. Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Wire up more IRQs for SH7709.Takashi YOSHII
hp6xx requires some additional IRQs that aren't currently enabled in the SH7709 setup code. Wire them up. Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com> Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Move clock reporting to its own proc entry.Paul Mundt
Previously this was done in cpuinfo, but with the number of clocks growing, it makes more sense to place this in a different proc entry. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine SH7705 board and CPU updates.Nobuhiro Iwamatsu
This fixes up SH7705 CPU support and the SE7705 board for some of the recent changes. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7722 clock framework support.dmitry pervushin
This adds support for the SH7722 (MobileR) to the clock framework. Signed-off-by: dmitry pervushin <dimka@nomadgs.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: MS7712SE01 board support.Nobuhiro Iwamatsu
Support the SH7712 (SH3-DSP) Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: speculative execution support for SH7780.Paul Mundt
SH7780 has a speculative execution mode where it can speculatively perform an instruction fetch for subroutine returns, this allows it to be enabled. There are some various pitfalls associated with this mode, so it's left as depending on CONFIG_EXPERIMENTAL and not enabled by default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14sh: Fix bogus regs pointer in do_IRQ().Paul Mundt
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even setting it in the first place. This ended up with some rather broken behaviour in the sysrq show_regs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12sh: Fix SH-3 cache entry_mask and way_size calculation.Paul Mundt
The code for performing the calculation was only in the SH-4 probe path, move it out to the common path so the other parts get this right too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 01:11:56 +0000